Tender For Essential Civil Works At Residence No. 3, Kalidas Marg, Necessitated By A Change Of Occupant.
Tender Value
12.64 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
4 days left
EMD
1.26 Lakhs
Bank guarantee accepted
Document Fee
860
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Essential Civil Works At Residence No. 3, Kalidas Marg, Necessitated By A Change Of Occupant.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm DSR. 15.23.1, |
| 2 | Providing and laying in Position Cement Concrete of Specified Grade excluding the cost of Centering and shuttering all work up to plinth level 1:5:10 (1 cement, 5 Coarse sand (Zone-lll) 10 graded Stone 40 mm nomical size Derived from natural Sources ) DSR N0-4.1.10, |
| 3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes. DSR No. 18.8.2 |
| 4 | Providing and laying Vitrified floor Size of Tile 600x1200 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved Make, in all colours & shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey Cement Slurry @ 3.3 kg/Sqm including grouting the joint with white cement and matching Pigments etc. Complete. (DSR-11.41A.2.2), |
| 5 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass of approved quality complete with 6 mm thick hard board groung fixed to wooden cleats with C.P. brass screws and washers complete.DSR No. 17.31, |
| 6 | S/F 15mm dia C.P. health faucet with 8mm dia 1.20 Metre meter long flexible tube & wall hook, Jaquar make Code N0-ALD-573, including supply of all material, labour, T&P etc. complete. |
| 7 | S/F of C.P. Brass Single Towel Rack 600 mm with long hungers Jaguar make Code N0-AKP-35781PS, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 8 | S/F of C.P. brass toilet Roll/Papar Holder with Flap Jaguar make Code N0-AKP-35753PS, including supply of all material, labour, T&P etc. complete. |
| 9 | S/F of C.P. brass towel ring Square Jaguar make Code N0-AKP-35721P, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 10 | S/F of C.P. trumbler holder Jaguar Make Code N0-AKP-35741P, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 11 | S/F of Maze Over head Shower Ø300 mm Round Shape Single Flow (Body & Face Plate Stainless Steel) with Rubit Cleaning System Jaguar make, Code No-OHS-1633, with O/H Shower Arm Ø20 mm & 300 mm Round Shape with 90° Bend foe wall Mounted Shower with Flange. (CodeN0-SHA-479L600) of Jaguar make including supply of all material, Labour, T&P etc. requird for proper completion of work. |
| 12 | Supply and fixing of CP hand Shower Ø95 mm round shape single flow (ABS body in chrome Plated with Grey Face Plate) with rubit cleaning sysyem of Jaquar make (Code No- HSH -1737) with Flaxible Tube 8 mm dia & 1.5m long with nuts Code no-SHA-549D8 including supply of all material & Labour and T&P etc complete. |
| 13 | S/F of C.P. brass Soap Dish Holder Jaquar Make Code N0-AQN-7731, including supply of all material, labour, T&P etc. complete. |
| 14 | Supply and Fixing of Glass Shelf 600 mm long Jaquar make Code N0-AKP-35771P, including supply of all material, labour, T&P etc. Complete. |
| 15 | Providing and Fixing of Cypher Plus Vanity Description Length 81 cm, width-47.5 cm height 86.5 cm Frame Size-80x14x70 cm, Code N0-KB0338, Karovit make and Counter Top Basin Size: 705x460x195 mm Jaguar Make Code N0-ALS-WHT-85601, Single Lever Tall Boy with 150mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses Jaguar Make Code N0-FLR-5005NB, Including Supply of all Material and Labour etc. |
| 16 | Providing and fixing Aria Wall Hung WC With UF Seat Cover Hinges, Accessories set. Size-360x580x360 Code N0-ARS-WHT-39951UFSM with Flush Plates Control Plate Alive code- JCP-CHR-852415 Jaquar make, including Cutting and making good the walls and floors wherever required. |
| 17 | Supply and Fixing of C.P. Angular Stop Cock with Wall Flange Jaguar Make. Code N0-FLR-5053N, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 18 | Supply and Fixing of 15mm dia Florentine C.P. brass Two way bib cock with Wall Flange Jaguar Make Code N0-FLR-5041N, including supply of all material, labour, T&P etc. complete. |
| 19 | Providing and Fixing of 15mm dia Florentine C.P. brass Bib Cock, (Straight line model) with wall Flange Jaguar Make Code N0-FLR-5047N, including supply of all material, labour, T&P etc. complete. |
| 20 | Supply and Fixing of Florentine C.P. Brass Wall Mixter 3-in-1, System with Provision for both hand shower and overhead shower Complete with 115 mm long Bend Pipe, Connecting Legs & Flange (without Hand & Overhead Shower), Jaguar Make Code N0-FLR-5281N, including supply of all material, labour T&P etc. complete. |
| 21 | S/F of C.P.CP BRASS SINGLE TOWEL RAIL 600 MM Jaguar Make Code N0-AKP-35711PS, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 22 | Supply and Fixing of CORNER Glass Shelf Jaquar make Code N0-ACN 1173, including supply of all material, labour, T&P etc. Complete. |
| 23 | Supply and Fixing of C.P. Jali 125 mm. |
| 24 | Supply and Fixing of PVC Nahani Trep, |
| 25 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (17.22A) |
| 26 | Supply and fixing of TYSON Double bowl sink 304 grade stainless steel Size: 980 x 480 mm (39\\" x 19\\") Bowl Size: 400 x 400 mm (16\\" x 16\\") and 400 x 400 mm (16\\" x 16\\") Depth: 230 mm (9”) Installation: Over-mount Cat. No. B4723501 - Pearl finish Cera make and C.P. Sink Jali and C.P. Waste Pipe including Supply of all material, labour, T&P etc. for proper completion of work. |
| 27 | Supply and Fixing of Sink Mixer with Regular Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges Jaguar make code ( FLR-5309N) including supply of all material and labour and T&P etc. completion of work. |
| 28 | Providing and fixing 250 mm Mortice Handle with CY Lock Body & 70 mm Brass Pin Cylinder (4 Brass Comp. Key) ABM Finish with necessary screws etc complete. Rate-5840/1.18=4949.15 |
| 29 | Demolishing brick work Manually/by mechanical means including stacking of serviceable meterial and disposal of unseviceable material within 50 mtres lead as per direction of Engneer-in charge in cement Mortar. DSR No. 15.7.4, |
| 30 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. DSR No. 15.3, |
| 31 | Demolishing lime concrete manually/by mechanicalmeans and disposal of material within 50 metres lead as per direction of Engineer-in-charge. DSR No 15.1, |
| 32 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement Mortar 1:4 (1 cement : 4 coarse sand) including Supply of all materials labour T&P etc. required for proper completion of work as per DSR.No-6.4.1, |
| 33 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slabe with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts fasteners etc.). DSR No. 10.28, |
| 34 | Providing wood work in frame of doors, window, clerestory window and other frames, wrought framed and fixed in posotion with hold fast lugs or with dash fasteneres of reqiured dia & lenght (hold fast lugs or dash fastener shall be paid of separately (Second class teak wood, DSR-9.1.1, |
| 35 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). DSR No. 21.18 |
| 36 | Providing and fixing 18\\" Stainless Steel toughened glass door shutter Handle with necessary screws etc. complete. |
| 37 | Providing and fixing toughened glass door shutter machine with necessary screws etc. complete. |
| 38 | Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates, framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR N0-10.2 |
| 39 | Three Tack Three Panels Sliding window with two glazed & One wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R23 series with frame (98mm & above) x(40mm & above)& both glazed and fly screen sadh (30mm & above) X (55mm & above) with zinc aloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m) DSR No. 9.147.A4.2, |
| 40 | Dismantling Old Plaster or Skirting Racking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metars lead. DSR No-15.56 |
| 41 | 12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DSR-13.4.1, |
| 42 | Removing White or colour wash by Scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. DSR-13.88, |
| 43 | Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. (DSR-13.80), |
| 44 | Finishing wall with Premium Acrylic Smooth exterior Paint with Silicone Additives of required Shade Old work. (Two or More Coats applied @1.43 ltr/10 sqm) Over Existing Cement Paint Surface. (DSR-13.112.1), |
| 45 | Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two of more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR.N0-13.62.1), |
| 46 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR No-15.60 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender