Tender For Addn/ Altn Of Bldg No P-83 (1-8), Surya Line Of 14 Inf Div Sign Regt Under Age B/R-Ii At Ge, Clement Town.
Tender Value
42.70 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
16 days left
EMD
85400
Bank guarantee accepted
Document Fee
50
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/ Altn Of Bldg No P-83 (1-8), Surya Line Of 14 Inf Div Sign Regt Under Age B/R-Ii At Ge, Clement Town.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed |
| 2 | M&L for brick work except bricks sub class B old size bricks straight or curved plan exc 6m mean radius built in cm 1:6 including Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etccomplete all as specified. |
| 3 | M&L for 75mm thick PCC 1:3:6 type C2 (Using 20mm graded stone aggregate) as in plinth protection/path/hard standing laid in panels, finish the top surfaces even and smooth including demolition of PCC of any description, in any position etc complete all as specified and directed |
| 4 | M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement including Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified |
| 5 | M&L for preparation of newly plastered surface of wall and applying two coats of internal acrylic distemper including a coat of primer of approved tint over a coat of wall care putty complete all as specified and directed |
| 6 | M&L for applying two coat of internal acrylic distemper of approved tint over a coat of wall care putty on walls after complete removal of existing treatment and preparation of old plastered surface by rubbing down, washing complete all as specified and directed |
| 7 | M&L for 15mm thick plaster in CM 1:4 on fair face of brickconcrete surface or walls finished even and smooth without using extra cement including Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified |
| 8 | M&L for applying two coats of acrylic exterior emulsion paint (Apex) over a coat of primer after preparation of newly plastered/concrete surfaces on wall complete all as specified |
| 9 | M&L for applying two coats of weather proof exterior emulsion paint (Apex) after complete removal of existing treatment including preparation of old plastered/concrete surfaces on wall complete all as specified |
| 10 | M&L for one coats of white wash to old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed |
| 11 | M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls including Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed |
| 12 | M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and directed |
| 13 | M&L for mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 14 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete and making good to disturbed portion to match the existing surface all as specified and directed |
| 15 | Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) and making good to disturbed portion to match the existing surface complete all as specified and directed |
| 16 | M& L Solid (100 mm X 63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed. |
| 17 | M& L Solid (125mm X 63 mm Double rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed. |
| 18 | S&f factory made single extruded WPC (wood polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K valve 58-60 (Suspension Grade ) , calcium carbonate and natural fibers (wood powder/rice husk, wheat husk ) and non toxic additives (maximum toxicity index of 12 of 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as per direction of Engineer-in-Charge. |
| 19 | S&F 35 mm thick factory made wire mesh solid WPC Prelaminated both side door shutter consisting of Density 650 kg/cum manufactured by an ISO 9001-2015 certified company . Door to be panelled with SS mosquito Mesh and XTN aluminium mesh for additional strength and safety purpose (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos MS powder coated butt hinges size 100x 25x2mm and 32 mm long steel screw drilled suitable to pass through both the walls of the MS tube. Other hardware should be fixed with 19x 6 mm size steel screws etc complete all as per directions of Engr-in-Charge , manufacturer's specification and drawing complete all as specified and directed. |
| 20 | S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed |
| 21 | S&F Windows made fabricated from roll formed sections made of galvanised steel Colour coated/powder coated (Base steel as per IS 513 of “D” Quality galvanized as per IS 277 with zinc of 120 GSM/sqm wirh coated thickness of 0.60 mm) and Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer or powder coated with pure polyster powder up to 50-60 microns thick.Section for outer frame should be of 98x50mm, centre mullion should be of 46x70mm, section for fixed glass beading should be of 18x25mm and section for shutter should be of 46x46 mm. Section for Fly mesh shutter section should be of 20x40mm. Frame and Mesh shutter Sections are to be cut to length mitre joined with corner bracket made of Polypropylene . Glass shutter with mitred joint with corner brackets made of CRCA eletroplated. Mullion section should be joined with frame using Nylon Cap Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter between frame and glazed shutter and both sides of fixed glass. Spoon profile should be used around Fly mesh to fixed in Mesh shutter. Each shutter should be provided with SS Pivot Hinges-1 set, Handle shall be provided per shutter.Window frame should be fixed to bricl/concrete masonry by using Nylin self-expanding caps and driving MS electroplated 80 mm long screws into caps through frames.The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter with 0.32 Guage fly mesh of 304 grades with 144 holes per square inch.Windows should be provided with grill made of 110 mm Centre to centre, 6mmx12mm MS Flat.Total grill unit should be powder coated and fixed to window frame with screws complete all as specified and directed. |
| 22 | M&L for Non Skid coloured ceramic tiles 8-9mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 including Dismantling of tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 23 | M&L for Non Skid coloured ceramic tiles 8-9mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles including Dismantling of tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 24 | M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm (400x400mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete including Dismantling of tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 25 | M&L for coloured Glazed ceramic tiles in vertical surfaces 300x450x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:4 including, Dismantling of tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 26 | M&L Baroda green marble 14 -16 mm thick (table rubbed and polished) in step, jambs, pillars , window cills, cooking plateforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM 1:6 including dismantling old complete all as specified and directed |
| 27 | M&L for Machine cut Kota stone slab flooring 16-20 mm thick, laid over & including screed bed of 20 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing including dismantling old complete, all as specified. |
| 28 | M&L for Kota stone slab 16-20 mm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling old complete all as specified. |
| 29 | S&F in repair rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed |
| 30 | S&F 250mm stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate |
| 31 | S&F 100mm size stainless steel butt hinges medium weight ISI marked, cold rolled |
| 32 | S&F 200mm long stainless steel barrel tower bolts all as specified |
| 33 | S&F 150mm size stainless steel handles all as specified |
| 34 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 35 | M&L 110mm dia PVC pipe soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches including dismantling old complete all as specified and directed |
| 36 | M&L 75mm dia PVC soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches including dismantling old complete all as specified and directed |
| 37 | S&F 75 mm floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 38 | S&F in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed. |
| 39 | S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed. |
| 40 | S&F in repair PVC (SWR) Single T 100mm dia, equal or unequal as required and jointed with approved adhesive complete all as specified and directed |
| 41 | S&F in repair PVC (SWR) Single T , 75mm dia, equal or unequal as required and jointed with approved adhesive complete all as specified and directed |
| 42 | S&F PVC cowls 75mm complete all as specified and directed. |
| 43 | S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified |
| 44 | S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified |
| 45 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed. |
| 46 | S&F in repair 600x450x5mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specified |
| 47 | S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified. |
| 48 | S&F in repair 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified. |
| 49 | S&F in repair 15mm Stop valve angle cock fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified |
| 50 | S&F in repair chromium plated brass shower roses with or without swivel joints 125mm size including shower arm complete all as specified |
| 51 | S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified |
| 52 | S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed. |
| 53 | S&F in repair 20 mm dia brass CP tubular towel rail D type 600mm long complete all as specified and directed. |
| 54 | S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface including Taking up or down 15mm dia steel tubing complete in all respect as specified |
| 55 | S&F in repair 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified |
| 56 | S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface including taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from sitecomplete in all respect as specified |
| 57 | S&F in repair 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified |
| 58 | S&F in repair of 20mm dia SS drapery rod, fancy type, SS knobs and brackets, fixed in any length complete all as specified and directed |
| 59 | S & F Stainless steel kitchen plate rack 1.0 mm thick sheet of over all size 750 x 900 x 250 mm fixed with steel screws and steel rawal plugs Complete all as specified and directed. |
| 60 | M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM 1:6 over 75mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer including dismantling old complete all as specified and directed |
| 61 | M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping, edging including necessary form work complete all as specified |
| 62 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed |
| 63 | M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed |
| 64 | S&F in repair 18 mm thick with min density 600 Kg/Cum LEAD FREE PVC Celuka ply of one side laminated and other side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed |
| 65 | S&F 150mm Hasp and staple stainless steel, including bolt to hinge plate and fixed with screws all as specified and as directed |
| 66 | S&F auto closing hinges 35mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for cupboard/kitchen cabinet shutters complete in all respect and fixed in position all as specified |
| 67 | S & F D-type cabinet handles premium quality, stainless steel 304 / gloss chrome / SN finished 150 mm long matt finished complete fixed in position complete all as specified and directed. |
| 68 | S&F MS work as in doors or gates, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed by Engr-in-Charge. |
| 69 | S&F welded steel wire fabric weight n. exc 4 Kg per Sqm suitable to weld with steel members complete all as specified and directed by Engr-in-Charge |
| 70 | M&L for preparing new steel and iron surfaces of any description over 10 cm Width /Girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as directed |
| 71 | Excavation in post hole (or similar holes) each n. exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in any type of soil complete all as specified and directed. |
| 72 | M&L for cement concrete 1:3:6 type C1 (Using 20mm graded stone agrregate) as in foundation of posts, railing and similar work complete all as specified and directed by Engr-in-Charge |
| 73 | S&F Rolled mild steel work of Fe-290 (Gde E-165) as in framed work, trussed, purlins, crane gantries, poles, rail S&F fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections square/rectangular hollow section or other section) including distance pieces, cleats etc |
| 74 | S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified. as specified. |
| 75 | M&L PCC 1:5:10 type E-2 (using 40 mm graded brick aggregate) as in filling, mass concrete, sunken floor including demolition of PCC of any description and in any position etc complete all as specified and directed Please Enable Macros to View BoQ information |
| 76 | M&L PCC 1:5:10 type E-2 (using 40 mm graded brick aggregate) as in filling, mass concrete, sunken floor including demolition of PCC of any description and in any position etc complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender