Tender For Up-Gradation Of Sports Stadium /Indoor Stadium At Boys Hostel Bemina Srinagar Alongwith Allied Works
Tender Value
80.10 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
14 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Up-Gradation Of Sports Stadium /Indoor Stadium At Boys Hostel Bemina Srinagar Alongwith Allied Works
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 meters lead. |
| 2 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 3 | Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge. With resin bonded fiber glass wool with density 24 kg/cum |
| 4 | Providing and fixing ACP 3mm multi coloured ( Fire retardant) in partitions, ceilings, shutters frames etc including cost of rubber, neoprene gasket,taping, waterproof silicon sealent ,or as required at site as per the directions of concerned engineer in charge including scafolding upto height 30ft height in 600x600mm panels |
| 5 | Providing and fixing double scaffolding system ( cup lock type ) on the exterior side of building/ structure, upto 25 mtrs height above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 mtr.c/c, horizontal and vertical tubes joint with cup and lock system with M.s tube, M.S tubes Challis M.S clamps and stairs case system in the scaffolding for working platform etc. and maintaining it in a serviceable condition of execution of work of cleaning and/ or pointing and/or applying chemical and removing it their after the scaffolding system shall be stiffened with bracings, runners connecting with the building etc. where ever required. if feasible, for inspection of work at required location with essential safety features for the work men etc, complete as per directions and approval of Engineer-in-charge. Note: - 1) The elevational area of the scaffolding shall be measured for the payment purpose. 2) The payment will be made once only for execution all items of such works. |
| 6 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Imported KD Wood 30mm Thick |
| 7 | Providing and fixing 30mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Imported KD Wood |
| 8 | Providing / fixing of hardware fixtures of approved make including necessary screws etc. |
| 9 | T-bolts 6\\" aluminium |
| 10 | T-bolts 4\\" aluminium |
| 11 | Hinges 4\\" stainless steel |
| 12 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 13 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 14 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter |
| 15 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 17 | Engagement of carpenter and labor for easing of Doors and windows and minor repairs whereever required including cleaning/removing of old glass panes, disposal of unserviceable material as directed by the Engineer incharge. |
| 18 | Carpenter |
| 19 | Labour |
| 20 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 21 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 22 | Providing and fixing precoated galvanised steel sheet roofingaccessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 23 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 24 | Cricket Pitch |
| 25 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil. 25 meter beyond 1 m from cutting edge |
| 26 | Consolidation of pitch base to required gradient and X section using power Road Roller 8-10 tonne capacity to achieve the required density complete job; all inclusive |
| 27 | Providing & laying of stone soling hand packed in foundation and plinth including ramming, watering, compaction & lead lifts all carriages upto site of work complete job; All inclusive. |
| 28 | Supply, laying of coarse sand including sieving of sand properly to remove any foreign substance and laying in layers not exceeding 50mm in depth and surface to be flooded with water including carriage of sand from near source. Complete job all inclusive. |
| 29 | Supply, laying of sandy loom (moisture of fine sand and fine clay) in ratio 1:10 to be laid in layers not exceeding 50mm in depth and consolidation with power Road Roller 1/2 tonne capacity or plate vibrator to achieve the required density complete job; all inclusive |
| 30 | Supply, laying of top layer of earth having highest clay content available to be laid in layers not exceeding 50mm in depth and consolidation with power Road Roller 1/2 tonne capacity or plate vibrator to achieve the required density complete job; all inclusive |
| 31 | Providing and fixing 15x15feet cricket canvas sight screen and is movable foldable with stable MS section frame with channel base with 4 special turf tyres allowing easy movement with color black on one side of sight screen and white color on other side compete job all inclusive |
| 32 | Supply of dugout structure fabricated from MS tube having minimum dimension of 50 x 50mm Square Tube detachable frame work with powder coated matt finish. The height of the dugout will be 2.05 meter at front side, Curved surface roof and 4.9 mtr length The seating capacity will be of 10 players. The structure will be covered with 3mm thick transparent or colored polycarbonate sheet on top and two sides-Wheel Assembly - Solid tyre 10\\" wheel attached to dugout for easy movement without any damage to the sports field. The Structure is Provided with HDPE Blow Molded Seat Double-wall hollow blow mold bucket type seat having minimum dimensions as 465 mm side length x 4.40 mm front width x 390 mm rear height in one piece of HDPE having minimum shell thickness of 2 mm on each wall. Minimum seat density of 0.95 gram/cm3, weight of plastic chair should not be less than 1.9-2.1 kg. Chair should withstand in high temperature not less than 50•C with ultraviolet stabilizer and color fastness, having ergonomic design, the chair should be fixed with Metal Inserts moulded inside seat to connect seat with sheet metal bracket which is mounted on 40x2mm Square tube-Chair has a warranty of 2years against significant color fading and 5 Years against breakage due to manufacturing. chair plastic part tested with xenon-Arceposure Test as per ISO 48892-2:2013. Cycle-1.The seat pass BSEN 12520; 2015 Test |
| 33 | Supply and spreading of local earth at site including carriage complete job; all inclusive |
| 34 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 35 | Engagement of JCB for levelling of surfaces including fuel charges compelte job;, all inclusive |
| 36 | Net Practice Cricket Pitch (2No Pitchs) |
| 37 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil. 25 meter beyond 1 m from cutting edge |
| 38 | Providing & laying of stone soling hand packed in foundation and plinth including ramming, watering, compaction & lead lifts all carriages upto site of work complete job; All inclusive. |
| 39 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 40 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 41 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 42 | Providing and fixing of MS Pipes 65mm dia including applying one coat read oxide primer and two coats synthetic enamel paint of approved brand and manufacture including fixing of bottom MS Plate 12\\" x12\\" of 6mm thick including hooks etc all necessary fixtures complete job; all inclusive. |
| 43 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. |
| 44 | Providing and fixing of sysnthetic polythene twin thickness knotted net 3mm gauge and 50x50mm mesh complete job all inclusive |
| 45 | Carriage of materials by way of mechanical transport including loading unloading leads lifts from source to site of work complete job. |
| 46 | Sand and Aggregates for an average lead of 20Kms |
| 47 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required as per IS Standard. Group C |
| 48 | Supplying and fixing suitable size GI /PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Anti Bacterial and Anti Fungal) |
| 49 | Supplying and fixing suitable size GI /PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). (Anti Bacterial and Anti Fungal) |
| 50 | Supplying and fixing suitable size GI/PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. as per IS standard (Anti Bacterial and Anti Fungal) |
| 51 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required as per IS Standard. |
| 52 | 2 X 1.5 sq.mm+1 X 1.5 sq. mm earth wire. |
| 53 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. |
| 54 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 55 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 56 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 57 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 58 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 8 way (4 + 24), Double door |
| 59 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 60 | Single pole |
| 61 | single pole & Neutral |
| 62 | 32A (DP) |
| 63 | LED Down lighter (SMD Type) (System lumen efficacy ?120 lm/Watt ), Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.?0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. \\"complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ?120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminum Body including trim .22 watt |
| 64 | Supplying Installation, Testing and Commissioning of LED RGB/RGBWW/ RGBNW/ RGBA/RGBW suitable for interior use having IP65 rating (as per site requirement). Flexible light strip of 5 mtr standard length with 12-15 Watt per meter. Luminaire shall be capable of producing dynamic colour changing light for with 16 million colours by DMX/Ethernet based control. Minimum System lumens 450 lumens/meter and System Lumen Efficacy > 30lm/w. Luminaire light beam spread - 100-110°, The Strip should have IP 65 protection and is offered IP 65 rated connectors to join the LED Strips in continuity. The luminaire must be offered with Aluminium channel for mounting the strip lights. The product should be complete with all accessories and Driver. Lifetime of complete luminaire (LED, Driver, Electrical & control circuitry) shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) with dully R Number marked. Luminaire shall be complete with replaceable driver and capable of operating at line voltage without any separate power supply from 24 V DC, Fixture shall be suitable to operate at an ambient temperature range of -10°C to +50°C. |
| 65 | Supplying, | installation, Testing & Commissioning of. 45 watt Panel light 2x2 ft. (Philips/Wipro/Crompton /Bajaj /Surya/ Panasonic/Halonix )’ of Powder coated die cast/Extruded aluminum Body, material and construction as per IS: 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, freq. 50/60 hz, Operating temp range 15 deg to. 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD <.10%, P. F.>0.95, 1P20, cri >80, UGR (Unified Glare Rating) <19, Flicker free (Flicker should be below 5 %), life time (LED, Driver & electrical| circuitry), of minimum 50000 Burning Hours with; 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM 21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K / 6500°K (As per ANSI Bin) SDCM(standard Deviation Color Matching) < 3 Maximum power consumption should not more than the Specified rating and fixture shall be of relevant BIS standard and trade nark certificate (T.C) Complete in all respects including connections with 1.5sqmm FRLS, PVC insulated copper conductor single core cable and earthing etc as required system lumen efficacy >105 <120lm/watt out put (Thermal Management; heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C (thickness >1.20 |
| 66 | Supplying/Installation/Testing and commissioning of 24 Wt 4 feet long LED batten 6000/6500k Light. (Phlips/Wipro /Croripton/ Bajaj /surya/: Panasonic /Halonix ) having extruded aluminum heat sink with anti-glare diffuser with energy efficient electronic driver CRI greater than 80 with minimum system Lumens 4000 and including connection with multi strand copper conductor 3-core cable etc as required at site with burning hours greater than 50000 Hours having system Limens 110 LM/watt |
| 67 | Supply, Installation, Testing, Commissioning of 4MP IP Fixed bullet Camera (STQC Certified Only) |
| 68 | Supply, installation, Testing, Commissioning 4 Port Layer 2 Network POE Switch |
| 69 | Supply, Installation, Testing and commissioning of 4 Channel, NVR |
| 70 | Supply, Installation, Testing, Commissioning of fully loaded 2U Rack |
| 71 | HDMI Cable |
| 72 | Supply, Installation, Testing and commissioning of 2 TB HDD for NVR |
| 73 | Supply, installation, Testing Commissioning of Cat 6A Cable 23 AWG Solid Copper Conductor in conduit |
| 74 | Supplying, installation, Testing and Commissioning of 8ftx6ft digital Multi sport Score board with name of the stadium with data communication via blue tooth (8-10 mts,RF for up to 80 meter including RF amplifier . The design /specifications are to be approved by the incharge Engineer |
| 75 | 7.0 Mtr Long GI (65 micron DFT single dip) Octogonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 135 mix 70mm & base plate of 225 x 225 x12mm/pcd 250 mm provided with proper door opened gear box for connections on the bottom side with G.I. Foundation Bolts J Type) M25x750 mm long (Set of 4 no.'s per pole) |
| 76 | Laying of RCC foundation for 7.0. mtr. Long Octagonal poles, including proper curing 0.55mX0.55mX0.8m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos., of 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200mm C.C for fixing the pole). |
| 77 | Earthing of Octagonal Pole Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender