Tender For Welcome Maintenance Including Misc Repair Work, Periodical Works In Certain Md/Otm Accn At Cdm Under Age B/R (N) No. Ii Of Ge North (North) Secunderabad
Tender Value
45 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
12 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance Including Misc Repair Work, Periodical Works In Certain Md/Otm Accn At Cdm Under Age B/R (N) No. Ii Of Ge North (North) Secunderabad
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | M & L Brick work with fly ash bricks straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM (1:6) complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls/ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 4 | M & L Rendering 15mm thick CM (1:4) on fair faces of brick work or concrete surfaces of walls including finishing the surfaces complete all as specified and directed. |
| 5 | M & L Rendering 10mm thick CM (1:6) on fair faces of brick work or concrete surfaces of wall complete all as specified and directed. |
| 6 | M & L Rendering 5mm thick CM (1:3) on fair faces of concrete surfaces of ceiling complete all as specified and directed. |
| 7 | M & L Preparation of new wall surfaces and applying two coats of Acrylic distemper over and including a coat of alkali resistant primer complete all as specified and directed. |
| 8 | M & L Preparation of new wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over wall/concrete surfaces of any height complete all as specified and directed. |
| 9 | M & L Preparation of new ceiling surfaces and applying two coats of Acrylic distemper over and including a coat of alkali resistant primer complete all as specified and directed. |
| 10 | M & L Preparation of external surfaces of walls and applying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc., such as CEMISTIK PU 50 heavy Duty water proofing coating complete all as specified and directed. |
| 11 | M&L Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 12 | M&L Preparation of old plastered or unplastered surfaces of walls and applying one coat of Acrylic distemper complete all as specified and directed. |
| 13 | M&L Preparation of old plastered or unplastered surfaces of walls and applying two coats of Acrylic distemper over and including a coat of primer complete all as specified and directed. |
| 14 | M&L Preparation of old plastered or unplastered surfaces of ceilings and applying one coat of Acrylic distemper complete all as specified and directed.. |
| 15 | M&L Preparation of old plastered or unplastered surfaces of ceilings and applying two coats of Acrylic distemper over and including a coat of primer complete all as specified and directed. |
| 16 | M&L Preparation of old concrete surface exc 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of primer complete all as specified and directed. |
| 17 | M & L Cleaning of surface with water using pressure washer machine, fill the crack with acrylic based textured crack filler and applying one coat of modified first quality acrylic exterior emulsion paint of approved shade having silicon additives complete all as specified and directed. |
| 18 | M&L Preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 19 | M&L Preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint on ceiling complete all as specified and directed. |
| 20 | M&L Preparation of old wood or wood based surface and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 21 | M&L Applying french polishing on wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying two or more coats of till the desired finish is obtained complete all as specified and directed. |
| 22 | M&L Malamind polish on wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying two or more coats till the desired finish is obtained complete all as specified and directed. |
| 23 | M&L Peparation of old decorated plastered/ unplastered surfaces of walls and applying one coat of plastic emulsion paint complete all as specified and directed. |
| 24 | M&L Preparation of old plastered surfaces of walls and applying one coat of lustre paint complete all as specified and directed. |
| 25 | Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 Sqm each etc including making good of hold fast holes with PCC (1:3:6) type C1 complete all as specified and directed. |
| 26 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n.exc 4 Sqm Each etc making good of hold fast holes with PCC (1:3:6) type C1 complete all as specified and directed. |
| 27 | S&F Aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and directed. Catlouge numbers of Jindal company or equivalent complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 28 | M&L Aluminium powder coated louvered ventilator using rectangular tube of size 63.5 X 52 X 1.5mm thick, blade set, with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 4mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed. |
| 29 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 30 | S & F in repair to 8 mm thick 6063-T-5 Aluminium expendable diamond shape gril for window security mash Decorative of 2.5 cm aperture including necessary Y Section suitable for the same fixed in aluminum window complete all as specified and directed |
| 31 | M&L Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc as fixed in repairs complete all as specified and directed. |
| 32 | S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.4mm & fixed with Stainless wire staples complete all as specified and directed. |
| 33 | Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning exc. 250 Ltrs & n. exc. 500 Ltrss capacity of tank complete all as specified and directed. |
| 34 | Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning exc. 500 Ltrs & n. exc. 1000 Ltrs capacity of tank complete all as specified and directed. |
| 35 | S & F Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algae formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary CPVC/GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore PTMT/Brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank complete all as specified and directed.Cat Part No: HSWS-0050-02- Pure of M/S Syntax |
| 36 | All as above item No 35 But tank of size 1000 Litres.Cat Part No: HSWS-0100-01- Pure of M/S Syntax |
| 37 | Removing of vegetation / plantation on the wall/roof/ any position, of up to double storey building necessary scaffolding upto 6m height and roots, girth n.exc 10cm each and making good of surface and M&L applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete all as specified and directed. (Note:- Brick work, plaster and CI/GI pipe lines shall be measured and paid seperately) |
| 38 | S & F in repair 600mmx450mm beveled edge looking mirror of selected quality glass of thickness not less than 5.50mm, etched desined corners, fixed to wall with 12mm dia spacers at each corners complete all as specified and directed. |
| 39 | S & F Sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 40 | S & F in replacement stainless steel plate rack of size 609mm X 914 X 254 mm complete all as specified and directed. |
| 41 | S & F in repair for glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and directed. |
| 42 | S & F in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and directed. |
| 43 | S & F in repair for corner glass shelf of size 200mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and directed. |
| 44 | S & F in repairs 3 Tier PTMT Corner Shelf of size 250 X 250 X 600mm fixed with screws to walls complete all as specified and directed |
| 45 | S & F in repair CP soap dish , fixed to wall with CP brass screws, complete all as specified and directed. Make: Cat part No: F505106CH of CERA or equivalent in ParryWare/Hindware |
| 46 | S & F in repair Brass CP towel rail complete all as specified and directed. Make: Cat part No: F505104CH of CERA or equivalent in ParryWare/Hindware |
| 47 | S & F in repair Brass CP towel ring complete all as specified and directed. Make: Cat part No: F505105CH of CERA or equivalent model in ParryWare/Hindware |
| 48 | S & F in repairs CP bib cock long nose quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and directed.Make: Cat part No: F505105CH of CERA or equivalent model in ParryWare/Hindware |
| 49 | S & F in repairs Two Way (2 in 1) bib taps with wall flange quarter turn suitable for 15mm bore pipe fancy type brass CP, screwed for iron pipe or brass ferrule complete all as specified and directed.Make: Cat part No: F1015161 of CERA or equivalent model in ParryWare/Hindware |
| 50 | S & F in repairs Pillar taps long body quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrule complete all as specified and directed.Make: Cat part No: F1015453 of CERA or equivalent model in ParryWare/Hindware |
| 51 | S & F in repairs wall mixer brass chromium plated quarter turn 2 in 1 with bend pipe with provision for over head shower with bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and directed. Make: Cat part No: F1015401 of CERA or equivalent model in ParryWare/Hindware |
| 52 | S & F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and directed. Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES equivalent model in ROCA/KOHLER |
| 53 | S & F in repairs for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. of 1 metre long tube & wall hook complete all as specified and directed.Make: Cat No - ALD-CHR-573 of Jaquar or of equivalent model in ROCA/KOHLER |
| 54 | S & F in repair Toilet paper holder of stainless steel, complete all as specified and directed. Make: Cat part No: F5014109CH of CERA or equivalent model in ParryWare/Hindware |
| 55 | S & F in repairs 32 mm bore PVC flexible pipe for wash hand basin complete all as specified and directed |
| 56 | M & L in repairs waste fittings, brass,chromium plated for glazed ware sink/basin etc, size 32mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 57 | S & F in repair grating round 100mm size of CP with/without hole complete all as specified and directed. |
| 58 | S & F in repair brass Handle cost type polished of 150 mm long (selected quality as approved) fixed with Self Tapping screws complete all as directed and specified. |
| 59 | S & F in repair floor door stopper of brass type polished and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified. |
| 60 | S & F in repair brass bareel Tower Bolt of 200 mm long (selected quality as approved) with cast or sheet barrel and rolled or cast bolts and fixed complete all as directed and specified. |
| 61 | S & F in repair Drapery curtain rod of stainless steel 25mm dia of SS 304 garde complete with stainless steel brackets and Decoartive type end globes/side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw complete all as directed and specified. |
| 62 | M & L 18 mm thick shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour water resistant, teRmite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including dismantling board complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 63 | M & L for 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 64 | S & F in repair Continuous (piano) hinges, stainless steel, Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified and directed. |
| 65 | S & F in repair Stainless steel Handle of 100 mm size (modular selected quality of design as approved) fixed with Self Tapping screws complete all as specified and directed. |
| 66 | S & F in repair 200mm long SS decorative soft close zero crank hinges, for kitchen cabnit complete all as specified and directed. |
| 67 | S & F in repairs 200mm long SS decorative handle (modular selected quality of design as approved) fixed with Self Tapping screws complete all as specified and directed. |
| 68 | S & F in repairs SS telescopic type ball bearing drawer channel of load bearing capacity not exceeding 45 Kg anti-rebound function, manufactured with high grade steel for longevity for easy removal of drawer zinc plated for corrosion resistant suitable for the SS kitchen basket of size not exceeding 500mm complete all as specified and directed. |
| 69 | S & F SS Kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 gauge SS 304 grading of size 17'' x 20'' x 4'' complete all as specified and directedMake: Ist quality of SLEEK/HETTICH/EBCO |
| 70 | S & F SS Kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 gauge SS 304 grading of size 17'' x 20'' x 6'' complete all as specified and directedMake: Ist quality of SLEEK/HETTICH/EBCO |
| 71 | S & F SS Kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 gauge SS 304 grading of size 17'' x 20'' x 8'' complete all as specified and directedMake: Ist quality of SLEEK/HETTICH/EBCO Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender