Tender for Tender for Construction Of A Stall For The Sale Of Cow-Dung-Based Products Within The Municipal Premises In The Hariparvat Zone.
Tender Value
4.21 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
6 days left
EMD
42177
Bank guarantee accepted
Document Fee
472
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of A Stall For The Sale Of Cow-Dung-Based Products Within The Municipal Premises In The Hariparvat Zone.
BOQ
| Sl. No. | Item Description |
| 1 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc, complete. Hot finished welded type tubes |
| 2 | PLAIN GLASS Best Quality, Cut to Size 5mm thick |
| 3 | Providing corrugated G.S. sheet roofing including vertical /curved surface fixed wit polymer coated J or L hooks, bolts and nuts B mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m\\" |
| 4 | Providing and fixing tiled false ceiling of specilled materials of size 595x595 mm in lrue horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanlzed @ '120 grams/ sqtn, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel lo form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, Iight fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using Gl slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm Gl adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Gl Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G lsheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory paintedafter bending |
| 5 | Pro/iding and fxing lSl marked flush door shutters conforming to lS : 2202 (Part l) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.including ISI marked Stainless Steel butt hinges with necessary screws. (A) 35mm Thick. (Excluding cost of Flttings) (Chapter No.9 Si.No.1-9.21.1) |
| 6 | Providlng and laying Polished Granite Jet Black stone flooring in req0ired design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.{Chapter No.14 Si.No.27} |
| 7 | A pre-laminated sheet, often referred to as a prelam sheet, is an engineered myka wood work product where a decorative layer, like laminate or veneer, is pre-attached to a core material like particleboard or MDF. These sheets offer a durable and aesthetically pleasing surface for furniture, interior design, and construction.(None Scheduled) |
| 8 | Supply and fixing ceiling fan etc. all complete. |
| 9 | Supply and fixing of light fitting switch board etc. all complete. |
| 10 | Supply and fixing of concealed light etc. all complete. |
| 11 | Supply and fixing of concealed light etc. all complete. |
| 12 | Providing & Laying wall paper artifical glass foam etc. all complete. |
| 13 | Sub Total (A) |
| 14 | Add / Deduction For Estimate Figure Amount Match |
| 15 | Grand Total Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender