Tender For Repairs To Toilets, Sanitary Fittings, Swr/Pvc Drain Pipes, Masonry And Plaster Works And Connected Civil Works In Dlrl Area Under Age B/R-I, Hyderabad.
Tender Value
39.90 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
20 days left
EMD
79800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Toilets, Sanitary Fittings, Swr/Pvc Drain Pipes, Masonry And Plaster Works And Connected Civil Works In Dlrl Area Under Age B/R-I, Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding /backing coat and removing rubbish off the premises, complete all as directed. |
| 2 | Digging out and removing sunken floor filling and depositing the same at a distance not exceeding 250m away from the outer edge of bldg complete all as directed. |
| 3 | M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in sunken floor/ foundation/ mass filling, complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L PCC 1:2:4 type B-0 (using 12.5 mm grade stone agg)concrete 30 mm thick as sunken floor even and fair to receive top layer complete all as specified and directed. |
| 5 | M&L Rendering 15mm thick as in sunken portion on brickwork or concrete surfaces in cement mortar 1:3 and finished fair and even including mixing of WPC in mortar complete all as directed by Engr-in-charge. Note: Supply only WPC shall be measured and paid separately. |
| 6 | M&L water proofing treatment with polymeric standard membrane of weight not less than 3Kg/Sqm with 90 micro high molecular high density polyethylene film sandwitched between two layers of poly meric (atactic poly propylene based) bitumen laminated on both sides with 20 micron HMHDPE film over a coat of hot blow bitumen of 85/25 grade applied at the rate of 1.2 Kg per Sqm after priming the surfaces with bituminous emulsion at the rate of 100gms per Sqm duly 10cm over lapped and shall be fused uniformly by LPG torch flame on horizontal/ vertical surface of sunken floors complete all as directed by Engr-in-charge. |
| 7 | Supply only integral water proofing compound complete all as directed. |
| 8 | M&L for brick bat aggregate including breaking and grading of bricks and filling in sunken portion complete all as directed. |
| 9 | S&F in repairs 40mm dia GI medium grade pipe as in spouts 45cm long including making in holes in RCC and making good in cement mortar 1:1/PCC 1:2:4 complete all as directed by Engr-in-charge. |
| 10 | M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.06 sqm but n.exc 0.11 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match to complete all as specified and as directed. |
| 11 | M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to matchto complete all as specified and as directed. |
| 12 | M & L for coloured glazed ceramic tiles of size 350x250x7mm /450 x 300 x 7 mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, complete all as specified and as directed. |
| 13 | Rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces to back of tiles complete all as specified and as directed. |
| 14 | Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed. |
| 15 | M & L for 18 to 20 mm thick granite (of any type) machine cut in floor/platform/tread, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including griding and polishing types over screedbed complete all as specified and as directed. |
| 16 | M&L for 18 to 20 mm thick granite (of any type) machine cut in skirting/dado/riser, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including griding and polishing types over screedbed complete all as specified and as directed. |
| 17 | M & L Rounding to edges of granite stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed. |
| 18 | S & F in repairs PVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as directed by Engineer -in-Charge. |
| 19 | S&F in repairs 75mm PVC (SWR) bends any radius complete all as directed. |
| 20 | S&F in repairs 75mm PVC (SWR) single T junction any radius complete all as directed. |
| 21 | S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as directed. |
| 22 | Taking down eaves gutters and rainwater pipes/drain pipe (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories). |
| 23 | S&F PVC (SWR) pipes,110 bore of pipe, single socketed, in any length with rubber ring joints, fixed in position with walls including enlarging existing hole in slab, beam or parapet etc and making good with cement mortar 1:4 complete all as specified. |
| 24 | S&F PVC (SWR) pipes,110 bore of pipe, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. |
| 25 | S&F in repairs 110mm PVC (SWR) bends any radius complete all as directed |
| 26 | S&F in repairs 110mm PVC (SWR) single Y junction any radius complete all as directed |
| 27 | S&F in repairs 110mm PVC (SWR) single T junction any radius complete all as directed |
| 28 | S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed in position with walls including enlarging existing hole in slab, beam or parapet etc and making good with cement mortar 1:4 complete all as specified. |
| 29 | S&F 150mm PVC (SWR) bends any radius complete all as directed. |
| 30 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as directed. |
| 31 | Cleaning of drains by excavating of the filled earth. Vegetation and all forged material average width 45 cm & depth 50cm and removing the excavated material to a distance exc. 50m and not exc. 250m complete all as specified and as directed. |
| 32 | Cleaning surfaces of RCC and AC sheet roofing RCC chajjah , sides of parapet walls by uprooting the unwanted vegetation and scrapping with steel wire brush, watering and sweeping including taking down the leonine trees over roofs and removing the derbis to a distance exc 250m and n.exc.,500m complete all as directed. |
| 33 | Demolition of Brickwork or stone/boulder masonry, build in Cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles. |
| 34 | M&L Brick work with sub- class 'B' class bricks straight or curved on plan exc 6m mean radious in CM (1:6), including demolition of brick work complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4,complete all as specified and directed by Engineer-in-Charge. |
| 36 | 10 mm thick rendering in cement motar (1:6) on brick or concrete faces finished even & smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 37 | M/L for Rendering 5 mm thick in CM (1:3) on fair faces of concrete surfaces ceiling etc, finished even and smooth without using extra cement including taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with watercomplete all as directed by Engineer-in-Charge. |
| 38 | M&L for Preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as directed. |
| 39 | M&L for Preparation of newly plastered surfaces of ceilling and applying three coats of white wash, complete all as directed. |
| 40 | Material and labour 10mm thick rendering on other than faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement complete and including taking down of cement plaster, raking out joints, hacking for key, scrubbing down with water all as specified and directed. |
| 41 | Cleaning and re-fixing old 15mm dia GI water Tubing with and including new ISI marked pipe fittings, in new or old position on walls, ceiling, floors etc., complete all as directed by Engineer-in-Charge. |
| 42 | Cleaning and re-fixing old 20mm dia GI water Tubing with and including new ISI marked pipe fittings, in new or old position on walls, ceiling, floors etc., complete all as directed by Engineer-in-Charge. |
| 43 | S&F in repairs 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified, fixed to walls, concealed in wall and ceiling or laid in floor complete all incl taking down as directed by Engineer-in-Charge. |
| 44 | S&F in repairs in repairs 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified, fixed to walls, concealed in wall and ceiling or laid in floor complete all incl taking down as directed by Engineer-in-Charge. |
| 45 | S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed. |
| 46 | S&F in repair stop valve / angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified. |
| 47 | S&F in repair push type angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified. |
| 48 | S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed. |
| 49 | S&F in repairs 15 mm dia pillar taps long swan neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed. |
| 50 | S & F in repairs PVC connection pipe 15mm dia, 600mm long with PTMT check nuts and washer on both ends complete all as directed by Engineer-in-Charge. |
| 51 | S & F in repairs grating doom 100mm dia of CP complete all as directed by Engineer-in-Charge. |
| 52 | S&F in repairs 32mm waste coupling of cast copper alloy chromium plated (half or full threaded), complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F in repairs 32 mm waste pipe complete all as specified and directed by Engineer-in-Charge. |
| 54 | S & F in repairs two way bib cock, cast copper alloy, chromium plated for size 15mm dia with crutch or butter handle, screwed down for iron pipe complete all as directed by Engineer-in-Charge. |
| 55 | S&F in repairs health faucet cast copper alloy ,chroimum plated including 1.25 mtr long pipe, and all fittings to fix screwed down for iron pipe complete all as specified and directed |
| 56 | S&F in repairs vitreous china wash basin, white, flat back, size 550 X 400 mm incl 32 mm dia PTMT waste coupling, PVC waste pipe incl brackets complete all as specified. |
| 57 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl 32 mm dia PTMT waste coupling, PVC waste pipe incl brackets complete all as specified. |
| 58 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as specified. Please Enable Macros to View BoQ information |
| 59 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender