Tender For The Shifting Of Electrical Lines/Systems Obstructing The Road Widening Work From The Pakka Pul To Sitapur Road, Undertaken To Improve The Traffic System Of Lucknow City.
Tender Value
7.78 Crore
Estimated cost
Bid Submission
12 Oct 2026
20 days left
EMD
23.36 Lakhs
Bank guarantee accepted
Document Fee
4366
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For The Shifting Of Electrical Lines/Systems Obstructing The Road Widening Work From The Pakka Pul To Sitapur Road, Undertaken To Improve The Traffic System Of Lucknow City.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of following type high conductivity aluminum strand compacted circular conductor XLP (E) armoured 11KV cable neutral earthed system confirming to IS 7098-Part-II(1985) with latest amendment 185 Sqmm 3 core XLPE cable(Rate Analysis of cost data book 2026) |
| 2 | Supply and fixing of 11 KV out door heat shrinkable cable jointing kit 3x185 Sqmm complete with labour T&P etc (Analysis of Lesa Cost Data Book 2026 ) |
| 3 | Supply and fixing of 11 KV stright through heat shrinkable cable jointing kit 3x185 Sqmm complete with labour T&P etc (Analysis of Lesa Cost Data Book 2026 ) |
| 4 | Supply & fixing steel tubular pole 11 Meter long designated 410 SP-55 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. (Analysis of LESA Cost Data book 2026) |
| 5 | Supply/fabrication and Erection of 11 KV Exposer type Double Pole on Steel tubler pole SP-55 11 mtr. long galonished bottom complete with 410 SP-55 11 mtr long ST Pole-2 Nos, 11 kv pin insulator with pin and nut-, top channel 100x50 mm, MS angle 65x65x6mm, danger board with clamp-2 nos, barbed wire, pole fencing, holding MS clamps-12 nos, nut bolts etc icluding painting of pole with aluminium paint over red oxide primer all complete as per UPPCL specification (Shedule - 29)(Analysised on Lesa Cost Data Book/Lesa Estimate ) |
| 6 | Supply fabrication and erection of 33 KV / 11 KV Cable Hoisting with 150 mm dia MS/GI pipe, holding clamp, nut bolt etc as required all complete as per UPPCL norms (Shedule - 33)(Analysised on Lesa Cost Data Book/Lesa Estimate ) |
| 7 | Supply/fabrication and Erection of 11 KV S/S-type Double Pole on Steel tubler pole SP-55 11 mtr. long galonished bottom complete with 410 SP-55 11 mtr long ST Pole-2 Nos, 11 kv pin insulator with pin and nut-, top channel 100x50 mm, MS angle 65x65x6mm, danger board with clamp-2 nos, barbed wire, pole fencing, holding MS clamps-12 nos, nut bolts etc icluding painting of pole with aluminium paint over red oxide primer all complete as per UPPCL specification (Shedule - 32)(Analysised on Lesa Cost Data Book/Lesa Estimate ) |
| 8 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 sq. mm |
| 9 | Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 sq. mm |
| 10 | High Tension 11 KV Grade XLPE, Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc., 70 sq. mm 3 core |
| 11 | Supply and Installation of 100 KVA 11/0.4 KVA Transformer propor complition of work as per direction of E/I (Analysis of Lesa Cost Data Book 2026) |
| 12 | Supplying, installation, testing and commissioning of following capacity (continuous loading) BEE 5 Star 136 DELHI SCHEDULE OF RATES (E&M)-2025 rated (Corresponding Level as per BIS amended upto date of receipt of tender) , 11/0.433 KV step down, 3 Phase, 50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural) copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Core grade MOH or better, suitable for out door/indoor applications with Offload Tap Changer/ On Load Tap Changer (OLTC) ( below 500 KVA offload and above 500 KVA On Load Tap Changer) on HV side having AVR relay and Remote Tap Changer Control (RTCC) for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote and manual operation of OLTC HV side in range of +5% to -15% in steps of 2.5%, having cable end boxes on HV side suitable for 3x300 sq.mm XLPE cable of 11 KV grade, including bus trunking arrangement on LV side including supplying and laying of copper conductor multicore control cable from transformer to HT breaker/panel for safety tripping, complete with all accessories and safety provisions as per relevant IS Code including first filling of filtered dehydrated oil, i/c supplying and grouting of suitable M.S. Channel with all accessories and transformer shall be confirming to IS : 2026 (Part 1 to Part 5), IS : 1180 and as per CPWD specifications complete in all respects etc as required at site. The maximum flux density in any part of the core and yoke at rated voltage and frequency shall be such that the flux density with + 12.5 percent combined voltage and frequency variation from rated voltage and frequency does not exceed 1.9 Tesla. The permissible temperature-rise shall not exceed 35 0C for oil and 40 dg. C up to 200 KVA and 40 0C for oil and 45 0C for above 200 KVA for winding. Inside of tank shall be painted with varnish or liquid resistant paint. For external surfaces one coat of thermo setting powder paint or one coat of epoxy primer followed by two coats of polyurethane base paint shall be used. IS: 1180 (Part 3) shall be referred to for paint thickness for normal to medium corrosive atmosphere. For highly polluted atmosphere and special application external paint work shall be as per direction of Engineer-in-Charge. 250 KVA |
| 13 | Supplying, installation, testing and commissioning of following capacity (continuous loading) BEE 5 Star 136 DELHI SCHEDULE OF RATES (E&M)-2025 rated (Corresponding Level as per BIS amended upto date of receipt of tender) , 11/0.433 KV step down, 3 Phase, 50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural) copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Core grade MOH or better, suitable for out door/indoor applications with Offload Tap Changer/ On Load Tap Changer (OLTC) ( below 500 KVA offload and above 500 KVA On Load Tap Changer) on HV side having AVR relay and Remote Tap Changer Control (RTCC) for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote and manual operation of OLTC HV side in range of +5% to -15% in steps of 2.5%, having cable end boxes on HV side suitable for 3x300 sq.mm XLPE cable of 11 KV grade, including bus trunking arrangement on LV side including supplying and laying of copper conductor multicore control cable from transformer to HT breaker/panel for safety tripping, complete with all accessories and safety provisions as per relevant IS Code including first filling of filtered dehydrated oil, i/c supplying and grouting of suitable M.S. Channel with all accessories and transformer shall be confirming to IS : 2026 (Part 1 to Part 5), IS : 1180 and as per CPWD specifications complete in all respects etc as required at site. The maximum flux density in any part of the core and yoke at rated voltage and frequency shall be such that the flux density with + 12.5 percent combined voltage and frequency variation from rated voltage and frequency does not exceed 1.9 Tesla. The permissible temperature-rise shall not exceed 35 0C for oil and 40 dg. C up to 200 KVA and 40 0C for oil and 45 0C for above 200 KVA for winding. Inside of tank shall be painted with varnish or liquid resistant paint. For external surfaces one coat of thermo setting powder paint or one coat of epoxy primer followed by two coats of polyurethane base paint shall be used. IS: 1180 (Part 3) shall be referred to for paint thickness for normal to medium corrosive atmosphere. For highly polluted atmosphere and special application external paint work shall be as per direction of Engineer-in-Charge. 400 KVA |
| 14 | Supply and Eraction of Pipe Boring earthing Proper complition of work as for direction of E/I (Shedule - 53) (Analysised on Lesa Cost Data Book/Lesa Estimate ) |
| 15 | Construction of Solid B/W Transformer Plinth of size 1.5mx1.5mx1.25m above G.L.The top of the plinth shall be of RCC 15 cm thick with material & labour all complete as per direction of E/Ic. ( Rate Based on PWD schedule civil2019) |
| 16 | Supply & fixing steel tubular pole 9 Metre long designated 410 SP-32 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. |
| 17 | Supply & erection of overhead line with Arial Bunch Conductor LT ABC of size (3X120+1X95+1X16) SQMM approved quality( PCL approves) on poles / service bracket including binding etc. all complete with labour , T&P , cost of material all as per direction of E/Ic. (Rate Analysis of Cost Data Book 2026) |
| 18 | Supply & erection of overhead line with Arial Bunch Conductor LT ABC of size (3X150+1X95+1X16) SQMM approved quality( PCL approves) on poles / service bracket including binding etc. all complete with labour , T&P , cost of material all as per direction of E/Ic. (Rate Analysis of Cost Data Book 2026) |
| 19 | S/F of 3 Phase 10 ways distribution consumer board for Arial Bunch Conductor complite with fixed on pole all complite as per UPPCL specification or as per direction of E/Ic.(Approved Rate) |
| 20 | Supply of 33 kv cable /11 Kv Cable laying material for double circuit such as brick, sand stone slab of size 600x450x50mm complete with exacavation back filling, labour all complete as per direction of E/ic (Shedule - 09) (Analysised on Lesa Cost Data Book/Lesa Estimate) |
| 21 | S/F of suspension clamp for above ABC complite in all respects as per PCL specification |
| 22 | S/F of dead end clamp for above ABC complete in all respects As per PCL specification (Analysis of cost data book 2026) |
| 23 | S/F of Eye hook for suspension clamp for above ABC complite in all respects as per PCL specification.(Approved Rate) |
| 24 | S/F of pearcing connector suitable for above ABC complite in all respects As per PCL specification.(Approved Rate) |
| 25 | Supply & erection of \\"D\\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc for eye hook. complete in all respects including painting with aluminium paint (As Per PWD Sor-623/2018) |
| 26 | S/B of earth rod 20 mm dia 2.5 mt long including GI wire 7/16 SWG to connected earth rod and earth clamp on pole,3 mt long steel conduit to carry earth wire along the pole complite as per approved of E/Ic. |
| 27 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. |
| 28 | laying of 33 kv armoured XLPE cable with HDD Drilling method complete with labour T&P etc all as per direction. |
| 29 | Supply & Fixing of 4 Core LT Fuse Set Box |
| 30 | Supply & Fixing of LT Tailless Unit (300/500A) Massionary type complete set (for 250 KVA Three Circuit & 400 KVA Four Circuit) copper Busbar 1x0.5x0.5 Meter |
| 31 | Fencing of Transformer 18 rmt |
| 32 | Dismantling Charges of pole structure with accessory, Transformer, conductor etc and carriage of receive back material from site to store ESC (Analysised on Lesa Stock issue/Lesa Estimate ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender