Tender For Providing Of Workstations, Civil Works, Interior Finishes And Other Allied Works In Finance Wing At Smvdu, Kakryal, Katra
Tender Value
17.71 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
13 days left
EMD
35426
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Of Workstations, Civil Works, Interior Finishes And Other Allied Works In Finance Wing At Smvdu, Kakryal, Katra
BOQ
| Sl. No. | Item Description |
| 1 | Modular Furniture and Civil Works |
| 2 | Partition Size (W)2400mm X (H) 1500mm - 01 No.Partition Size (W)1800mm X (H) 1500mm - 02 Nos.Partition Size (W)1500mm X (H) 1500mm - 01 No.Partition Size (W)600mm X (H) 1500mm - 01 No.Supplying & Placing low height partition in completely knock down conditions that is to be assembled at site. Aluminium panel based partition system of 60mm thick and 1500mm height. Upper part of the panels to be provided with 4mm transparent glass & Lower part of the Panel should be finished with approved plywood conforming to IS-710 with appoved laminate. Framework shall be made of aluminum alloy extrusions. All Aluminum parts shall be pretreated and duly powder coated of 40µ-50µ thick. All these frame work sections shall be fitted to each other by fasteners of 2mm thickness which is properly zinc coated for corrosion resistant. Raceway shall be provided of aluminum below the work top as per requirement for inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with curve trims. The trims shall be made of aluminum extrusions with 1.5mm thick and should be covered with Die Cast End caps on joints, 2 ways, 3 ways & 4 ways caps as required. Wire management partition shall have concealed wire management capabilities and shall be engineered for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Dimensions Tolerance ±20 mm. |
| 3 | Supplying & Placing Modular table in completely knock down conditions with an overall size 1800mm X 1650mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall have the size 1800mm X 750mm made up of 25mm thick Ply conforming to IS : 710 with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and edges shall be sealed with 1mm thick same laminate . Single sided flip-up/pop-up box shall be enclosed at table top that houses video, audio, LAN and data and power connection discretely. A pullout keyboard trey shall be provided of 18mm thick Ply conforming to IS: 710 with approved laminate. The trey shall be operated on keyboard channel. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 25mm thick Ply conforming to IS: 710 and profile shall be in linear shape and exposed edge with appropriate laminate edge bending. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick Ply conforming to IS: 710 laminate finish with appropriate laminate edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. The table shall have side unit for storage purpose with an overall size 900mm X 450mm X 750mm. The side unit shall be made up of ply IS :710 grade with laminate finish with top 25mm thick and other parts 18mm thick like shutter, back, side panel etc. It shall have 2 sliding shutter which slides over sliding rail track. The shutter shall be operated with SS handle and Multi-purpose (MP) locking mechanism. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Ply conforming to IS: 710 with laminate finish. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. Dimensions Tolerance ±20 mm. |
| 4 | Supplying and placing ergonomically designed, comfortable & aesthetically appealing High back chair. The seat shall be made of 15mm thick hot pressed curved plywood upholstered with high resilience polyurethane foam 50mm thick having density 40kg/m³ with khaki leatherite tapestry 0.8mm thick and 535 GSM and the back shall be supported by metal insert MS CRCA frame upholstered with high resilience polyurethane foam 12mm thick having density 23kg/m³ with khaki leatherite tapestry 0.8mm thick and 535 GSM with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. Headrest shall be provided for comfort of head with leatherite tapestry. The armrest shall be used MS CRCA chrome plated with PU arm completely joint with seat and back. The chair shall have swivel tilt 360 degree revolving mechanism with four position locking and Swivel Tilt adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be made up of MS CRCA chrome plated having pitch circle Dia 640 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. The Seat size shall be 485±10 mm(W)X520±10 mm(D) and back size shall be 740±10 mm(H) from seat, overall height = 1150±10 mm and overall depth/width= 740±10mm. (Revolving Chair) |
| 5 | Providing and supplying a visitor chair with ergonomic design for user comfort & shall have aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood and the back shall be supplied with metal pipe, inserted between backrest. The chair shall be padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 12mm thick having density 23Kg/m³ in back. The seat and back shall be upholstered with leatherite tapestry 0.8±0.1mm thick, 535 GSM and breathable mesh tapestry behind the backrest. MS chrome plated pipe frame shall be provided on both side of seat and back with size 25mm X 10mm. The backrest shall be supplied by keeping the natural curvature of the spine which helps to provide back support. The armrest shall be used black integral polyurethane arm mounted on CRCA chrome plated pipe having size 40mm X 10mm completely joint with seat and back with the assistance of Allen key screw. Chrome plated round bend pipe of dia. 9mm shall be provided behind the backrest of the chair and welded with main frame. The frame structure shall be cantilever support type made of MS CRCA chrome plated round pipe of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 500±10 mm(W) X 510±10 mm(D) and back size shall be 450±10 mm(W) X 540±10 mm(H) from seat & overall height = 980±10 mm, overall width = 560±10 mm. (Fixed Chair) |
| 6 | Supplying & Placing Modular table in completely knock down conditions with an overall size 1500mm X 1650mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall have the size 1500mm X 750mm made up of 25mm thick Ply conforming to IS: 710 with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and edges shall be sealed with 1mm thick edge banding. Single sided flip-up/pop-up box shall be enclosed at table top that houses video, audio, LAN and data and power connection discretely. A pullout keyboard trey shall be provided of 18mm thick Ply conforming to IS: 710 grade with laminate. The trey shall be operated on keyboard channel. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 25mm thick Ply conforming to IS: 710 grade and profile shall be in linear shape and exposed edge with appropriate laminate edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick Ply conforming to IS: 710 grade laminate finish with appropriate laminate edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. The table shall have side unit for storage purpose with an overall size 900mm X 450mm X 750mm. The side unit shall be made up of Ply conforming to IS: 710 grade laminate finish with top 25mm thick and other parts 18mm thick like shutter, back, side panel etc. It shall have 2 sliding shutter which slides over sliding rail track. The shutter shall be operated with SS handle and Multi-purpose (MP) locking mechanism. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Ply with laminate IS 710 grade with laminate finish. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. Dimensions Tolerance ±20 mm. (Table with Side Unit) |
| 7 | Providing and supplying a medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood and the back shall be supplied with inserted pipe frame. The chair shall be padded with high resilience polyurethane foam 50mm thick having density 40Kg/m³ in seat and 12mm thick having density 23Kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM and breathable mesh tapestry behind the backrest. MS chrome plated pipe frame shall be provided on both side of seat and back with size 25mm X 10mm. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support. The armrest shall be used black integral polyurethane arm mounted on CRCA chrome plated pipe having size 40mm X 10mm completely joint with seat and back with the assistance of Allen key screw. A chrome plated round bend pipe of dia. 9mm shall be provided behind the backrest of the chair and welded with main frame. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and Swivel Tilt adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal shall have five legged CRCA chrome plated having pitch circle dia. 650mm fitted with 5 nos. twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled, confirming to ANSI/BIFMA Standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The Seat size shall be 490±10 mm(W) X 520±10 mm(D) and back size shall be 450±10 mm(W) X 535±10 mm(H) from seat & overall height = 980±10 mm, overall width = 560±10 mm & overall depth = 670±10 mm. (Revolving Chair) |
| 8 | Providing and supplying a visitor chair with ergonomic design for user comfort & shall have aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood and the back shall be supplied with metal pipe, inserted between backrest. The chair shall be padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 12mm thick having density 23Kg/m³ in back. The seat and back shall be upholstered with leatherite tapestry 0.8±0.1mm thick, 535 GSM and breathable mesh tapestry behind the backrest. MS chrome plated pipe frame shall be provided on both side of seat and back with size 25mm X 10mm. The backrest shall be supplied by keeping the natural curvature of the spine which helps to provide back support. The armrest shall be used black integral polyurethane arm mounted on CRCA chrome plated pipe having size 40mm X 10mm completely joint with seat and back with the assistance of Allen key screw. Chrome plated round bend pipe of dia. 9mm shall be provided behind the backrest of the chair and welded with main frame. The frame structure shall be cantilever support type made of MS CRCA chrome plated round pipe of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 500±10 mm(W) X 510±10 mm(D) and back size shall be 450±10 mm(W) X 540±10 mm(H) from seat & overall height = 980±10 mm, overall width = 560±10 mm. (Fixed Chair) |
| 9 | Providing and supplying in position modular workstation in completely knock down conditions with per seat size 1800mm X 600mm X 1500mm that is to be assembled at site. The construction of the main table shall be free standing structure. The worktop shall have the size 1800mm X 600mm made up of 25mm thick PLy IS 710 grade with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with same laminate. A pullout keyboard trey shall be provided of 18mm thick Ply laminate finish. The trey shall be operated on keyboard channel. The workstation shall be a panel based partition system of 60mm thick. The Panel on the front of the user and as well as sides of user shall be of 1500mm height. Upper part of the panels to be finished with 4mm transparent glass & Lower part of the Panel should be finished with approved laminate. Framework shall be made of aluminum alloy extrusions. All Aluminum parts shall be pretreated and duly powder coated of 40µ-50µ thick. All these frame work sections shall be fitted to each other by fasteners of 2mm thickness which is properly zinc coated for corrosion resistant. Raceway shall be provided of aluminum below the work top as per requirement for inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with curve trims. The trims shall be made of aluminum extrusions of size 60x19mm with 1.5mm thick and should be covered with Die Cast End caps on joints, 2 ways, 3 ways & 4 ways caps as required. Wire management partition shall have concealed wire management capabilities and shall be engineered for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. The moduar workstation should be provided with single sided flip-up /pop-up box that bouses Video, Audio, LAN , Data , intercom and 3-socket power connections along with in-house wire management systems instead of providing these facilities below the table top. Zinc coated small top support brackets fixed to the partition frame. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of metal sheet powder coated as per photo enclosed. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. Dimensions Tolerance ±20 mm. (Workstation) |
| 10 | Providing and supplying in position medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. The same shall be upholstered with fabric tapestry 0.8mm thick and 300 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the adjustable armrest shall be used black integral polypropylene arm completely joint with seat. For seating durability the chair shall have synchro tilt 360 degree revolving mechanism with upright position locking and Synchro Tilt adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 120mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle dia. 700mm and fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycle with 250lbs load. The seat size shall be 500±10 mm(W) X 500±10 mm(D) and back size shall be 470±10 mm(W) X 500±10 mm(H) from seat & overall height = 930±10 mm. (Revolving Chair) |
| 11 | Providing and supplying in position storage unit with an overall size 900mm X 450mm X 1500mm. The storage shall be made up of steel 18 gauge. The storage shall have adjustable/fixed shelfs and door shutters shall be provided for opening and closing the storage. The shutter shall be operated with concealed crank hinge with Al die cast handle as well as MP lock mechanism. (Storage Low Height) |
| 12 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 13 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (with 2mm thick) |
| 14 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T”runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately).GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 15 | Electrical Works |
| 16 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 17 | Group 'A' |
| 18 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 19 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 20 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 21 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 22 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 23 | 25 mm |
| 24 | Supplying and fixing of following sizes switch /socket on the existing modular plate and switch box including connections but exluding modular plate as required |
| 25 | 15/16Amp Switch |
| 26 | 6 Pin 15/16 Amp Socket Outlet |
| 27 | 5/6Amp Switch |
| 28 | 3 Pin 5/6 Amp Socket Outlet |
| 29 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 30 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 31 | Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate for modular switches in recess etc.as required. |
| 32 | 3 Module (100mmX75mm) |
| 33 | 6 Module (200mmX75mm) |
| 34 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 35 | Group B |
| 36 | Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 37 | Single Pole |
| 38 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 39 | 40 Amp TPN |
| 40 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 41 | 8 way (4 + 24), Double Door |
| 42 | Removal of Existing LED tube light fixture & Fixing in the new location as required , including connection , testing and commissioning. |
| 43 | Removal of Existing ceiling fan & Fixing in the new location by way of Anchor fasterering in the ceiling as required including connection , testing and commissioning. |
| 44 | Supply and Fixing of ceiling fan (Aluminium Body) operating on max 60W, including wiring, the down rods of standard length (upto 30 cm) with 3x1.5 sqmm FRLS PVC insulated copper conductor single core cables,Phenolic sheet cover etc., as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge. |
| 45 | 1200 mm sweep ceiling fan upto maximum 60w |
| 46 | Supplying,Installation, testing and commissioning of pre-wired, 20W LED ,5700K CCT and aluminium body tubelight fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 47 | Supplying & fixing suitable size GI box wih modular plate andcover in front on surface or in recess including providing andfixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\"curve including connections, painting etc. as required |
| 48 | Providing 900 mm fan rod for the existing/new ceiling fans for RP-126 LAB |
| 49 | Teclecommunication works |
| 50 | 02 Pair Telephone Cables .5mm for 10 numbers of 4-Digit connections |
| 51 | PVC Pipe 1 inch for the laying of 02 Pair cable from Finance Section to Telephone MDF installed at Engineering office |
| 52 | PVC Pipe 1/2 inch for the laying of 02 Pair cable in the Cabins of Finance Section |
| 53 | 04 pair Telephone Cables .5mm for the connectivity of (1+1) plan set between Finance Officer room to Assistant`s cabin) |
| 54 | Fixing and fitting material for PVC Pipes |
| 55 | Networking Works |
| 56 | Supply and installation of CAT-6 UTP LAN cable of approved make, 4-pair, 23/24 AWG, suitable for data networking, including laying/drawing the cable through PVC conduit pipe concealed under wall/plaster, complete with all necessary accessories, bends, junctions, saddles/clamps, and termination at both ends, testing and commissioning, complete as directed by the Engineer-in-Charge. |
| 57 | Installation and termination of CAT 6 information outlet (Keystone + faceplate+SMB) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender