Tender For Construction, Repair And Renovation /Upgradation Of Existing Washroom Facilities At Ggm Science College Jammu.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Oct 2026
14 days left
EMD
1.46 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction, Repair And Renovation /Upgradation Of Existing Washroom Facilities At Ggm Science College Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Engaging Labour for dismantling of floor and wall tiles of washrooms |
| 2 | Demolishing Cement Concrete manually/by mechanical means including disposal of material with 50 meters lead as per direction of Engineer-in-charge 1:3:6 or richer mix (i/c equivalent design mix):- |
| 3 | Earth work in excavation by manual means in Trenche's for foundation drains pipes cables etc (not exceeding 1-5 m in width ) and for shafts, wells,cesspits and the like not exceeding 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out excavated earth and disposal of surplus excavated earths as directed (all kinds of soil) |
| 4 | Providing and laying in position cement concrete of specifical grade including curing but excluding the cost of centring and shuttering.All work upto width level with 1:4:8 (1 cement 4 Coarse sand 8 graded stone aggregrate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the costy of centring and shuttering .All work upto plinth level with 1:3:6(1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size) |
| 6 | Brick work with common burnt clay(non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6(1 cement 6 coarse sand). |
| 7 | Extra for brick work with common nurnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level:- |
| 8 | 12 mm Cement plaster of mix 1:4 (1 cement 4 fine sand) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landing balconies, shelves, chajhas, lintels, bends, plain window sills stair cases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with 1 : 1½ : 3 (1 cement : 1½ coarse sand : 3 graded stone aggregrate 20 mm nominal size) |
| 10 | Steel reinforcement for RCC work including straightening, cutting, bending, placing in position & binding all complete above plinth level (Thermo mechanically treated bars of grade Fe 500 D or more) |
| 11 | Centering and Shuttering including strutting Propping etc and removal of form for |
| 12 | Foundations, footings, bases of columns etc. for mass concrete. |
| 13 | Suspended floor roofs landing balconies and acess plat form |
| 14 | Edges of slab |
| 15 | 6 mm cement plaster of ceiling of mix 1:3 (1 cement 3 fine sand) |
| 16 | Providing wood work in frames of doors,windows,clerestory window and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastners shall be laid separetely soil) Sal Wood |
| 17 | Providing and fixing Panelled or Panelled and glazed shutters for doors windows & cleretozy windows fixing with butt hingh of required size with necessary screws excluding panelling which will be paid separetely all complete per direction of Engineer-in-charge.(2nd Class Deodar Wood) |
| 18 | Making Soak Pit 2.5 m diameter 3.0 meter deep with 45x45 cementry brick honey comb shaft with common burnt clay non-modular bricks of class designation 7.5 brick and s.w drain pipe loom diameter 1.0 m long complete as per standard design |
| 19 | Providing and laying vitrified floor tiles in different size Thickness to be specified by the manufacturer with absorption less than 0.08% and conforming to IS 15622 of approved make in all colours and shades laid for 20 mm thick cement mortar 1:4 (1 cement 4 corse sand including grouting the joints with white cement and matching pigments etc complete (size tile 600 x 600 mm) (Make: Kajaria/ Somani/RAK) |
| 20 | Kota stone slab flooring 25 mm Thick over 20 mm (average)Thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and curing complete with base of cement mortar 1:4 (1 cement 4 coarse sand) |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS 15622 Thickness to be specified by the manufacturer of approved make in all colours shades except burgendy bottle green black of any size as apporved by Engineer-in-charge in skirting risers of steps and daclos over 12 mm Thick bed of cement mortar 1:3(1 cement 3 coarse sand and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (Make: Kajaria/ Somani/RAK) |
| 22 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 23 | Providing and fixing of Frosted toughtened glass for washroom (8-10 mm thick) |
| 24 | Providing fixing or laying on wall face or floor un-plasticiged Rigid PVC rain water/WW/SW pipes conforming to IS 13592 Type A including Jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion single socketed pipes Make :Astral/Prince/Supreme |
| 25 | a) 50 mm dia |
| 26 | b) 75 mm dia |
| 27 | c) 110 mm dia |
| 28 | Providing and fixing on wall face/floor unplasticized PVC moulded fitting/accessories for un plasticized Rigid PVC rain water /WW/sw pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion Make Prince/Supreme /Astral |
| 29 | A) Reducer 110x75 mm |
| 30 | B)Single fee with door110x110x110mm |
| 31 | C) Y Tee 110x110 mm |
| 32 | D) Bend 87'5' 110 mm bed |
| 33 | E)Floor Trap 110 x75 mm |
| 34 | F) Half bend 45°110 mm |
| 35 | G) Half bend 45°75 mm |
| 36 | H) multi Trap 110 x75 mm |
| 37 | I) door bend 110x110mm |
| 38 | Providing and Fixing chlorinated Polyvinyl Chloride (CPVC) Pipes having Thermal Stability for hot and cold water supply including all CPVC Plain and brass threaded fittings this includes jointing of pipe sand fitting with one step CPVC solvent cement and Testing of Joints complete as per direction of Engineer -in -charge internal work concealed fixing the pipe with clamps at 1.00 metre spacing including cutting chases & making good the wall etc 20 mm nominal dia. |
| 39 | Providing and Fixing 15 mm nominal bore of strandard back type C.P brass close hole basin mixer pillar Tap of Approved quality and make weigh not less than 1.970 kg (Make Jaquar/Cera/ Hindware) |
| 40 | Providing and Fixing CP health feucet with 1.0 meter SS hose & Wook including fittin g complete job (Make: Jaquar/Cera/ Hindware) |
| 41 | Providing and fixing CP waste Coupling full thread 32 mm Make: Jaquar/Cera/ Hindware) |
| 42 | Providing and fixing 600 x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board groung fixed to wooden sheets with CP brass screws and washers complete |
| 43 | Providing & Fixing glass liquid soap conatainer with snap fitting of approved quality and colour (Make: Jaquar/ Cera/ Hindware) |
| 44 | Providing and Fixing of European Type WC Pan with seat and lid (Hitech) |
| 45 | Providing and fixing of marble cabinet |
| 46 | Providing and fixing PVC wask pipe for sink or wash basin including PVC waste fitting complete semi rigid pipe 40 dia |
| 47 | Providing and fixing water closet squatting pan (Indian Type WC Pan with 100mm sand cost iron pors Trap 10 Ltr Low Level white PVC flushing cistern including flush pipe(of approved make)with manually controlled device(handles Lover)conforming to IS 7231 with all fitting and fixtures complete including cutting and making good the walls and floors where ever required white vitreous china orissa pattern WC Pan of size 580x440 mm with integral Type foot rest (Make : Jaquar/Cera/Hindware) |
| 48 | Providing and fixing white vetreous china pedestral type water closet European type we Pan with seat and lid 10 ltr low level white PVC flushing cistern including flush Pipe with manually controlled device(handle level) conforming to IS 7231 with all fittings and fictures complete including cutting and making good the walls and floor wherever required we can marked white solid plastic seat lid(Make: Jaquar/Cera/Hindware) |
| 49 | Providing and fixing white vitreous china flat back or wall corner Type lipped front urinal basin of 430x260x350 and 340x410x26 mm size respectively |
| 50 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps(Make: Jaquar/Cera /Hindware) |
| 51 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings(Jaquar/Cera/Hindware) |
| 52 | Supplying and Fixing of following CP fitting (Jaquar/Cera/Hindware) |
| 53 | A) Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 54 | B) C.P bib cock |
| 55 | C) CP Angle valve |
| 56 | PVC connection 45 cm length |
| 57 | Waste Coupling |
| 58 | Waste Pipe |
| 59 | Providing and fixing PTMT soap dish holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms |
| 60 | Providing and applying white cement based putty of special thickness of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete 2mm thick |
| 61 | Finishing with deluxe multi surface Paint System for interiors and exteriors using Primer as per manufacturers Specification two or more coats applied @1.25 Liter/10sqm over and including one coat of special Primar applied @0.75 Litre /10 sqm |
| 62 | Applying Priming coat with ready mixed Pink or grey Primer of approved brand and manufacture on wood work (hard and Softwood). |
| 63 | Painting with Synthetic enamel Paint of appoved brand and manufacture to give an even shade. Two or more coats on new work |
| 64 | Providing and fixing gary saw cut mirror Polished,Premount clay and Prepolished machine cut for kitchen flat forms Vanity counter window sills,facing and similar location of required size approved shade colour and Texture laid over 20 mm Thick base cement mortar 1:4 (1 cement & coarse sand ) Joints treated with white cement mixed with matching pigment epoxy touch UPS including rashing curing moulding and polishing to edges to give high glase finish etc complete Job |
| 65 | Providing and fixing of steel urinal:- Heavy Duty |
| 66 | Providing and Fixing of steel water closet squatting Pan India Type:- Heavy Duty |
| 67 | Providing and Fixing of Steel wash basin:- Heavy Duty |
| 68 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. SSR |
| 69 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below |
| 70 | Engaging Carpenter for Repair of Doors. |
| 71 | Carpenter 1st class |
| 72 | Carpenter 2nd class |
| 73 | Engaging Labour for shifting of material from washroom to suitable site |
| 74 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 75 | Carriage of materials by Mechancial Transport incl. loading, unloading and stacking complete (average 10 km lead) |
| 76 | Stone aggregate |
| 77 | Bricks |
| 78 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Wire Make: Anchor/Havells/Vguard/Polycab /Finolex. MMS Conduit Make: AKG/Anchor/Finolex/Polypack |
| 79 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Medium Class PVC conduit as required. (MMS Conduit) Wire Make: Anchor/Havells/ Vguard / Polycab(MMS Conduit Make: AKG/Anchor / Polypack/Finolex |
| 80 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 81 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 82 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 83 | Supplying & laying of PVC insulated and PVC sheathed/ XLPE Aluminium power cable of 1.1 KV grade of following size on surfaces/ direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (Armoured cable) a) 25 sq. mm 4 core |
| 84 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make: Havells/ABB/ Legrand/Anchor/ vguard/ L&T/Schneider) |
| 85 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.(Make:Havells/ABB/Legrand/Anchor/Schneider/ Vguard) |
| 86 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.(Make:Havells/ABB/Legrand/Anchor/Schneider/Vguard) |
| 87 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) (Make: Havells/ ABB/ Siemens /Panasonic /Vguard/ Anchor)8 way (4+24), Double door |
| 88 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make: VGuard/ Havells/ABB/Anchor/ Schneider/ Siemens)Single pole upto 32 amp. |
| 89 | Supplying and fixing of following rating 240/415 volts \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing and commissioning etc. as required. (Make: VGuard/ Havells/ABB/Anchor/ Schneider/ Siemens)a) FPN 63 Amp |
| 90 | Supplying and fixing of following sizes exhaust fan with PVC blade & Louvers complete set on existing holes on wall with necessary connection from ceiling rose to fan using 2 core flexible copper wire.(Make: Havells/Pansonic/ Crompton/wipro/ Bajaj)300mm/12\\" sweep exhust fan |
| 91 | Supply and fixing of single phase of following rating self priming for pumping water including connections etc as required. (Copper winding)1 HP Make: Crompton / Usha / Havells |
| 92 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. (ISI) |
| 93 | Providing and fixing of LED Lamp/Bulb. Make:Philips/Havells/Panasonic9 W |
| 94 | LED Down lighter (COB Type) (System lumenefficacy ≥105 < 120 lm/Watt ). Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) COB Type of following body material and construction as per IS : 10322 withdriver as per the requirement with Driver efficiency>85%, Operating voltage AC 140-270Volt,frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector. Make:Crompton/Havells/Panasonic/Jaquar/PHILLIPS.18/20 watt |
| 95 | LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KVwith Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast/Extruded aluminium Body(Thickness >1.20 mm)Make:Crompton/Havells/Panasonic/Jaquar/PHILLIPS.36 Watt |
| 96 | Supplying and fixing of following sizes of mediumclass PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit asrequired. Make: AKG/Anchor / Polypack/Finolex25 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender