Tender For Welcome Maintenance To Offr Accn And Certain Repair To Door, Windows, Kitchen Cabinets, Cupboards, Shelves, Plumbing Works And Sanitary Fitting In Officer Md, Otm And Allied To B3 Area Of Age B/R-Ii Under Ge (W) Jrc
Tender Value
45 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance To Offr Accn And Certain Repair To Door, Windows, Kitchen Cabinets, Cupboards, Shelves, Plumbing Works And Sanitary Fitting In Officer Md, Otm And Allied To B3 Area Of Age B/R-Ii Under Ge (W) Jrc
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Cement Plaster of any description on Brick Walls, concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debris/ rubbish etc, complete all as specified and as directed. |
| 2 | M&L Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 3 | M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall putty, all as specified & directed. |
| 4 | Material and labour for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ). |
| 5 | Supply only integral water proofing compound all as specified and directed. |
| 6 | M&L for prepartion of new plastered surface of wall and applying two coat of cement base paint, complete all as specified and directed. |
| 7 | M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified |
| 8 | M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed. |
| 9 | M&L for complete removal of existing treatment of old decorated wall scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc (Plastered or unplastered surfaces) etc and applying one coat of acrylic exterior emulsion paint applying by mechanical spray gun complete all as per manufacturer instruction and as specified and directed.(Note :- Height for bldgs up to four storey) |
| 10 | Material and labour for preparation of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil emulsion distemper complete all as specified and directed |
| 11 | Material and labour for preparation of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying two coat of oil emulsion distemper complete all as specified and directed |
| 12 | M&L complete removal of existing treatment on wall and applying two coat of oil emulsion distemper on one coat of putty filling 1mm thick on walls (surface finished even and smooth ), complete all as specified and directed. |
| 13 | M&L for prepration of old surfaces of walls including brooming down or steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc (Plastered or unplastered surfaces) and applying one coat of white (lime) wash complete all as specified and directed. |
| 14 | All as per item No 13 above but one coat of white wash on ceiling . |
| 15 | M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 17 | Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 18 | M&L for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:-(i) Application of Two component acrylic modified cementitious coating(aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:-(bb) Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex or equivalent to approved makes as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required.(cc) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO or equivalent to approved makes.(dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO or equivalent to approved makes of viscosity as per manufacturer's instructions. (ee) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP or equivalent to approved makes whilst the first coat is wet.(ff) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO or equivalent to approved makes of viscosity as per manufacturer's instructions on the entire area.(gg) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat.(hh) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces three sides including dismantiling of existing tiles.(ii) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.(jj) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO or equivalent to approved makes conforming to IS 2645.Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO or equivalent to approved makes conforming to IS 2645.\\"(kk) All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP or equivalent to approved makes.(ll) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations.(mm)Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE.(ii) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealent.(iii) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around.(iv) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40mm stone aggregate) complete all as specified.(v) Providing drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall ( Approx 450mm to 600 mm long ) including cutting to existing wall and making good the disturbed surface complete all as specified and directed.(vi) Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified. Note:-Item No 18 (iv),(v) &(vi) shall be measured and paid separately. |
| 19 | M&L Cement concrete 1:5:10 type E-2 (using 40mm stone aggregate) as in sunken flooring complete all as specified. |
| 20 | S&F drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall (Approx 450mm to 600 mm long ) including cutting to existing wall and making good the disturbed surface complete all as specified and directed. |
| 21 | M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified. |
| 22 | Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified |
| 23 | Material and labour for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in while or coloured cement to match over and including 15mm thick bedding layer CM 1:6 in complete all as specified |
| 24 | Material and labour for coloured glazed tiles of size 450x 300x7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 25 | M&L Vitrified Ceramic tiles light shade, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles over and incl 15mm thick screed bed in CM 1:6 all as specified. |
| 26 | All as per srl item No.25 but in skirting and 10mm thick rendering as backing coat of CM 1:4 |
| 27 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm, in floors etc, laid over and including15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed . |
| 28 | M&L for 20 mm thick machine cut granite (of any type ) tiles stone jointed with neat cement slurry mixed with pigment to match the colour of stone incl cutting and polishing and making hole in stone and RCC shelves suitable for gas pipe, with round edges where required and incl 15mm screed bed with CM1:6 including dismentling of existing granite complete all as specified and directed. |
| 29 | M&L for Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed base in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, treating the surface with bees wax polish, complete all as specified and directed . |
| 30 | M&L for kota stone slab 20-25mm thick in riser of steps, skirtings, dado and pillar, laid over and including 15mm thick cement screed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, treating the surface with bees wax polish, complete all as specified and directed . |
| 31 | Petty repair to Steel rolling shutters system of size up to 12 Sqm and any description including reparing of ball bearing, top cover, anchoring rod, hasp and staple,gear operated system,crank handle, chain wheel and hand chain including necessary welding, grreesing etc and making the shutters complete serviceable including taking down & refixing in same opening all as per existing pattern as specified |
| 32 | M&L for plastering in patches not exceeding 3 sqm in each patch, 15 mm thick in cement mortar 1:6, finished even and smooth (without using extra cement) including taking down plastering and three coats of white/colour wash maching with existing surface complete all as specified. |
| 33 | M&L for plastering in patches not exceeding 3 sqm in each patch, 5 mm thick in cement mortar 1:3 on ceiling , finished even and smooth (without using extra cement) including taking down plastering and three coats of white wash complete all as specified. |
| 34 | M&L for repairing of RCC projections, chajjas , roofs, facia etc. in patches not exceeding 3 Sqm in each patch by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor. |
| 35 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified. |
| 36 | All as per srl item No. 35 but area exc 1.5 Sqm and not exc 4 Sqm each. |
| 37 | Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed. |
| 38 | Material and labour for framed work as in doors or gates of angle or other section with gusset plates, hold fast rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed. |
| 39 | S&F pressed steel frames 125x60mm as per IS for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including PCC 1:5:10, type B0 (20mm aggregate) filling in steel frame complete all as specified |
| 40 | All as per item no. 39 but 105x60mm size |
| 41 | S&F for 35mm thickness of factory made flush shutter solid core construction with block board core & ply wood face panels, commercial type on both side including 35 x 6 thick 2nd class Hard wood lipping on edge, complete all as specified and directed. |
| 42 | Supply and fixing glazed and skeleton shutters factory made 35mm thick open rebated and prepared to receive glass, gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a) complete all as specified and directed |
| 43 | S&F Plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln seasoned and chemically pressure treated 35mm thick. |
| 44 | S&F mild steel framed work for such as guard bars/grills,grating atc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door ,railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified and directed |
| 45 | Supply and fixing sheet glass ordinary quality 4.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified |
| 46 | M&L in repair for 4 mm thick plain glass fixing and glazing with oil putty/nails wire including haking out old broken glass in wooden/steel frame complete all as specified and directed |
| 47 | Supply & fix factory made steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. |
| 48 | All as per item No 47 and above but window with glazed shutter. |
| 49 | S&F mild steel work as in as in grill gratings etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed. |
| 50 | Supply and fixing galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed. |
| 51 | Supply and fixing in repair galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed. |
| 52 | M&L preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying two Coats of Synthetic Enamel Paint (1st quality/ grade) over a Coat of Pink Primer, complete all as specified and as directed. |
| 53 | M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a cot of primer, complete all as specified and directed. |
| 54 | Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and directed . |
| 55 | S&F steel rolling shutters, 1.25mm thick laths with gear operated type with bevel gear box and crank handle, ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, complete all as specified and directed . |
| 56 | S&F rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe 410 (Gde E-250) quality A , complete all as specified and directed . |
| 57 | S&F Fe 410 (Gde E-250) quality A rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed . |
| 58 | Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings including ridges, translucent sheets etc, complete all as specified and directed . |
| 59 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed . |
| 60 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed . |
| 61 | Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving not exceeding 15cm thickness (below or above ground level) etc, complete all as specified and directed . |
| 62 | M&L for cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed . |
| 63 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and smooth (without using extra cement), complete all as specified and directed . |
| 64 | M&L 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed. |
| 65 | M&L for coloured cement concrete chequered tiles 300x300x22 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 20mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed. |
| 66 | M&L PCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work complete all as specified. |
| 67 | S&F powder coated aluminium frame for doors,windows, partitions ,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 68 | S&F powder coated of any colour aluminum door shutters , aluminium section weighing not less than 0.55 Kg/ Rm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 69 | S&F powder coated of any colour aluminum window and ventilator shutters, side hung type with sash bars, aluminium section weighing not less than 0.55 Kg/ Rm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 70 | M&L for 5.50 mm thick glass sheet, ordinary quality and glazing with oil putty in square complete all as specified. |
| 71 | S&F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors & Cabinets. |
| 72 | S&F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) One side Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors and Cabinets. |
| 73 | M&L for 19/20mm PVC cupboard shutter one side with decorative choice lamination and other side balancing white lamination, fixed with screws to framed work including fixing arrangement, complete all as specified and directed . |
| 74 | S&F 18mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work, complete all as specified and directed . |
| 75 | Resecuring or earsing and adusting without taking down of shutters of any description exc 1 sqm and n-exc 2 sqm each complete all as specified and directed. |
| 76 | S&F in repair 12 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter,shelves etc including removing old work from site any thickness complete all as specified |
| 77 | Petty repair to wooden/PVC Cup Board shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats |
| 78 | Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats |
| 79 | S&F in repair steel window handle MS painted with black japan left or right side complete fixed as directed |
| 80 | Welding in repairs not exceeding 2.5 cm in length & thickness of metal to be welded not exceeding 6 mm complete all as specified including material & labour. |
| 81 | S&F 40mm wide 3 to 6 mm thick tappered rubber beading fixed to door shutter with nails as in repair all as specified. |
| 82 | S&F 2nd class hard wood plain fillets square or rectangular or tri angular in section and bull- nosed, splayed, chamfered or rounded on one edge or face, clean sawn planed on both sides secured with nails or beads in section exc 3 sq cm but not exc 6 sq cm including painting all as specifier and directed. |
| 83 | M&L in repair for stainless steel pipe 25 mm dia curtain rod fixed with finials including pair of decorative complete pair of side brackets (both side), shade as approved by GE all as specified. |
| 84 | S&F in repair 20mm dia curtain rails stainless steel , chromium plated fixing in cup board with brackets, stops, rollers etc, all as specified |
| 85 | S&F 50 X 15 mm size magnet door catcher for closing for PVC shutter/cupboard complete as specified and directed. |
| 86 | S&F 100 mm size MS mat / glossy finish handle complete as specified and directed. |
| 87 | S&F auto hinges for cabinet case (Make ; KARF/HETICH or equivalent to approved makes) |
| 88 | S&F Mild steel rollers and plate suitable for sliding drawers, complete all as specified and directed. |
| 89 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing |
| 90 | Supply and fixing PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing |
| 91 | S&F 100mm size MS butt hinges medium weight , complete all as specified and directed. |
| 92 | S&F100mm size stainless steel butt hinges for fixing to PVC doors all as specified. |
| 93 | Supply and fixing aluminium anodised barrel tower bolts of extruded section 150mm long, complete all as specified and directed. |
| 94 | All as per item No. 93 above but in repairs |
| 95 | Supply and fixing aluminium anodised barrel tower bolts of extruded section 200mm long, complete all as specified and directed. |
| 96 | All as per item No. 95 above but in repairs |
| 97 | S&F Extruded aluminium alloy handles, fabricated type,anodised 100 mm in size, complete all as specified and directed. |
| 98 | All as per item No. 97 above but in repairs |
| 99 | S&F Extruded aluminium alloy handles, fabricated type,anodised 150 mm in size, complete all as specified and directed. |
| 100 | All as per item No. 99 above but in repairs |
| 101 | S&F Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, complete all as specified and directed. |
| 102 | All as per item No. 101 above but in repairs |
| 103 | S&Fin repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate in repair complete all as specified and directed. |
| 104 | Supply & fixed floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified |
| 105 | All as per item No. 104 above but in repairs |
| 106 | S&F continuous (Piano) hinges, mild steel, bright finish or electro galvanised width of flaps 40 mm when open complete all as specified. |
| 107 | S&F 100 mm Hasp & Staple extruded aluminium alloy , fabricated type, anodised including bolt to hinge plate and fixed with screws with Cup Board shutter, All as Specified |
| 108 | All as per item No. 107 above but in repairs |
| 109 | S&F in replacement aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified as directed. |
| 110 | S&F Rim latch 125 mm with two levers, of mild steel body stove enamelled finish; with brass knob or lever handle and fixed all as specified directed. |
| 111 | S&F in repairs 40 mm dia powder coated cup board knobs fixed with nut, screws and washer of mild steel bright finish complete all as specified. |
| 112 | Supply and fixing in repair Bib tap chromium plated, cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed. |
| 113 | S&F in repair fancy CP center hole basin mixer (Swan Neck) of Make cera, Jaquar Cat No FLR-5167NB or Kohler or equivalent to approved makes suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 114 | S&F in repair fancy CP pillar cock with lift type operating, chromium plated of make cera, Jaquar CAT No FLR-5015 or Kohler or equivalent to approved makes suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 115 | S&F in repair fancy CP Concealed Stop Cock with Adjustable Wall Flange make cera, Jaquar CAT No OPP-15083KPM or Kohler or equivalent to approved makes suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 116 | S&F in repair fancy CP angular stop Cock with Wall Flange of make cera, Jaquar CAT No OPP-15053PM or Kohler suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 117 | S&F in repair fancy CP 2 way angular stop Cock with Wall Flange Make cera, Jaquar Cat No 6811 or Kohler or equivalent to approved makes suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 118 | S&F in repair fancy Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of makes of Make cera,Jaquar Cat No FLR-5281N or Kohler or equivalent to approved makes suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 119 | S&F in repair fancy CP Sink cock swinging spout (Wall mounted) with connecting legs & wall flanges of Make cera,Jaquar Cat No FLR-5347N or Kohler or equivalent to approved makes suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed |
| 120 | S&F in repair fancy Over Head Shower square wall shower (Adjustable) of size 100mm including all fittings of Make cera.Jaquar Cat No OHS-1661 or Kohler or equivalent to approved makes suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed |
| 121 | S&F in repair fancy Hand Shower 100mm round shape(ABS Body chrome plated with Gray face plate) with 1.50 Mtr flexible tube and hook of Make cera,Jaquar Cat No HSH-1937 or Kohler or equivalent to approved makes suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 122 | S&F in repair fancy towel rail/rod, D type, 600mm long of Make cera,Jaquar Cat No CAN-1111SM or Kohler or equivalent to approved makes fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed. |
| 123 | S&F in repair fancy towel ring square type flange of Make cera,Jaquar Cat No CAN-1121N or Kohler or equivalent to approved makes fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed. |
| 124 | S&F in repair health faucet 1.00mtr long flexible tube & wall hook of Make,cera, Prayag Cat No BEA-41 or Jaquar/Kohler or equivalent to approved makes suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed. |
| 125 | S&F in repair Jet spray with holder for EWC 1.00 mtr long of Make Prayag Cat No BEA-17 or equivalent makes of Group I of Appx “B” suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed. |
| 126 | S&F in repair, toilet paper holder of MAKE: cera,Jaquar CAT No. CAN-1153S or Kohler or equivalent to approved makes and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 127 | S&F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 128 | S&F in repair new flexible PVC waste pipe of approved quality 32 mm bore, 75 cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed |
| 129 | S&F in repair, Coloured PVC bath Cabinet of size 450x450x90mm with Looking Mirror (as approved) fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed. |
| 130 | S&F in repairs bevelled edge looking mirror of selected quality glass, 5.5 mm thick of size 450 x 600 mm, PVC moulded case mounting on 6 mm thick AC building board or commercial ply wood on back and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs, complete all as specified and directed |
| 131 | S&F in repair looking mirror of size not execeeding 1.5 sqm of 5mm thick of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass and cup washer, complete all as specified and directed. |
| 132 | S&F in repair, Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed. |
| 133 | S&F in repair, Sheet Glass Corner Shelves Assembly (Transparent), consisting of 5.5mm thick Sheet Glass Shelf with Chromium plated Bracket Guard and Railing, Make Jaquar CAT No CAN-1173 or kohler or equivalent to approved makes complete all as specified and as directed. |
| 134 | S&F in repair fancy chromium plated soap dish, complete all as specified and directed. Make : Prayag or equilvant to approved makes. |
| 135 | S&F Vitreous China White Wash Down Water Closet Pan (EWC) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces including dismantling the existing unserviceable Water Closet complete all as specified and as directed. |
| 136 | S&F coloured vitreous china wash down one piece water closet with seat cover , hinges, Accessories set, size 380x655x765mm floor mounted of make cera,Jaquar CAT No-LYS-WHT-38751P180UFSMZ or equilvant to approved makes fitting with twin flush fitting with inlet ball valve float and handle, incl fixing bolt, with bottom and cover and mild steel chromimum plated hinging device with complete fixed in repairs all as specified and directed . |
| 137 | S&F Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. |
| 138 | S&F in repair, White Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device, complete all as specified and as directed. |
| 139 | S&F in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing unserviceable Cistern complete all as specified and as directed. |
| 140 | S&F Vitreous China Wash Hand Basin of size 550x400mm (Flat Back or Angle Back type) with pedestal including 32mm bore (dia) Brass Chromium plated Waste Fitting, a pair of Cast Iron Bracket duly painted / Erecting Stand including cutting and pinning in Ends Making Good disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing unserviceable Wash Basin complete all as specified and as directed. |
| 141 | S&F in repair, Stainless Steel Sink with Drainage Board 1.0mm thick Over-all size 915x460mm and Bowl size 410x330x160mm for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Brass Chromium Plated, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 142 | S&F in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum), complete all as specified and directed. |
| 143 | S&F in repair, Stainless Steel Kitchen Rack of size 750x800x200mm (Thickness of Sheet not less than 0.63mm) with Mild Steel Brackets and fixed to Wooden Plugs with Chromium Plated Brass Screws and Cup Washers, complete all as specified and as directed. |
| 144 | S&F in repairs vitreous china Urinal, Half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement. Complete all as specified and directed . |
| 145 | S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) Complete all as specified and directed . |
| 146 | S&F in repairs vitreous china urinal partition white of size 310x700 mm. Complete all as specified and directed . |
| 147 | S&F chromium plated grating 100 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed. |
| 148 | S&F in repairs 32mm dia PVC waste coupling for WHB or Sink (half or full threaded) complete all as specified and directed |
| 149 | M&L for chromium plated peg set of 5 (PTMT), fixed with screws and plugging to rear side of door shutter in bath, complete all as specified and directed. |
| 150 | M&L dis-connecting existing PVC tank of any capacity, setting aside (or lowering, if required) for repairs, cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc and finally washing the internal surfaces with bleaching powder/soap solution etc, re-connecting and re-fixing in position including making connections complete all as specified and directed. |
| 151 | Dismantling PVC water tank of capacity 500 Ltr and S&F new rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed . |
| 152 | Dismantling PVC water tank of capacity 1000 Ltr and S&F new rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed . |
| 153 | Dismantling PVC water tank of capacity 2000 Ltr and S&F new rotational moulded polyethylene water storage tank of capacity 2000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed . |
| 154 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified. |
| 155 | S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 156 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 157 | Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipe complete all as specified |
| 158 | Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified |
| 159 | M&L Galvanised iron water tubing 15 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified |
| 160 | All as per srl item No. 159 but for 20mm bore tube |
| 161 | M&L CPVC water tubing 20 mm outer dia, with & including all fittings fixed to wall, ceilings and or laid in floors etc, complete all as specified |
| 162 | All as per srl item No. 161 but for 25mm bore tube |
| 163 | M&L in repair CPVC reducer 20mm to15mm, complete all as specified |
| 164 | S&F for PVC cover of water tank maching with existing water tank complete all as specified |
| 165 | Petty repair to leaking flushing cistern low/high level, incl adjustment in the internal fitting repair to PVC bends pipe, flush pipe etc all as per directed |
| 166 | S&F in repair new ware PVC Syphon For Flush Tank (White) Cistern Part Flush Tank Lever as specified and directed. |
| 167 | Petty Repair for stop leaking Bib tap/ Pillar tap/Stop cock by suitable jumper washer and etc, complete all as specified |
| 168 | Dismantling of brick work or stone/boulders masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. and rubbish materials remove from site all as specified and directed |
| 169 | Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 |
| 170 | All as per Item No 169 but except bricks |
| 171 | Demolition of reinforced cement concrete(reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for. Complete all as specified and directed |
| 172 | M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed |
| 173 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat, complete all as specified and directed |
| 174 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to. Complete all as specified and directed |
| 175 | M&L for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over walls, digging out roots and making good the disturbed portion of wall with PCC (1:3:6) type C-1 using 20mm graded stone aggregate including matching the same complete all as specified & directed. |
| 176 | Cleaning of roof removing bushes, mud, debries, digging out Existing Surface roots and making good the disturbed portion of roof tiles with tiles including matching the same complete all as specified & directed. |
| 177 | Taking down eaves gutters and rainwater pipes/sewage pipe (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store. |
| 178 | S&F 110 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed. |
| 179 | S&F 75 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed. |
| 180 | S&F 110 mm dia PVC (SWR ) bends any radius complete all as specified and as directed. |
| 181 | S&F 75 mm dia PVC (SWR ) bends any radius complete all as specified and as directed. |
| 182 | S&F 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls complete all as specified and as directed. |
| 183 | S&F 75 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls complete all as specified and as directed. |
| 184 | S&F 75mm dia PVC (SWR ) vent cowl complete all as specified and as directed. |
| 185 | M&L 75mm PVC (SWR) PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed. |
| 186 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed . |
| 187 | S&F 4mm thick of size 600x600mm HSPC (high pressure steam cured) pre-primetred self embossed textured designer E-clasic board to be fixed to GI powder coated grid/section size 600x600with main runnder 38mm x 24mm x 0.9mm and wall angle 19mm x 0.9mm and duly suspended with 4mm dian GI bar hangers @1200mm centre to centre bothways fixed with steel dash fasteners or from purling/roof with alignment clip incl providing provn for light fixtures of any size, complete all as specified and directed. |
| 188 | S&F false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content not less than 2% humidity resistance of 99%. NRC 0.50 to 0.75 as per IS 8225: 1987, non-combustible as per BS 476 (Part-4)- 1970 and light refletance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per Sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000mm, cross- T size from 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per Sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasterners, 6 mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length-3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. The work shall be carried out as per specifications, drawing and as per directions. |
| 189 | S&F 5mm thick PVC hollow wall/ceiling paneling plain/ coloured/ printed fixed with screws to wall and corner, edges of panels be sealed with appropriate arrangement, colour and pattern as approved, complete all as specified and directed. |
| 190 | Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification given on page 162 of SSR-2010 Part-II for solid PVC wall lining including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing.complete all as specified and directed. |
| 191 | Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above the ground level) complete all as specified and directed. |
| 192 | Material and labour for 75mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth with using extra cement complete all as specified and directed. |
| 193 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof padding ,complete all as specified and directed. |
| 194 | M&L for 10mm thick screed bed or bedding layer of mortar in CM 1:4, using WPC, complete all as specified and directed . |
| 195 | M&L for painting the roof surface with a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/sq M over a coat of primer @ 0.3 litre per Sqm Complete all as specified and directed |
| 196 | M&L for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with five layer polyster non wove fabric (with Not less than 150 gms/sqm) land on bitumen coated surface by forced application, complete all as specified and directed |
| 197 | M&L for applying two coats of aluminium paint over laid APP surface after proper cleaning complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender