Tender For special Repairs To Wash Room Incl Sunken Treatment, Plumbing And Sanitary Fittings Of Toilet Blocks Bldgs No P-31, P-32 & P-33 At Aps Narangi Under Ge Narangi
Tender Value
1.03 Crore
Estimated cost
Bid Submission
19 Oct 2026
22 days left
EMD
1.79 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Wash Room Incl Sunken Treatment, Plumbing And Sanitary Fittings Of Toilet Blocks Bldgs No P-31, P-32 & P-33 At Aps Narangi Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and complete all as specified and as directed. |
| 2 | Demolition of cement concrete(unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) and complete all as specified and as directed. |
| 3 | Demolition of reinforced cement concrete of any description (reinforcement cut as required to facilitate demolition) and in any position, above or below ground floors, not otherwise specifically provided for complete all as specified and as directed. |
| 4 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed. |
| 5 | Taking down old defective chowkhats with shutter (without taking off shutters from the frame) n.exc 1.5 sq.m each and removing away from site, complete all as specified and as directed. |
| 6 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and as directed |
| 7 | Taking down cement plaster, any description, on brick or stone walls, etc.including racking out joints, hacking for key, scrubbing down with water, etc. including removal of rubbish material away from site, complete all as specified and as directed. |
| 8 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc. complete all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 10 | Taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified and directed. |
| 11 | Taking up or down 20 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified and directed. |
| 12 | Dismantling water tanks capacity exceeding 250 litres but not exceeding 500 Litres and removing to store complete all as specified and as directed. |
| 13 | Dismantling water tanks capacity exceeding 500 litres but not exceeding 1000 Litres and removing to store complete all as specified and as directed. |
| 14 | Dismantling water tanks capacity exceeding 1000 litres but not exceeding 2000 Litres and removing to store complete all as specified and as directed. |
| 15 | Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of internal dia 150 mm, set in cement mortar complete all as specified and as directed. |
| 16 | M&L for cement concrete M7.5 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate 75 mm thick in sub base for laying tiles, pavings, floorings etc. complete all as specified and as directed. |
| 17 | M&L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate, 25 mm thick in sub base for laying tiles, pavings, floorings etc. complete all as specified and as directed. |
| 18 | M&L 75 mm thick plain cement concrete M10(Nominal Mix) using 40 mm nominal size graded stone aggregates finished surface even and fair as in plinth protection and making 50mm deep joints at every 3 mtr enterval and at every corners and filling the joints with bitumen grade 85/25 and sand mixture 1:3 complete all as specified and as directed. |
| 19 | M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed. |
| 20 | M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed. |
| 21 | Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:3 finished even and fair complete all as specified and as directed. |
| 22 | M&L for Non Skid joint free coloured Ceramic tiles 7 to 8 mm thick (square or rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile, laid over and including screed bed or bedding layer of mortar, 15 mm thick, in CM 1:6, complete all as specified and as directed |
| 23 | M&L Glazed ceramic tiles (Coloured) as in vertical surface 600X 300X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed |
| 24 | M&L for 20mm thick granite (of any type), work in cooking platform, in toilets for fixing wash hand basin, counter slab (table rubbed and polished), in steps, jambs, pillars, window cills and like, fixed in cement mortar 1:4 including pointing in white cement 1:2 using granite / marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thick cement screed in CM 1:4, complete all as specified and as directed. |
| 25 | M&L for rubber moulded chequered cement concrete coloured tiles of size 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry complete all as specified and as directed. |
| 26 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 27 | Providing and laying 60 mm thick factory made cement concrete interlocking coloured paver block of glass fibre reinforced glossy finished vibro compacted conforming to IS 15658: 2021 M35 grade made by block making machine with strong vibratory compaction of approved size, design & shape, cast in rubber mould, of approved colour, laid in required colour and pattern complete all as specified and as directed. |
| 28 | M&L for cement concrete in foundation, filling and mass concrete in M7.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed. |
| 29 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 30 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed. |
| 31 | M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 32 | M&L for precast RCC M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:6) complete with joints to match complete all as specified and as directed. Note: Reinforcement shall be measured and paid seperately |
| 33 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 34 | M&L for RCC M20 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed. |
| 35 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height complete all as specified and as directed. |
| 36 | M&L for mild steel TMT bars any dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed |
| 37 | Material and labour for plastering 5 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:3 finished even and fair complete all as specified and as directed. |
| 38 | Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and fair without using extra cement complete all as specified and as directed. |
| 39 | Material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 with integral water proofing compound finished even and fair complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid for separately. |
| 40 | M&L for cement concrete M15 (Nominal Mix) using 12.50 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks, filling of pressed steel door frame, fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed. |
| 41 | Supply only liquid water proofing compound complete all as specified and directed. |
| 42 | S&F pressed steel frames for doors of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and as directed.NOTE:- Filling hollow of frame with plain cement concrete and/or with cement mortar shall be measured and paid separately. |
| 43 | S&F 35 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed. |
| 44 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ ceosetory windows & other frames/chowkat of size 50x100mm comprising of viirgin PVC polymer of K valve 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index o 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750Kg/Cum, screw withdrawal strength of 2200N(FAce) & 1100 N(Edge), minimum compressive strength of 58N/Sq mm, modulus of elasticity 900N/Sq mm and reristance to spread of flame of class A category with property of being termite/ borer proof, water/mosquito proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: MS hold fast/lugs/SS dash fasteners shall be paid for separately. |
| 45 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain door shutter of 35mm size comprising of virgin polymer of K vaue 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100gms) having maximum density of 650 kg/Cum and screw withdrawal strength of 180N (Face) & 900N (Edge), minimum compressive strength 50N/Sqmm, modulus of elasticity 800N/sqmm and resistance to speard of flame of class A category withproperty of being termite, norer proof and water/moisture prrof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws complete all as specified and directed. |
| 46 | S&F Providing and fixing factory made uPVC colour Sliding window/Vent Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cutand fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories |
| 47 | M&L for cement concrete M10 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks, filling of pressed steel door frame, fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed. |
| 48 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane complete all as specified and as directed. |
| 49 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 50 | S&F aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 150 mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed. |
| 51 | S&F 100 mm medium weight mild steel butt hinges made out of cold reduced low carbon steel or hot rolled carbon steel as per IS 1341: 1992 complete all as specified and as directed. |
| 52 | S&F cast aluminium alloy handle, cast type, 150 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 53 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) with 'P' or 'S' trap white (excluding flushing cistern and flush pipe) including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor, complete all as specified and as directed. |
| 54 | S&F vitreous china squatting pan, 'Orissa\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S' trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed |
| 55 | S&F in repairs oval shpaped vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste CP coupling and 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 56 | S&F in repairs Viterous China urinals, Full Stall stall type, complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, incl urinal spreader 15 mm bore, suitable size of 15 mm bore PVC connection 450 mm long and 40 mm dia bore 600 mm long LDPE incl 40 mm dia bore waste coupling etc complete all as specified and as directed |
| 57 | S&F in repairs PVC deo flushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc 15 mm dai bore PVC connection 450 mm long of Make Cat no BA-502 of Prayag or an equlavent make of Cera/Hindware/Somany)complete all as specified and as directed |
| 58 | S&F in repair 15 mm dia bore Bib Cock long body with wall falnges of Cat Part No - P-6808 of Marco series of Prayag/ F200011CP of classik series of of Hindware/F2002152 of Cera ) incl fixing etc complete all as specified and as directed |
| 59 | S&F in repairs 15 mm dia bore CP fancy type long body Angular stoop cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of Cat Part No - P-6808 of Marco series of Prayag //F200005CP of classik series of of Hindware/ F2002201 of Ceraetc complete all as specified and as directed |
| 60 | S&F in repairs Bib Cock 2 way double handle with CP flange fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc of Cat Part No - P-6812 of Marco series of Prayag/F200004CP of classik series of of Hindware/F2002211 of Cera) etc complete all as specified and as directed |
| 61 | S&F in repairs 15mm dai of bore Chromium plate Pillar taps Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc of Cat Part No - P-6808 of Marco series of Prayag /F200001C of classik series of of Hindware/F2002103 of Cera )etc complete all as specified and as directed |
| 62 | S&F in looking mirror 8 to 9 mm thick area exc 2.00 sqm but not exc 3.00 sqm mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and as directed |
| 63 | S&F in repair 15 mm dia bore Brass health faucet with 1.00 mtr tube & hookd incl fixing etc of Cat Part No -CPHF-6 of Prayag / F160192 of hindware / F803108AB of Cera etc complete all as specified and as directed |
| 64 | S&F in repairs Jet Spreay SS-20 (Butterfly) with 1.0 mtr tube incl fittings of Cat Part No -CPJ-5 of Prayag /Hindware/ Cera etc complete all as specified and as directed |
| 65 | S&F in repair ABS soap dish with brass stand of Cat Part No -CAP-4 of Parayag series / F880001 of Hindware/ F5004106 of Cera incl fixing etc complete all as specified and as directed |
| 66 | S&F in repairs 125mm bore dia Stainless steel shower roses with arms with or without swivel joints, any size, including fixing to steel pipe or union etc Cat Part No -CHOH-8 of Parayag series / F160147 of Hindware/F7020104CH of Cera )incl fixing etc complete all as specified and as directed |
| 67 | S&F in repair Corner Glass Shelf (with brass bracket Bracket) of 200mm long of Cat Part No - DAP-29 /F50051033 of Cera / Hindware) of prayag series incl fixing etc complete all as specified and as directed |
| 68 | S&F in repair Glass Shelf 300mm Long of Cat Part No - CPA-32 of Prayag Series /F890009 of hindware /F5001114 of Cera incl fixing etc complete all as specified and as directed |
| 69 | S&F in repair Stainless Steel Towel Rail Cubix of Cat Part No - CPA-46 of Prayag series / F880005 of Hindware /F5002103 of Cera incl fixing etc complete all as specified and as directed |
| 70 | S&F in repair Brass Towel ring with Round Flange of Cat Part No - CPA-2 of Prayag Jaquar series/ F880007 of Hindware / F5002101 of Cera incl fixing etc complete all as specified and as directed |
| 71 | Supplying & fixing to walls and ceilings or laid in floors 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. |
| 72 | Supplying & fixing to walls and ceilings or laid in floors 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. |
| 73 | S&F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes, all as specified and as directed. |
| 74 | S&F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including 25mm dia ball float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc all as specified and as directed. |
| 75 | S&F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 2000 litres capacity hoisted and fixed in position including including 25mm dia ball float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc all as specified and as directed. |
| 76 | S&F in repairs 20 mm gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed to pipe complete all as specified and as directed. |
| 77 | Supply and fix PVC SWR Nahani/ Floor trap, multi inlet connection, plain with grating including jointing with solvent cement, dia of outlet 75 mm, water seal minimum 50 mm, complete all as specified and directed. |
| 78 | S&F PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110 mm bore fixed to walls/floor, complete all as specified and as directed. |
| 79 | S&F PVC(SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls/floor complete including clamps for securing pipe, complete all as specified and as directed. |
| 80 | S&F PVC (SWR) bends with inspection door (any angle), 110 mm dia conforming to IS 14735: 1999 complete all as specified and directed. |
| 81 | S&F SWR vent cowl, 110 mm dia conforming to IS 14735: 1999 complete all as specified and directed. |
| 82 | S&F PVC SWR bends with inspection door (any angle), 75 mm dia conforming to IS 14735: 1999 complete all as specified and directed. |
| 83 | S&F UPVC Tee(87.5⁰) single, 75 mm dia with inspection door conforming to IS 14735: 1999 complete all as specified and directed. |
| 84 | S&F SWR Tee(87.5⁰) single, 110 mm dia with inspection door conforming to IS 14735: 1999 complete all as specified and directed. |
| 85 | S&F UPVC branch piece, Wye (45⁰) double, 110 mm dia without inspection door conforming to IS 14735: 1999 complete all as specified and directed |
| 86 | S&F SWR branch piece, Wye (45⁰) single, 75 mm dia without inspection door conforming to IS 14735: 1999 complete all as specified and directed. |
| 87 | S&F in repair SWR vent cowl, 75 mm dia conforming to IS 14735: 1999 complete all as specified and directed. |
| 88 | Complete removal exising treatment (External/Internal wall) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed. |
| 89 | M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed |
| 90 | M&L for preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion with auto roller for making the surface uniform over one coat of suitable primer complete all as specified and as directed |
| 91 | M&L for preparation of old decorated surfaces of washed by complete removal of existing treatment and applying two coats of distemper oil emulsion including 1 mm thick wall care putty complete all as specified and as directed. |
| 92 | M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed |
| 93 | M&L for Preparing Old plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed |
| 94 | M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and as directed. |
| 95 | M&L for preparation of old painted wood or wooden surfaces, of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 96 | Preparation of old or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 97 | M&L for preparation of old painted surface of steel and iron of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed (Spray painting). |
| 98 | Preparation of newly or previously untreated plaster surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer of the same manufacturer complete all as specified and as directed. |
| 99 | M&L for Preparation of old plastered surface, asbestos/cement boards, concrete surface, stones of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 100 | M&L for Preparation of old plastered surface, asbestos/cement boards, concrete surface, stones of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender