Tender For Construction Of Shaurya Café And Gallery At District Headquartaer, Malkangiri
Tender Value
2.96 Crore
Estimated cost
Bid Submission
05 Oct 2026
13 days left
EMD
2.96 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malkangiri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Shaurya Café And Gallery At District Headquartaer, Malkangiri
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning of project site by removing bushes, shrubs, words, rank vegetation, rubbish, garbage, plastic waste, debris, loose earth, stones, and other unwanted materials from the entire project area, including collection, segregation, loading, carriage (CNG), transportation to an approved municipal dumping yard/disposal site, unloading, disposal, dressing and cleaning of the site complete as directed by the Engineer-in-Charge. The rate includes all labour, T&P, machinery, loading, unloading, transportation, fuel, royalty (if applicable), taxes, and all incidental charges complete. |
| 2 | Earth work excvation in foundation in all kinds of soil including moorum, stony earth, and gravel mixed with boulders with all leads and lifts and to the required depth including shoring, shuttering, propping bullahs, pilling dewatering from foundation dressing and leveling bed supplying and working pumps staking the excavated materials away from working area as directed by the E.I.C. etc in all respects with coffer dam if required as per specification including cost of all materials hire and running charges of the machineries T & P etc. required for the work. |
| 3 | Earthwork excavation in slushy/saturated soil with two extra lead over intial lead and one one extra lift over initial lead and lift in foundation trenches/over areas, including removal of mud, dressing the sides, bailing/pumping out water, and disposing of surplus wet earth within a 50m lead and 1.5m lift. etc. complete. |
| 4 | Filling in foundation and plinth with Quarry Rubbish (Crusher Dust) including quarrying, collecting, conveying, supplying and watering including cost, conveyance, royalty & taxes of all materials & cost of all labour, t & p etc. complete. |
| 5 | Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour cess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge. |
| 6 | Cement concrete (1:3:6) using 4 cm size H.G. Metal free from weathered & skin with cost, conveyance, royalty, taxes of all materials & labour etc. including curing, dewatering if required complete in all respect as directed by the Engineer-in-charge. |
| 7 | R.C.C. work of M-20 grade having a minimum compressive strength (in work test) of 200 Kg/cm.sq in 15 cm. Cubes at 28 days with IS 456 and 516 using 12 mm to 20 mm size down graded (20mm Not to exceed 25 %) hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering, laying and compaction with mechanical vibrators, watering and curing for 4 weeks, (Including centering, shuttering) and finishing the exposed surfaces smooth with cost, conveyance, royalties and taxes of all materials and labour with T&P, with all lead lift and delifts required for the work etc. complete in all respect with proper specification for all structural components as mentioned below and as directed by the Engineer-in-charge.a) Column base |
| 8 | \\"Reinforced cement concrete work in M20 / M25 grade with 20mm down broken granite stone chips/aggregates from approved quarry, including hoisting, lifting, layout, pouring, compacting with needle vibrator, smoothly finishing, and curing for a minimum of 14 days, including cost of all materials, taxes, and labor, but excluding the cost of centering, shuttering, and reinforcement steel, complete as per direction of the Engineer-in-Charge:a) RCC column and Beam above slabs |
| 9 | b) RCC column and Beam above slabs |
| 10 | Providing and removing centering and shuttering including strutting, propping, staging, bracing, applying approved shuttering oil, and removal after completion of curing for reinforced cement concrete works at all levels, complete as per drawings, specifications and direction of Engineer-in-Charge.Column Footing |
| 11 | Providing and removing centering and shuttering including strutting, propping, staging, bracing, applying approved shuttering oil, and removal after completion of curing for reinforced cement concrete works at all levels, complete as per drawings, specifications and direction of Engineer-in-Charge.Plinth Beam |
| 12 | Supplying, fitting, and placing uncoated HYSD bar reinforcement as per drawing & Labour for Straightening, cutting, bending Binding, Cranking, Hooking and jointing (if required) HYSD rod (SAIL)and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD steel rods and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. with all lead lift and delift complete in all respect to the specification and as directed by the Engineer-in-charge |
| 13 | Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 23cmx11cmx8cm in Foundation & Plinth having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.Foundation and Plinth |
| 14 | Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 23cmx11cmx8cm in Foundation & Plinth having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.a) Ground Floor |
| 15 | b) 1st Floor |
| 16 | \\"Providing 2.5 cm thick Damp Proof Course (DPC) in Cement Concrete (1:2:4) [1 cement : 2 coarse/screened sand : 4 stone aggregate] using 12 mm size hard black crusher-broken granite stone chips free from weathered skin, dust, organic matter, and foreign materials, including laying to correct lines, levels, and slopes over the plinth wall, compacting thoroughly, smoothly finishing the top surface, and curing for a minimum period of 7 days, including cost, conveyance, carriage, royalties, and all applicable taxes of all materials (cement, sand, aggregates, and water), cost of all skilled and unskilled labor, labor cess, tools, plants (T&P), and sundries required for the execution of the work complete in all respects as per Odisha PWD specifications and as directed by the Engineer-in-Charge. |
| 17 | White washing with best quality approved shell lime on new or old undecorated surfaces of walls and ceilings to give an even, uniform shade, applying three coats after thoroughly brooming, preparing, and cleaning the surface of all dirt, dust, mortar drops, fungus, and foreign matter, including the cost, conveyance, carriage, royalties, and all applicable taxes of all materials (shell lime, organic binders/glue, indigo/blueing agent, and water), cost of all skilled and unskilled labor (including scaffolding/staging for internal walls and ceilings up to a height of 3.8 meters), tools and plants (T&P), labor welfare cess, contractor's profit, and overheads complete in all respects as per Odisha PWD specifications and as directed by the Engineer-in-Charge.\\" |
| 18 | Wall painting two coats with Plastic Emulsion Paint of approved shade and make (such as Asian Paints / Berger / Shalimar or equivalent as approved by the Department) on new or existing plastered surfaces of walls, ceilings, and architectural features, to give a completely uniform and even shade. The execution must include thorough brushing, cleaning the surface free from foreign materials, mortar drops, dust, and grease, sandpapering smooth between intermediate coats, and providing necessary spot putty patching where required. This rate includes the cost, conveyance, carriage, royalties, and all applicable taxes of all materials (plastic emulsion paint, primers, putty, and sundries), cost of all skilled and unskilled labor, cost of scaffolding and staging charges across all heights and floors, tools and plants (T&P), labor welfare cess, and contractor's profit complete in all respects as per Odisha PWD specifications and as directed by the Engineer-in-Charge.\\" |
| 19 | Fixing Kadappa tiles in floor, steps, treads and landing on 25 mm thick of C.M. (1:1) jointed with neat cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete including cost, conveyance of precaste tile with all labour T&P taxes etc. complete as per direction of the E.I.C.a) Ground Floor |
| 20 | b) 1st Floor |
| 21 | c) 2nd Floor |
| 22 | Fixing Vitrified tiles in floor, steps, treads and landing on 25 mm thick of C.M. (1:1) jointed with neat cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete including cost, conveyance of precaste tile with all labour T&P taxes etc. complete as per direction of the E.I.C.a) Ground Floor |
| 23 | b) 1st Floor |
| 24 | c) 2nd Floor |
| 25 | Supplying fitting fixing of Aluminium door with OEL anodized Al.door section of 9202 as vertical member, 9201 as top member & 9200 as bottom & middle member & 6mm. thick plain black glass in top portion with 12mm. thick prelaminated board in bottom portion fixed on door frame by means of tapered clip no. 4680 & the frame the frames to be complet by means of jointing angle No.-1855 including cost of all labour, T&P, hire charges of Drilling machine etc. complete. |
| 26 | 25mm thick piasal wood or local teak wood false pannel shutters with iron fittings and wooden hinged cleats, etc fixed in position including all labour charges, but excluding the cost of fittings.etc. complete as per direction of the E.I.C |
| 27 | Providing fitting and fixing of false ceiling with Aluminium anodised T section No 3215 with 2'-00\\" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminium grid 2'-0\\"x2'-0\\" with 12.5mm. thick Gypsum board suspended from ceiling etc. complete. |
| 28 | Supplying fitting and fixing G.I. Trafford sheet (TATA make) in roof including fixing of ridges etc complete. |
| 29 | Providing 20mm thick cement plaster with cement mortar in mix (1:6) [1 cement : 6 coarse/screened sand] finished smooth to the rough surfaces of masonry brick/stone walls after thoroughly raking out the joints, scraping, and cleaning the surface of all loose mortar, dust, and organic matter. The rate includes the cost, conveyance, carriage, loading, unloading, royalties, and all applicable statutory taxes of all raw materials (cement, screened sand, and water), providing necessary scaffolding, platform staging, tools, plants (T&P), and sundries. It further encompasses continuous wetting of the masonry surface prior to application, mixing, applying, leveling to proper lines, levels, and plumb using wooden floats, strips, and steel trowels, and subsequent curing/watering for a minimum period of 7 days, complete in all respects as per Odisha PWD specifications and as directed by the Engineer-in-Charge. |
| 30 | Providing 16mm thick cement plaster with cement mortar in mix (1:6) [1 cement : 6 screened fine/coarse sand] on the rough faces of brick masonry walls to proper lines, levels, and plumb. The execution must include thoroughly raking out masonry joints to a minimum depth of 15mm, clearing the surface of all loose mortar, dust, efflorescence, and organic matter, and wetting the wall surface prior to application. The rate includes the cost, conveyance, carriage, loading, unloading, storage, royalties, and all applicable statutory taxes of all materials (approved cement, screened sand, and water), providing necessary internal or external scaffolding, platform staging, tools, plants (T&P), and sundries. It further includes applying the mortar, leveling with wooden floats/straight edges, finishing the surface smooth with steel trowels, and continuous watering/curing for a minimum period of 7 days, complete in all respects as per Odisha PWD specifications and as directed by the Engineer-in-Charge. |
| 31 | Designing, fabricating, supplying, transporting, installing, and displaying dummy weapons, tactical equipment, jungle terrain models, camouflage accessories, and interpretive exhibition elements for museum/gallery display, including life-size or scaled replicas, display vitrines, lighting arrangements, protective finishing, graphic labels, artwork, all accessories, labour, tools & plants, transportation, loading, unloading, installation, testing, and commissioning, complete in all respects as per approved design, drawings, and the direction of the Engineer-in-Charge. |
| 32 | Designing, developing, supplying, installing, testing and commissioning Augmented Reality (AR) / Virtual Reality (VR) Experience Zone showcasing Anti-Naxal operations, security force activities, jungle warfare scenarios, rescue operations, surveillance systems, tactical movements, and public awareness content, comprising VR headsets, AR-enabled interactive displays, touch-screen kiosks, high-performance computers/workstations, licensed software, audio-visual systems, motion sensors, content development, graphics, animation, programming, networking, electrical works, installation, testing, commissioning, operator training, warranty, and all accessories |
| 33 | Designing, supplying, fabricating, transporting, installing and commissioning of \\"Shaurya Gallery\\" featuring stories, photographs, citations, medals, achievements and digital interpretation of Odisha Police / BSF and other Security Force bravehearts, including modular exhibition panels, ACP/MDF display systems, acrylic display cases, LED-backlit graphics, high-resolution printed photographs, information panels, digital display screens, QR-code enabled interactive content, lighting fixtures, display pedestals, electrical works, mounting accessories, installation, testing, commissioning, and all allied work complete as per approved Design and specifications. |
| 34 | Designing, supplying, fabricating, transporting, installing, testing, and commissioning of Digital Display System, Eternal Flame Memorial, and Time-line exhibits portraying the history, gallantry, achievements and sacrifices of security personnel, including high-resolution LED/LCD digital display panels, interactive multimedia content, ACP/MDF exhibition panels, UV-printed graphics, acrylic lettering, stainless steel/brass elements, structured with LED flame effect, granite/marble pedestal, decorative lighting, electrical wiring, framework, electrical wiring, control systems, software integration, mounting accessories, installation, testing, commissioning, and all allied works complete as per direction of the E.I.C. |
| 35 | Designing, supplying, fabricating, transporting, installing, commissioning of Library and Knowledge Corner on policing, internal security, and national service, including bookshelves, reading tables, ergonomic chairs, digital catalogue kiosk, interactive touch display, book display racks, storage cabinets, LED lighting, branding and signage, educational graphics, electrical works, networking, installation, testing, commissioning, and all allied accessories complete as per approved drawings and specifications. |
| 36 | Designing, supplying, fabricating, transporting, installing and commissioning of a Visitors' Remembrance Wall for paying tribute to martyrs and brave personnel, comprising granite/engineered stone/ACP panels, stainless steel and acrylic lettering, engraved or UV-printed panels, LED-backlit display, digital tribute screen, visitor response interface (digital or physical), decorative lighting, structural support framework, electrical works, mounting accessories, installation, testing, commissioning, and all allied works complete in accordance with the approved design, drawings and technical specifications. |
| 37 | Designing, supplying, fabricating, transporting, installing and commissioning of a Souvenir Corner with themed merchandise promoting the spirit of Shaurya, comprising modular display racks; retail counters; lockable display cabinets; acrylic showcases; wall-mounted display units; merchandise shelving; point-of-sale counter; thematic branding; LED lighting, signage, storage cabinets; electrical works, installation, testing, commissioning, and all allied accessories complete in accordance with the approved drawings and technical specifications. |
| 38 | Designing, supplying, fabricating, transporting, installing and commissioning of a Donation Desk supporting approved welfare initiatives for martyrs' families and security personnel, comprising a modular donation counter. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender