Tender For maintenance of electrical installation & Fans, repair maintenance Pump Sets, Compound Light, At Delhi Archive Building, Qutab Institutional Area, New Delhi During The Year 2026-27 (Sh- Provision Of Automatic Rolling Shutter I/C Servicing O
Tender Value
5.77 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
6 days left
EMD
11556
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of electrical installation & Fans, repair maintenance Pump Sets, Compound Light, At Delhi Archive Building, Qutab Institutional Area, New Delhi During The Year 2026-27 (Sh- Provision Of Automatic Rolling Shutter I/C Servicing Of Substaiton And Earthing Work).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling & refixing the 11 KV HT CB & draw out the CB trolley from the HT CB panel, thorough cleaning & checking, tightening all metal contacts & studs and replacement of deffective consumable parts etc. complete as required. |
| 2 | Testing, claibration & adjustment of all types like IDMT, Earth Fault etc. HT relay with secondary current injection test kit by applying the current at particular time reqd. for the same & checking the tripping time of the circuit breaker complete as reqd. |
| 3 | Overhauling & servicing of draw out of 2500 /1600A/1250A/1000A LT Air- Circuit breaker comprising of assorted rating switches i/c carbonized flashed contacts cleaning, contracts alignment resetting, contact resistance test, tightening nut, bolt, washer of distorted sockets etc as required. |
| 4 | Servicing , overhauling, testing and commissioning of floor mounted metal LT main panel board after complete overhauling and throughly checking of Busbar chamber, trip free mechanism, eating, short circuit breaking , CT chamber, busbar, DMC, SMC insulation, Ammeter, voltmeter, insulation test, interconnection, tighting of nut bolt washer of panels including servicing and thorogh checking of contact points of all MCCBs, MCBs installed on the panel and refixing the same tec. as required. |
| 5 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 6 | Supplying and fixing of heavy duty fully automatic motorized rolling shutter 1 mm thick GI laths sheet mounted on specially design 5 inched pipe shaft with rolling ball bearing system and heavy duty GI top cover for rolling shutter and side fixing MS Channel and 35x35x5 mm angle iron with lock plate and extra for providing of heavy duty grill made of 8 mm dia MS bar approximately 1 mtr along the entire width of shutter with one or more coat of primer and two or more core of enamel paint i/c credit of old dismantle material as and where basis complete as required |
| 7 | Supply and fixing of heavy duty fully automatic motorized rolling system with side rolling shutter motor with single phase 220 volt 50 Hz lifting height 6 mtr. lifting force capacity 600 kg single phase suitable for all weather conditions precisely open and close strong power and low noise safety break up and down switch shaft, clutch and automatic system with inbuilt manual SS chain pulley system mounted on the GI rolling shutter complete as required |
| 8 | Supplying , Laying and fixing following size of PVC insulated and PVC sheathed al. conductor armoured power cable of 1.1 KV grade of following ways as reqd. (a) 3.5 X 25 sq.mm. cable on surface |
| 9 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender