Tender For The Construction Of A Paved Road From Hari Shankar Sinha’S House To Rajiv Sinha’S House In Lohia Nagar Colony, Ward Sarnath.
Tender Value
11.75 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
6 days left
EMD
23500
Bank guarantee accepted
Document Fee
766
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For The Construction Of A Paved Road From Hari Shankar Sinha’S House To Rajiv Sinha’S House In Lohia Nagar Colony, Ward Sarnath.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in Excavation of foundation in ordinary soil including lift upto 1.50 m and lead upto 30 m , and inculiding filling ,watring and ramming of Excavated earth in the space between building and the sides of foundation trenches or into the plinty and removal and disposal surplus warth as directed by Engineer -in-charge upto a sistance of 30 m from the foundation trenches as per SI No.251 |
| 2 | Cement concrente with cement, approved coarse sand and 40 mm stone ballast, in propotion 1:4:8 including supply of all material, labour, T&P etc required for proper completion of work as per SI NO .273 |
| 3 | Class -150 Sub class' A' brick work in 1:4 with cement and approved fine sand of 1.25 F.M. mortor in foundation and upto plinth including supply of all materials, labour and T&P etc compelte as per SI NO .305 |
| 4 | Providing , laying spreading and compacting stone Agrigates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling ,with three wheel 80-100 kn static Rollar in stage of proper grade and camber , applying and brooming stone screening /binding material to fill up the interstices of coarse aggrigates ,watring and compacting to the required density Grading -3 as per Technical Sprcification clause 405. By Manual Means |
| 5 | Providing and applying primer coat with bitumen emulsion (SS1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg per sqm using mechanical means as per Technical Specification Clause 502 |
| 6 | Providing and applying tack coat withEmulsion (RS1) using distributor at the rate of 0.275 kg per sqm on the prepared granular surface Treted with Primar cleaned with Hydraulic broom as per Technical Specification Clause 503.(iii) |
| 7 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm - to 11.2 mm size of aggregates Mix Ratio 2:1 either using penetration grade bitumen or Emulsion tothe required line, grade and level to serve as wearing course on the reviously prepared base,I/C mixing in a suitable plant laying and rolling with three smooth wheeled rollar 80-100 Tonne capacity and finishing to required level as per Tech. specification clause. 508 ( by Meachanical Means ) |
| 8 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 ( By Machenical Mean ) |
| 9 | Brick edgeing on both side of road with 1st class brick 8cm (3\\") wide 12cm (4.5\\") deep laide with mud morter including all Material 'Labour T & P ETC complite . S.I.no765 |
| 10 | Cement concrete with 20 mm. Gauage approved stone ballast, approve coarse sand and cement in the porportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work. S.I. No-279 (b) |
| 11 | 12mm thick plaster in wall in/out side in 1: 4 in cement f/sand mortar work SI 584 |
| 12 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms.per sqm.area same as per MORT&H spece- 8.13.803. |
| 13 | Reflective raised Pavement Markes (Cat Eye/Road Stud) Supply and fixing of raised pavement marker with made of plastic body of RPM/Road stud shall be moulded from ASA (Acrylic styrene Acrylonitrite) of HIPS (High-Impact Polystyrene) or ABS .the marker shall support a load of 13625 kg tested in accordance with ASTM D4280. the reflective panels shall consist reflection of the light entering the lens face.the markers height shall not be less than 10mm and shall not exceed 20mm & width shall not exceed 130mm the base of the marker shall be flat within 1.3mm al road studs shall be legobly marked with name .the contractor shall submit a two year warranty of satisfactory field performance including stipulated retro reflectance of the reflecting pane to stipulated standards, the contractor would be required to replace all such markers withing 15 day of the intimation from the Engineer, at his own cost. the rate shall include all materials labour, T&P, tranportation installation and incidentals all complete ae per direction of the Engineer-in-Charge. |
| 14 | Supply and fixing of FSRC precost Rcc Medium duty man hole cover with fram of size(600x600x75mm) rate aproved by SE RED VNS |
| 15 | Supply and fixing of FSRC precost Rcc Medium duty man hole cover with fram of size(300x300x50mm) rate aproved by SE RED VNS |
| 16 | PCV PIPE 110 MM Rate=225x1.1=247.50 including 10% C.P pcv 110mm |
| 17 | Supply and informatory M.S. sign Board size 1.2x0.90meter made of 18mm gauge M.S sheet fic ISA 40x40x6mm from support in back side by 40x5mm flat iron on all four side along with to vertical post of 2.90mtr Diagonal bracing of size 40x5mm flat iron electrically welded and painted with one coat red oxide primer and 2coat superier quality enamel paint with lettering work of required specified information also L/c fixing in trech both side C.C 1:2:4 size 0.45x0.45x0.50m Required for proper complation of work reference specification S.I No. 502 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender