Tender For Supply And Construction Of 03 X Ug Bunker 20 Men At Battal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Oct 2026
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Construction Of 03 X Ug Bunker 20 Men At Battal
BOQ
| Sl. No. | Item Description |
| 1 | Supply of store at FOR, shifting of store from FOR to worksite and construction of 03 X UG 20 Men Living Bunker of size 12.32m x 5.945m x 3.00m (clear ht from FFL to celing) including Canopy as per technical specification and drg att. The details are as under :- |
| 2 | 16mm dia TMT bar MAKE : TATA STEEL/SAIL/JINDAL/RINL OR EQUIVALENT TO IS - 1786 (2008) |
| 3 | 12mm dia TMT bar MAKE : TATA STEEL/SAIL/JINDAL/RINL OR EQUIVALENT TO IS - 1786 (2008) |
| 4 | 10mm dia TMT bar MAKE : TATA STEEL/SAIL/JINDAL/RINL OR EQUIVALENT TO IS - 1786 (2008) |
| 5 | 8mm dia TMT bar MAKE : TATA STEEL/SAIL/JINDAL/RINL OR EQUIVALENT TO IS - 1786 (2008) |
| 6 | MS binding wire 0.9mm dia annealed. |
| 7 | Nails 1” and 2” mixed |
| 8 | HDPE Film (500 micron). Make: SILPAULIN/ SUPREME or equivalent |
| 9 | APP modified bitumen membrance of 3mm thickness, reinforced with polyester, laid by torch application with minimum 100mm overlaps , complete for waterprofing of roof/outer sidewall as per specification. Make : STP /Dr Fixit type /equivalent. |
| 10 | Weather coat exterior emulsion over external surfaces in approved distruptive patteren. Make : Asian/Berger/Nerolec or equivalent to IS : 15489:2004 |
| 11 | Chuna for white wash on ceiling, soffits of canopy slab etc |
| 12 | Oil Bound Distemper Ivory / White Make : Asian/Nerolac/Berger OR EQUIVALENT TO IS - 428 (2000) |
| 13 | Primer (Internal) Make Asian/Nerolac/ Berger OR EQUIVALENT TO IS - 428 (2000) |
| 14 | Primer (External) Make Asian/Nerolac/ Berger OR EQUIVALENT TO IS - 428 (2000) |
| 15 | WPC Make:-SIKA/FODROC/PIDILITE or equivalent to IS 2645-2003. |
| 16 | Prefabricated mild steel ventilator (double leaf) of size 0.60mx0.45m with shutter of 1.6mm thick MS sheet and MS angle iron chowkhat of outer frame 40x40x6mm and inner shutter frame 35x35x5mm with bracing, MS Tower bolt, MS handle, MS hinges and hold fast etc complete as shown in drawing. Guard bars of 16mm dia MS plain bar 03 Nos shall be provided on each ventilator as per diagram. Two coats of synthetic enamel paint over a coat of red oxide primer to be provided. |
| 17 | Prefabricated mild steel door (two leaf) of size 1.20x2.10m with shutter of 1.6mm thick MS Sheet and MS angle iron chowkhat of outer door frame 40x40x6mm and inner door shutter frame 35x35x6mm with bracing, locking device, hold fast, MS hinges etc complete shall be provided. Two coats of synthetic enamel paint over a coat of red oxide primer to be provided. |
| 18 | Prefabricated mild steel door (Single leaf) of size 1.20x1.95m with shutter of 1.6mm thick MS Sheet and MS angle iron chowkhat of outer door frame 40x40x6mm and inner door shutter frame 35x35x6mm with bracing, locking device, hold fast, MS hinges etc complete shall be provided. Two coats of synthetic enamel paint over a coat of red oxide primer to be provided. |
| 19 | Mild Steel Cast Iron 25mm Floor Channel Grating Size 300 x 900mm to be provided over entrance sump. ISA 50x50x5mm used for outer frame and FI 40 x 4mm to be welded to the frame @ 25mm and FI member to be interconnected at mid of each member by extra piece of FI 40 x 4mm. Welding of members to be done properly. All steel surfaces to be provided with two coat of synthetic enamel paint over a coat of red oxide. |
| 20 | Form wk to sides, soffits of slab complete for fair finished surface as required for RCC/PCC work. |
| 21 | PVC FRLS Copper Cable 1.5 Sqmm Single Core with Multi stranded, conductor 1100 volts grade confirming to IS-694, Make : KEI/Polycab/Havells |
| 22 | PVC FRLS Copper Cable 2.5 Sqmm Single Core with multi stranded, conductor 1100 volts grade in green colour for earthling confirming to IS-694, Make : KEI/Polycab/Havells |
| 23 | PVC insulated and sheathed Aluminium service cable 25 Sqmm, 2 Core, Make : KEI/Polycab/Havells |
| 24 | Caping casing 1\\" Make Berlia/Harsh/Alwyn/Plaza |
| 25 | Casing caping nail (Pkt of 100 Nos) |
| 26 | PVC Elbow for casing capping of size 1\\" Make Berlia/Harsh/Alwyn/Finolex |
| 27 | PVC Tee for casing capping of size 1\\" Make Berlia/Harsh/Alwyn/Finolex |
| 28 | Decorative type Ultra Slim Linear LED Light, environmental friendly, energy efficient LED tube light fitting 18 / 20 Watt, internally prewired including lamp 18 / 20 Watt with all fixing arrangement etc incl 6 Amp Piano switch, ceiling rose and PVC box for resting the tube lights (02 Nos for each light) All as per IS code, Make : Havells/Philips/Bajaj/Crompton |
| 29 | Exhaust fan of minimum 300 mm sweep with a 6 Amp switch 5 pin socket combination PVC board. |
| 30 | Ceiling fan 1200 mm sweep with mini fan regulator, Make : CROMPTON/USHA/ KHAITAN/ HAVELLS or Equivalent to IS 3854-1997. |
| 31 | Wall mounted Fan 450mm sweep with heavy duty wall mounting bracket, Make : CROMPTON/USHA/ KHAITAN/ HAVELLS or Equivalent . |
| 32 | LED Bulk head light 10 W with fittings. Make:- PHILIPS/HAVELLS/SYSKA or Equivalent to IS 10322 Part 5 of 2012. |
| 33 | Switch Socket combination 5 Amps 5 Pin with gang box confirming to IS-8828-1996, Make : Anchor/Havells/Crabtree |
| 34 | Switch Socket combination 15 Amps 5 Pin with gang box confirming to IS-8828-1996, Make : Anchor/Havells/Crabtree |
| 35 | PVC switch board surface mounting, size 10’’ x 8’’ with all fixing arrangement |
| 36 | Switch 5 Amp 240 Volts SP Anchor/Havells/Crabtree |
| 37 | MCB 10 Amp 240 Volts , SP confirming to IS 8828 of 1996. Make : Havells/Legrand/ABB/L&T |
| 38 | MCB 32 Amp 240 volts, DP confirming to IS 8828 of 1996, Make : Havells/Legrand/ABB/L&T |
| 39 | MCB Distribution borad Double door 8 Way complete all as specified and directed. Make : Havells/ Anchor |
| 40 | 1 HP Water Pump with suction pipe 2m and delivery pipe 50mtr and all connected accessories |
| 41 | Lightening Conductor - Lightning Conductor made of copper Tube 150cm long x 25 mm dia with five copper prongs of length 15 cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement. Bottom 40 cm portion of the copper tube will be covered with PVC insulating material to avoid direct contact between the building and the lightening conductor. GI plate of 60cm x 60cm x 3mm will be provided for earthing purpose and will be placed 2.5 m below GL. GI plate and copper conductor will be connected by using 4mm dia GI conductor wire. GI conductor wire will pass through PVC conduit pipe to avoid direct contact between building and GI wire. Necessary insulated MS clamps for fitting PVC conduit pipe with building will be provided. For effective earthing of the struck lightening, moisture near GI plate needs to be maintained. Moisture will be maintain by covering GI plate with 15cm alternative layers of 25 kg wood charcoal granules size not less than 10 mm (in HDPE bags), 25 kg edible rock salt granules (in HDPE bags) complete all as directed. Two GI funnel fixed with 20mm dia GI pipe of length 1.5 m will be provided for passing GI conductor wire and supplying water at 2.5 m depth. Man hole will be covered by using PVC cover of size 45cm x 45cm over PCC pit. 15 cm long Termination point Aluminum strip of size 25mm x 3mm having holes at both ends for fixing GI conductor wire coming from copper tube and GI plate with suitable nuts and bolts, will be provided at plinth level to check the resistance of the earthing. Schematic layout of lightening conductors will be as per engineering practice. |
| 42 | Earthing of building will be provided using 4mm dia GI Set earth wire connecting to main board to GI earth plate of size 60cmx60cmx6mm thick, 300x300mm PCC pit, CI cover of size 45cmx45cm, GI funnel, GI tube 20mm 1.50 m long, termination point, 15 cm alternative layers of 25 kg wood charcoal granules size not less than 10 mm (in HDPE bags), 25 kg edible rock salt granules (in HDPE bags) complete.(a) GI earthing plate 600x600x6mm thick with 10 mm dia, 25 mm long 02 Nos nut & bolts. - 1 Set(b) Rock Salt granules - 25 Kg(c) Wood charcoal granules size not less than 10 mm -25 Kg(d) GI wire 4mm (8 SWG) -5 Kg(e) CI cover 5mm thick (450 x 450 mm size) hinged to CI frame -1 No(f) GI funnel with wire mesh -1(g) AI strip 25 x 3mm -10 Mtr(h) GI strip 25x3mm - 10 Mtr(j) Screw Steel Full threaded 25mm (Pkt of 100 Nos) -1(k) Screw Steel Full threaded 32 mm (Pkt of 100 Nos)-1(l)Screw Steel Full threaded 40mm (Pkt of 100 Nos)-1(m) GI Pipe 20mm dia 6' Long Light grade (Make :JINDAL/TATA). -2 Nos(n) GI Pipe 50mm dia 6' Long medium grade (Make:JINDAL/TATA). -2 Nos |
| 43 | MS Double bunk bed. Steel double bunk made of 32 mm NB (M) MS tube frame, both bed frame of size 1890mm x 900mm made of ISA of size 35mm x 35mm x 5mm and height between the bunk is 1000mm. Bed frame to be fix with 12mm dia by welding, a support of MS flat 25x4mm to be provided at each junction of bed top and MS tube frame with the help of 6mm dia bolt. 02 Nos small lockers of size 450mmx300mm made of MS sheet of 0.06mm attached to bunk (as per design). 90mm dia 6mm thick MS plate to be provided with each leg of bed at bottom. Suitable size of ladders to be provided with bunk. 12 mm thick plywood with cushion of size 1880mm x 890mm having density of 36 kg/cum covered including good quality of cushion not less than 75 mm thick covered with good quality 350 gsm tarpaulin cover in OG colour. Make - KITPLY/GREENPLY/NATIONAL or Equivalent to IS 303: 1975 |
| 44 | Cement of 43 grade confirming to IS 8112/1989 in sealed bags each weighting 50 Kgs. The date of manufacture of cement should not be more than one month prior to the date of delivery. Make ACC/Ambuja/Ultratech cement/Birla Cement. |
| 45 | Crushed stone aggregate 20mm confirming to IS 383-1970. |
| 46 | Crushed stone aggregate 40mm confirming to IS 383-1970. |
| 47 | Fine aggregate Sand coarse as per IS-383-1970. |
| 48 | Cement concrete solid bricks of size 9” x 4.5” x3” casted in mix design M-15 confirming to IS 2185-2005. |
| 49 | Hardcore (40 to 63mm broken boulder stone confirming to IS-383-1970). |
| 50 | Transportion, Shifting of store from FOR to worksite Labour charge, Tools & Plants and other misc charges complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender