Tender For Repair And Miscellaneous Works At Residential Quarter J/1/2, Acjm, Nathdwara
Tender Value
6.24 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
6 days left
EMD
12480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajsamand → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Miscellaneous Works At Residential Quarter J/1/2, Acjm, Nathdwara
BOQ
| Sl. No. | Item Description |
| 1 | Anti-termite treatment of existing floor and wall using Imidacloprid30.5% EC non repellent, odorless, low dose, environimentally safeTermiticide with rapid action non corrosive stain free, by injecting theemulsion as per specification and plugging with cement mortar 1:2 ( 1cement : 2 coarse sand) in the whole floor area. The pesticide emulsionof imidacloprid 30.5% EC mixed with water in the ration of 1:474 willbe pumped by a motorized spray pump specified manner. The net floorand wall area treated will be measured for payment. |
| 2 | Painting exterior surface of Wall with 100% acrylic exteriorpaint of approved brand and manufacture to give an evenshade with two or more coats including prepartion of basewith sand papering, primer, putty, etc complete in all respectincluding scaffolding and safety provision Old Work |
| 3 | Wall painting with plastic emulsion paint of approved brandand manufacture to give an even shade including allscaffolding: Old work (One or more coats ) |
| 4 | SS wire gauge 14 mesh x 24 gauge |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator )/manual means over areas (exceeding 30cm in depth. 1.5m in width aswell as 10 sqm on plan) including disposal of excavated earth, leadupto 50m and lift upto 1.5 m , disposed earth to be levelled and neatlydressed:All kinds of soil |
| 6 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excluding thecost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate20mm nominal size). |
| 7 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excluding thecost of centering and shuttering - All work up to plinth level M15 grade Nominal Mix1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate20mm nominal size). |
| 8 | Providing & laying Chequered terrazzo tiles of approved make22mm thick with marble chips of size upto 6mm, in floors, jointedwith neat cement slurry mixed wit pigment to match the shade oftiles including rubbing and polishing complete in all respect as perspecification, on 28mm thick bed of C.M. 1:4 : Light shade using shade cement |
| 9 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5sq. metres and under including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the wallscomplete including disposal of rubbish to the dumping ground within50 m lead : With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 10 | Providing and fixing external grade board solid core singleleaf flush door shutters ISI 2202-67 marked using Phenolformal dehyderesin in glue both sides with approved steelfittings complete as per annexure 'A' : 30 mm thick .Commercial Veneer both side |
| 11 | Providing & Fixing mica of approved make for inner/outerside of shutters with fevicol & nails complete as per approvedby engineer in charge 0.8mm thick mica. |
| 12 | 1.0 mm thick stainless steel AISI -304 & IS 13983-1994kitchen sink of approved make as per Engineer-in-chargewith large waste coupling. 18 x 16 x 6 16x14x6 |
| 13 | Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 5 mm |
| 14 | Renewal of old putty of glass panes (length) |
| 15 | Providing and fixing fully panelled /partly panelleddouble leaf shutters frame for windows and ventilators asper approved design and drawings with approved steelfittings as per Annexure ‘A’ and width of styles, bottomand top rails 75mm including intermediate rails 50mmwide, beading of 25mm x 15mm size on both faces : 35 mm thick8.5.1.1 Nigeria wood grade I |
| 16 | Rough Chisel dressed Sand stone 35 mm thick flooring ofapproved shade set over 20mm thick base of cement mortar 1:6 (1cement : 6 coarse sand) and pointing with cement sand mortar 1:3with pigment to match the shade of stone with joint thickness upto 15 mm complete in all respects). |
| 17 | Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting (height upto10 m) , fixing in position and applying a priming coat of approvedsteel primer all complete: |
| 18 | Providing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, boltsand nuts 8 mm diameter with bitumen and G.I. limpetwashers or with G.I. limpet washers filled with white leadand including a coat of approved steel primer and two coatsof approved paint on overlapping of sheets complete (uptoany pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape whenever required. 0.63 mm thick with zinc coating not less than 275 gm/m2 |
| 19 | ADD 18% GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender