Tender For Repairs/Maint To Floor, Wall, Ceiling, Toilets, Fencing, Footpath And Other B/R Allied Works Of E/M Installations At Dlrl And Drdl Hyderabad
Tender Value
30 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
20 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/Maint To Floor, Wall, Ceiling, Toilets, Fencing, Footpath And Other B/R Allied Works Of E/M Installations At Dlrl And Drdl Hyderabad
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding /backing coat and removing rubbish off the premises, complete all as directed. |
| 2 | Demolition of cement concrete of any description not otherwise specifically provided for as in floor/foundation etc., complete all as directed. |
| 3 | Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles |
| 4 | Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed by Engineer-in-Charge. |
| 5 | Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed by Engineer –In -Charge. |
| 6 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for factory made flush shutters, 35mm thick solid core construction, with block board core and plywood face panels, with 0.90mm thick decorative laminate type-1, commercial type on other sides of surface finish, colour as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for 35mm thick factory made glazed and skeleton shutters,2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed by Engineer-in-Charge. |
| 10 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories wih multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 4.8 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent complete incl taking down old window complete all as specified. all as directed. |
| 11 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 12 | M&L brick work with sub class 'B' bricks (with old size bricks) straight or curved on plan exc 6.00m mean radious, built in CM (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick built in CM 1:6. |
| 14 | M&L for walling of random rubble masonary Secunderabad type, well bedded, bonded and solidly hearted built in CM (1:4) ,complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in flooring, foundation and mass filling, complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L PCC 1:2:4 type B-0 (using 12.5 mm grade stone agg)concrete 25 mm thick as floor even and fair to receive top layer complete all as specified and directed |
| 17 | M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 100mm thick finished even & smooth w/out using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to matchto complete all as specified and as directed. |
| 19 | M & L for vitrified ceramic tiles light shade 09-10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge |
| 20 | M & L for coloured glazed ceramic tiles of size 350x250x7mm /450 x 300 x 7 mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, complete all as specified and as directed. |
| 21 | Rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces to back of tiles |
| 22 | Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes |
| 23 | M & L for 18 to 20 mm thick granite (of any type) machine cut in floor/platform/tread, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including griding and polishing types over screedbed complete all as specified and as directed. |
| 24 | M & L for 18 to 20 mm thick granite (of any type) machine cut in skirting/dado/riser, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including griding and polishing types over screedbed complete all as specified and as directed. |
| 25 | M & L Rounding to edges of granite stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed |
| 26 | M&L for 100 mm thick Cement Concrete (1:3:6) Type C2 (40mm Graded Stone Aggregate) as in Plinth protection , etc., finishing the cement concrete surface even and smooth without using extra cement, including Use and Waste of necessary Form Work, complete all as specified and directed by Engineer-in-Charge. |
| 27 | Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s),complete all as specified and directed by Engineer-in-Charge. |
| 28 | M&L 15 mm thick rendering in cm 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 29 | M&L Rendering 15mm thick in CM 1:6 on brick or concrete surfaces finished even and smooth without using extra cement. |
| 30 | Supply and fix 16 mm dia CPVC pipes 11 SDR & plain CPVC 11 SDR fittings, fixed on wall concealed or exposed /ceiling or laying in floors including taking up or down steel tubing all as specified and as directed by Engineer-in-Charge. Make : Astral/Finolex/Prince etc |
| 31 | Supply and fix 20 mm dia SDR 11 CPVC pipes & plain CPVC SDR 11 fittings, fixed on wall concealed or exposed /ceiling or laying in floors including taking up or down steel tubing all as specified and as directed by Engineer-in-Charge. Make : Astral/Finolex/Prince etc |
| 32 | S&F in repairs 40mm dia GI medium grade pipe as in spouts 45cm long including making in holes in RCC and making good in cement mortar 1:1/PCC 1:2:4 complete all as directed by Engr-in-charge. |
| 33 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) tripple layered 1000 ltr capacity ISI mark, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed by Engineer-in-Charge. |
| 34 | S & F in repair ball valves, PTMT epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 25 mm bore complete all as directed by Engineer-in-Charge. |
| 35 | S & F PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors including taking down old pipe complete all as directed. |
| 36 | S & F PVC (SWR) bends (any radius) suitable for 110mm bore pipe complete all as directed |
| 37 | S & F in repairs PVC (SWR) pipes 160mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as directed by Engineer -in-Charge. |
| 38 | S & F in repairs PVC (SWR) bends (any radius) suitable for 160 mm bore pipe complete all as directed by Engineer -in-Charge. |
| 39 | M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping and applying one coat of oil emulsion distemper complete all as directed. |
| 40 | M&L for preparation of old surfaces of walls by washing, rubbing down and stopping and applying one coat of weather proof antifungal exterior paint complete all as directed. |
| 41 | M & L for Preparation of new plastered surfaces and applying two coats of weather proof antifungal Acrylic Exterior emulsion paint of Apex Ultima and shade over a coat of approved primer as recommended by the manufacturer over a coat of putty to make surfaces smooth all as required and as directed. |
| 42 | M&L for Preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls over a coat of wall putty to make surfaces smooth. |
| 43 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 44 | Excavating in post holes (or similar holes) each n.exc 0.5 Cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 mtr and making good surfaces in soft/disintengratednrock complete all as specified and directed. |
| 45 | S & F for GI posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 46 | M&L Cement concrete type -D2 1:4:8 40mm graded stone aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed. |
| 47 | S&F PVC coated chain link fencing 50mmx50mmx4mm thick mesh secured with MS flats, straining bolts including provision of binding wire complete as specified and directed. (Note : straining bolts, nuts and washers , flat iron and 10mm dia round bars shall be, measured and paid separately) including dismantling of old damaged existing fencing complete all as specified and as directed. |
| 48 | S&F framed work such as grills, framed guards bars and similar work conforming to 290 Gde F-165 complete all as specified & directed by Engr-in-Charge |
| 49 | S & F Machine pressed precast concrete interlocking paver block any shape and size with gray cement and pigment (approved by GE) confirming to IS 15658-2006 of 60 mm thickness, M-35 grade including laid over , 40mm sand cushion bed and preparing the surface to uniform level to receive tiles and the corners shall be finished with 1:2:4 PCC (using 20 mm graded stone aggregate) finished the surface even and smooth including taking down old unserviceable tiles and depositing debries in low laying areas upto a lead of 500 mtrs complete all as specified and as directed by Engr-in-Charge.(Note : Sand will be paid separately) |
| 50 | M/L Sand filling under floors |
| 51 | Dismantling of existing AC (corrugated, semi corrugated etc) roof covering sheet complete all as specified and directed. |
| 52 | M&L Pre painted galvalume aluminium zinc coating GI based corrugated /trepezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 53 | Demolition of cement concrete in any position incl removal of any type of old treatment, tarfelt & debries etc complete all as specified & directed by Engr-in-Charge. |
| 54 | M&L for 40mm thick PCC type B0, 1:2:4 (using 12.5 mm graded aggregate) as in padding in roof complete all as specified. |
| 55 | M&L for cement screed/rendering 10mm thick in C.M (1:3) over roof slab including parapets inverted beams etc. mixed with water proofing compound, rendering all as specified and directed (WPC shall be measured and paid separately and finished even and smooth without using extra cement complete all as directed by engr-in- charge. Note:- WPC will be measured & paid separately. |
| 56 | M&L for APP based polymeric membrane minimum weighing 3Kgs/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) over a coat of hot bitumen 85/25 grade applied @ 1.20 Kg/Sqm after priming the surface with bitumenious emulsion (tack coat) @ 100 gms/sqm with 10 cm overlap of the membrane to be provided duly fused uniformly by LPG torch flame complete all as directed . |
| 57 | M&L for preparation of surface and applying one coat of aluminium paint @ 100 ml/sqm over APP membrane all as specified and directed. |
| 58 | Supply only liquid water proofing compound. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender