Tender For Renovation Of Control Room Of Receiving Station Sangam By Way Of Construction/ Extension Of Kitchen And Allied Works
Tender Value
5.62 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
14 days left
EMD
11250
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Control Room Of Receiving Station Sangam By Way Of Construction/ Extension Of Kitchen And Allied Works
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing oB3:D30 50 meters lead as per direction of Engineer-in-charge. |
| 2 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width a including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 3 | Supplying, filling, spreading and leveling stone soling hand packed of size range 5cm to 20 cm, in recharge pit in the required thickness for all leads and lifts all complete as per direction of Engineer-in-charge |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing Mild steel and medium tensile steel bars 10mm/12mm. |
| 7 | Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) including curing complete in: Above plinth level and upto floor V level |
| 8 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brickhoney comb shaft with common burnt clay (non modular) bricks of classdesignation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 9 | Providing wood work in frames of doors,fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 2nd class kail wood. |
| 10 | Providing and fixing panelled or panelled and glazed shutters for doors, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood: With shutter thickness 35 mm. |
| 11 | Providing and Fixing of 35mm thick Wire guage Shuttering galvanised for Doors and Windows including Stainless Steel ISI marked Butt Hinges with necessary screws.With 2nd class teak wood beading 62x19 mm |
| 12 | Providing and fixing of RCC in 1:2:4 Mix including curing but excluding cost of Steel and farmwork for , DPC, Lintal Beam and Slab. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work |
| 14 | Providing and fixing of 12mm Cemement Plaster in 1:4 Mix. |
| 15 | Providing and Fixing of 50mm thick Cement concrete Flooring in 1:2:4 Flooring with float Coat of Net Cement. |
| 16 | Providing and applying wall putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick. |
| 17 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content |
| 18 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 2 Two coats |
| 19 | Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete.. 75x50x2.5 mm |
| 20 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :250x10 mm |
| 21 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm |
| 22 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) andjointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 23 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with waste pipe as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 470x420mm bowl depth 178mm |
| 24 | Providing and fixing CP brass Sink mixer of approved make and manufacture, make: Hindware/Jaguar/Cera. 15mm dia nominal bore |
| 25 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittingscomplete: Semi rigid pipe 32 mm dia |
| 26 | Providing and fixing ( gang saw cut mirror polished ( pre-moulded and pre-polished), machine cut for counters of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding (of edges wherever required ) and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any colour and shape 18mm thick. and slab area over 0.50 sq m. (Note: The Granite stone slab shall be cut to required size and laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured) Sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts andcarriages etc. upto site of work complete |
| 27 | Provision for Electric Wiring by way of providing of 3 No of Heating points, four No of Lighting points, one No. 9\\" Exhaust fan and one ceiling fanof reputed Brand using 4mm/1.5 sqmm copper wire including Sqaure flat LED lamps Switches, Sockets as per directions of Site Incharge. |
| 28 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings.along with all accessories including sockets Etc. req. This includes testing of joints complete as per direction of Engineer-in charg, .Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe , 25mm OD(SDR-7.4) |
| 29 | Providing and fixing PPR Unions/reducer /bends/FTE/MTE what ever required for connecting the external water connection over topwater tanky and the internal fitting. |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene 500 Ltr three layer water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 31 | Providing and Fixing of GI Tank Nipples/flanges and unions etc |
| 32 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore |
| 33 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.25mm nominal bore, 152mm long, weighing not less than 440gms. |
| 34 | Providing and Fixing of Water Geyser 35 Ltr of reputed Brand Havels/Venus |
| 35 | Providing , Fixing, testing and commissioning of 1200 mm sweep, BEE 5 Star rated with BLDC Motor Celing Fans all complete of reputed Brand suitable for 230 V, 50 Hz, Single Phase AC Supply |
| 36 | Providing, Fixing, testing and Commissioning of Exhust fan 8 inch 16 Watt of reputed make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender