Tender For Addition/Alteration/Improvement To Tech Complex And Special Repair/Replacement To Tech Flt Desk At Afs Hakimpet Under Ge (Af) Hakimpet
Tender Value
36.40 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
13 days left
EMD
72800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration/Improvement To Tech Complex And Special Repair/Replacement To Tech Flt Desk At Afs Hakimpet Under Ge (Af) Hakimpet
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed by Engineer-in-charge. |
| 2 | Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed by Engineer-in-charge.. |
| 3 | S&F Factory made single extruded approved colored/wood finish WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat double Rebate of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 5 | Supply and fix factory made 35 mm thick second class hard wood both side laminated plain framed paneled shutters (two panels) with lock rail and panels of 9 mm BWP commercial ply or 12 mm veneered particle board for others with commericial veneering on both faces and size of members of door shutters as per IS :1003(part I ) as specified in SSR part I section 3 clause 8.20 (a) fitted to chowkats, kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-charge. by the Engineer-in-Charge |
| 6 | M&L 1mm thick Laminate sheet (sunmyca sheet) glossy finish any colour paste with favicol on plywood/ Block board for cabinet and cupbord, commercial type on one sides complete, as specified and directed |
| 7 | S&F Factory made single extruded approved colored/wood finish WPC (Wood Polymer Composite) solid skeleton door shutter of 30mm thick for mesh door comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, door of approved colour and pattern all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 8 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | S&F 100 mm long Butt hinges , heavy weight , cold rolled mild steel and fixed for flush pressed steel door frame complete all as directed by Engineer in charge |
| 10 | S&F 200 mm size aluminium tower bolts stove enamelled black with bright bolt and fixed complete all as directed by Engineer in charge |
| 11 | S&F 150 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by Engineer-in-charge. by the Engineer-in-Charge |
| 12 | S&F 150 mm size extruded alumimium door handles fabricated type complete all as directed by Engineer in charge |
| 13 | S&F 200 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixingclips of sheet, cast or extrudedsections and fixing bolts andsliding bolts of extrudedsections or cast-aluminium alloy and fixed complete all as directed by Engineer in charge |
| 14 | M&L for Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed. |
| 15 | S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring,fixed in floor complete all as directed by Engineer in charge |
| 16 | M&L for preparing new wood and wood based Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and appying two coats of synthetic enamel paint over a coat of pink primer complete all as directed by Engineer in charge |
| 17 | S&F Factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories is included and packing the gaps with silicon sealent complete all as specified and as directed by Engineer-in-charege.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)(B) Area exceeding 2.00 sqm each |
| 18 | S&F factory made uPVC white colour fixed window/ventilator made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass along with Silicon sealent complete all as directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)(A) Area not exceeding 1.00 sqm each. |
| 19 | S&F Sheet glass of exc 0.5 sqm, ordinary quality and glazing with oil putty in each pane complete all as specified and as directed by Engineer-in-charge.,thickness of glass of 5.5 mm complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed and specified by Engr-in-Charge. |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises. |
| 22 | M&L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) laid in flooring as specified and directed by Engineer In charge. |
| 23 | M&L for non skid colour ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:4) coloured tiles complete all as specified and as directed by Engineer-in-charege. |
| 24 | M&L Glazed Ceramic tiles coloured, of size 450mm X 350mm / 300mm X 7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry including 10mm thick in cement mortar 1:4, scoured for fixing tiles /stone slabs in skirting/ dados and pointed with white/ coloured cement to match the colour of tiles complete all as specified and as directed by Engineer-in-charege.Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above.Note: Mitred tiling to be done at external corners with a cut at a 45 degree angle along the edge of the tile and the cost is included in rate quoted above |
| 25 | M&L Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-charege. |
| 26 | M&L Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in skirting in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-charege. |
| 27 | S&F in repair vitreous China wash hand basin white,oval type,size 580X450 mm including cutting for pinning in ends of brackets,complete all as specified and as directed by Engineer-in-charege. |
| 28 | S&F in repair 15 mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure complete all as specified and as directed by Engineer-in-charege. |
| 29 | Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and as directed by Engineer-in-charege. |
| 30 | S&F in Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in repairs complete all as specified and as directed by Engineer-in-charege. |
| 31 | S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and as directed by Engineer-in-charege. |
| 32 | S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs complete all as specified and as directed by Engineer-in-charege. |
| 33 | Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs complete all as specified and as directed by Engineer-in-charege. |
| 34 | S & F in repair for vitreous china, half stall urinal white with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engineer-in-charge. |
| 35 | S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 36 | S&F 600 x 450 mm bevelled edge mirror of selected quality glass mounted on frameless and fixed to wooden plugs with chromium plated brass screws and cup washers in repairs complete all as directed by the Engr-in-Charge. |
| 37 | S&F in repair for 15mm dia Two way bib cock CP fancy type fixed to GI pipe complete all as specified and as directed by Engineer-in-charege. |
| 38 | S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and as directed by Engineer-in-charege. |
| 39 | S & F Water closet 'S' trap ivory colour 680 x 370 x 750 mm with soft close seat cover ith twin flushing cistern fitted on floor with wall distance 225mm +/- 10mm from the wall complete all as specified and as directed by Engineer-in-charege. Make: CERA/Parryware or equivalent |
| 40 | S&F false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fiber Reinforced Gypsum ) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than2%, humidity resistance of 99%, NRC 0.5-0.75 as per IS 8225:1987, Non combustable as per BS 476 (part 4 )-1970 and light reflectance 85% min to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120 grams per sqm including both sides) comprising of main -T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15x32 mm of length1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items ( galvanising @ 80 gms per sqm) i.e. 50mm long, 8 mm outer diameter M6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall SS screws all as specified and directed by Engr-in -charge. Make : Diamond,Gyproc or equivalent |
| 41 | Dismantling of ceiling /panelling boarding, any description, fixed in any position with screws & any type complete all as specified and as directed by Engineer-in-charege. |
| 42 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 43 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed by Engineer-in-charege. |
| 44 | Supply and fix Vaccum sealed 19mm thick DGU (Double Glazed Unit) toughen glass shutter fix in position incl. all fitting and fixture and complete all as specified and as directed by Engineer-in-charege. |
| 45 | S & F 1000 Lts Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with all necessary fittings required as tank nipple, etc all as specified in SSR Part I including dismantling old or u/s water tanks and moving to stores complete all as specified and as directed by Engineer-in-charege. |
| 46 | S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(Minimum weight 15mm-142gms/ 20mm-210gms/25mm-455gms/40mm-690 gms) complete all as specified and as directed by Engineer-in-charege. |
| 47 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe complete all as specified and as directed by Engineer-in-charege. |
| 48 | S&F Anodised aluminium frame for doors,windows and partitions with one or more rebates including cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-charge. |
| 49 | S&F Anodised aluminium door shutters/Partitions , aluminium section weighing 0.55 kg /mtr including necessary joining cleat,glazing clips, rubber packing ,handle two numbers in each door,hinges,anodised aluminium snap beading screwes etc,including powder coating of any colour (min thickness of powder coating n less than 50 micron) complete all as specified and directed by Engr-in-charge. |
| 50 | M & L for fixing ACP (aluminium composite panel )4.5 mm thinckness to aluminium substructure at any height in any colour (as approved by E in Charge) non toxic PE core -3 mm and back coil 0.5mm with minimum 30 +/- 5 mirror PVDF coating on top coil polyster/epoxy coating on back coil (7+-2 micron) fixed on aluminium sub structures complete all as specified and as directed by Engineer-in-charege. |
| 51 | S&F in sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete complete all as specified and as directed by Engineer-in-charege. |
| 52 | M&L 16-18 mm thick Granite (of any type) work (table rubbed and polished) in platforms, urinal partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-charege. |
| 53 | M&L Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed by Engineer-in-charege. |
| 54 | Material and labour for Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, manholes including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed by Engineer in charge. |
| 55 | M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed by Engineer-in-charge.. |
| 56 | M&L for rendering to brick masonry surfaces 15mm thick in cement mortar 1:4, complete all as specified and as directed by Engineer-in-charege. |
| 57 | Excavation in post holes each n.exc 0.50 cum getting out. Returning filling in layers n.exc 25cm etc removal at surplus soil to a distance n.exc 50 mt and making good surface in hard/ dense soil complete all as specified and as directed by Engineer-in-charege. |
| 58 | M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete all as specified and directed by Engineer In charge. |
| 59 | S&F Steel work as in tubular / L post trusses,plates, purlins including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified and as directed by Engineer-in-charege. |
| 60 | M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any complete all as specified and as directed by Engineer-in-charege. |
| 61 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charege. |
| 62 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charege. |
| 63 | Taking up or down steel tubing and connections 15mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-charge. |
| 64 | Taking up or down steel tubing and connections 20mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-charge. |
| 65 | Supplying and laying 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-charege. |
| 66 | Supplying and laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-charege. |
| 67 | S &F 75 mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 complete all as specified and as directed by Engineer-in-charege. |
| 68 | S &F 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floorcomplete all as specified and as directed by Engineer-in-charege. |
| 69 | M&L Complete removal of existing treatment on walls complete all as directed. |
| 70 | M&L Finishing walls on Stone masonry with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed by Engineer-in-charge.. |
| 71 | M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as directed by Engineer-in-charge.. |
| 72 | M&L 3 coats of white wash over a coat of primer on old plastered surfaces on ceilings complete all as specified and as directed by Engineer-in-charge.. |
| 73 | M&L Roughening surfaces of old concrete floor/roof surfaces by picking, sweeping clean and washing down with water to remove dust,etc and Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces complete all as specified and as directed by Engineer-in-charege. |
| 74 | M&L Rendering 15mm thick on fair faces of brick work / concrete surfaces in CM 1:3 finished even and smooth without using extra cement and mixing with WPC as per manufacturers instruction. Note:- WPC will be measured and paid separately. |
| 75 | Supply only liquid water proofing compound to incorporate in above item. |
| 76 | M&L Applying evenly a priming coat of industrial bitumen 85/25 at the rate of 0.3 kg per sq.m including cleaning surfaces complete all as specified and as directed by Engineer-in-charege. |
| 77 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed by Engineer-in-charege. |
| 78 | M&L applying two coats of aluminium paint @ 0.1 ltr/Sqm per each coat complete all as directed, Preparation of new or previously untreated surface complete all as specified and as directed by Engineer-in-charege. |
| 79 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-charege. |
| 80 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charege. |
| 81 | M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-charege. |
| 82 | M&L Cement concrete type D2 1:4:8 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-charege. |
| 83 | M&L for 50mm thick sand cushion in flooring below interlocking tiles complete all as specified and as directed by Engineer-in-charege. |
| 84 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed by Engineer-in-charege. |
| 85 | M & L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engineer-in-charege. |
| 86 | Removing excavated/demolished material exc 250 m n.exc 500m or out of MOD land and depositing where directed at a level n.exc 1.5 km above the starting point. |
| 87 | Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and as directed by Engineer-in-charege. Please Enable Macros to View BoQ information |
| 88 | Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and as directed by Engineer-in-charege. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender