Tender For Urgent Repair To The Floor Above Laundry Area To Prevent Structural Damage To Laundary Wall (Basement Level-I Block-C) In Gmch, Sector-32, Chandigarh
Tender Value
26.98 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
6 days left
EMD
53978
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Urgent Repair To The Floor Above Laundry Area To Prevent Structural Damage To Laundary Wall (Basement Level-I Block-C) In Gmch, Sector-32, Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. DSR 15.2 |
| 2 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) DSR 15.2.1 |
| 3 | Demolishing cement concrete manually/ by mechanical means includingdisposal of material within 50 metres lead as per direction of Engineer -in - charge DSR 15.2 |
| 4 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) DSR 15.2.2 |
| 5 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. DSR 15.25 |
| 6 | Kota stone slab flooring over 20 mm (average) thick base laid over andjointed with grey cement slurry mixed with pigment to match the shade ofthe slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) : DSR 11.26 |
| 7 | 25 mm thick DSR 11.26.1 |
| 8 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.60 |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. DSR 5.22 |
| 10 | Thermo-Mechanically Treated bars of grade Fe-500D or more.DSR 5.22.6 |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR 4.1 |
| 12 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.10 |
| 13 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : DSR 5.1 |
| 14 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.1.2 |
| 15 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters DSR 10.6 |
| 16 | 80x1.25 mm M.S. laths with 1.25 mm thick top cover DSR 10.6.1 |
| 17 | Providing and fixing Rough cheseled Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (N.S. Based on 11.26.1) NS |
| 18 | 25 mm thick NS |
| 19 | Providing and laying water proofing coating having three coats of rain jackets @ 15sqft/Kg over a priming coat of water proofing paint @ 10 sft/ Kg including fiber mesh of size 800 microns with total thickness of 900 to 1000 microns forming high elstic and resilient coating with resistant to UV rays and non toxic in nature with life of minimum 10 years complete in all respect and entire satisfaction of Engineer-In-Charge. NS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender