Tender For Providing Kitchen Utensil Equipments For The Work Of Construction Of Hostel Building With 50 Rooms For 150 Students (Mba) Government Arts College At Paramakudi In Ramanathapuram District.(Sub Work)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Oct 2026
15 days left
EMD
9960
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramanathapuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Kitchen Utensil Equipments For The Work Of Construction Of Hostel Building With 50 Rooms For 150 Students (Mba) Government Arts College At Paramakudi In Ramanathapuram District.(Sub Work)
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing of TILTING GRINDER:Made out of ss sheet coverage bottom and bottom wheel base fitted with 1 hp motor for rotation,tilting type capacity:15 ltrs, complete complying with standard specification and as directed by the departmental officers before use. |
| 2 | Supplying and fixing of VEGETABLE CUTTER: Made out of ss sharp blade setup for varies types of vegetable cutting.easy and fast operation no of blades:1., complete complying with standard specification and as directed by the departmental officers before use. |
| 3 | SS PLATE STAND:Supplying and fixing of plate stand made out of 1\\" square pipe and provision for 50 plates capcity and SS supporting rods for holding the plates and the legs fitted with moving wheels.OVER ALL SIZE:(48\\" X 15\\" X 48\\").Complete complying with standard specification and as directed by the departmental officers before use. |
| 4 | Supplying and fixing of WET GRINDER:Made out of ss sheet coverage bottom and bottom wheel base fitted with Single Phase motor for rotation,tilting type capacity:3 ltrs.,complete complying with standard specification and as directed by the departmental officers before use. |
| 5 | Supplying and fixing of DOUGH KNEADER:Made out of ss bottom for fitting with 2 hp motor for rotation,25kg flour mixing capacity, fitted with all accessories complete complying with standard specification.- Single Phase motor |
| 6 | SS IDLY BOX (304 SS.Sheet) SS Idly Box Made out of 18 Guage 304 S.S.Sheet and SS Idly Trays made of 20 Guage SS.Sheets. No Of Idly Trays (6) Idly Box fitted with 3/4\\" drain valve with complete Matt Finish..,complete complying with standard specification and as directed by the departmental officers before use. |
| 7 | Supplying of Following Kitchen VESSELS.,complete complying with standard specification and as directed by the departmental officers before use. |
| 8 | 24''x12'' Aluminium Vessel with Top lid (7 Padi) |
| 9 | 20''x10'' Aluminium Vessel with Top lid (3 Padi) |
| 10 | 25''x13'' Aluminium Vessel with Top lid (8 Padi) |
| 11 | 26''x13'' Aluminium Vessel with Top lid (10 Padi) |
| 12 | 50 Lit Silver Anda with Top lid |
| 13 | 9 Lit SS Buckets(No.9) |
| 14 | Silver Laddle Cooking Spoon(Chinese Laddle -5) |
| 15 | Rice Laddle - SS (Annam Karandi) |
| 16 | Iron Laddle |
| 17 | Iron Soup Strainer |
| 18 | Frying Pan Iron |
| 19 | SS Basin(No.19) |
| 20 | Soup Strainer Basin |
| 21 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action,security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 22 | Manufacturing, Supplying and Fixing of Stainless SteelHand rails for staircase near wet riser using 50mm dia304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L GradeStainless Steel pipe of 25mm dia of 1.60mm thick weldedto the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete complying with standard specification and as directed by the departmental officers |
| 23 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting,bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete complying with standard specification and as directed by the departmental officers |
| 24 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 50mm thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers. |
| 25 | Supplying and Fixing of brass Letters of approved size and colour. The colour treatment process is achieved with MRF Colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes |
| 26 | brass Tamil Letters 25cm size |
| 27 | brass Tamil Letters 20cm size |
| 28 | Supplying and Fixing of Stainless Steel Emblem of 15\\" Size. The colour treatment process is achieved with MRF Colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for 15\\" Size |
| 29 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender