Tender For special Repair Of Govt Md Accn To Bldg No P-137 At Jungle Area Of 614 Eme Bn Under Ge, Clement Town.
Tender Value
33.50 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
17 days left
EMD
67000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Govt Md Accn To Bldg No P-137 At Jungle Area Of 614 Eme Bn Under Ge, Clement Town.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed |
| 2 | M&L for brick work except bricks sub class B old size bricks straight or curved plan exc 6m mean radius built in cm 1:6 including Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etccomplete all as specified. |
| 3 | M&L for 75mm thick PCC 1:3:6 type C2 (Using 20mm graded stone aggregate) as in plinth protection/path/hard standing laid in panels, finish the top surfaces even and smooth including demolition of PCC of any description, in any position etc complete all as specified and directed |
| 4 | M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement including Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified |
| 5 | M&L for preparation of newly plastered surface of wall and applying two coats of internal acrylic distemper including a coat of primer of approved tint over a coat of wall care putty complete all as specified and directed |
| 6 | M&L for applying two coat of internal acrylic distemper of approved tint over a coat of wall care putty on walls after complete removal of existing treatment and preparation of old plastered surface by rubbing down, washing complete all as specified and directed |
| 7 | M&L for 15mm thick plaster in CM 1:4 on fair face of brickconcrete surface or walls finished even and smooth without using extra cement including Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified |
| 8 | M&L for applying two coats of acrylic exterior emulsion paint (Apex) over a coat of primer after preparation of newly plastered/concrete surfaces on wall complete all as specified |
| 9 | M&L for applying two coats of weather proof exterior emulsion paint (Apex) after complete removal of existing treatment including preparation of old plastered/concrete surfaces on wall complete all as specified |
| 10 | M&L for one coats of white wash to old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed |
| 11 | M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab, chajjas, parapets etc and shelves supported on walls including Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed |
| 12 | M&L form work to soffits of suspended slab such as roof slab , chajjas , Parapet , facia and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and directed |
| 13 | M&L for mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 14 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete and making good to disturbed portion to match the existing surface all as specified and directed |
| 15 | Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) and making good to disturbed portion to match the existing surface complete all as specified and directed |
| 16 | M& L Solid (100 mm X 63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed. |
| 17 | M& L Solid (125mm X 63 mm Double rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed. |
| 18 | S&f factory made single extruded WPC (wood polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K valve 58-60 (Suspension Grade ) , calcium carbonate and natural fibers (wood powder/rice husk, wheat husk ) and non toxic additives (maximum toxicity index of 12 of 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer-in-Charge. |
| 19 | S&F 35 mm thick factory made wire mesh solid WPC Prelaminated both side door shutter consisting of Density 650 kg/cum manufactured by an ISO 9001-2015 certified company . Door to be panelled with SS mosquito Mesh and XTN aluminium mesh for additional strength and safety purpose (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos MS powder coated butt hinges size 100x 25x2mm and 32 mm long steel screw drilled suitable to pass through both the walls of the MS tube. Other hardware should be fixed with 19x 6 mm size steel screws etc complete all as per directions of Engr-in-Charge , manufacturer's specification and drawing complete all as specified and directed. |
| 20 | S&F Windows made fabricated from roll formed sections made of galvanised steel Colour coated/powder coated (Base steel as per IS 513 of “D” Quality galvanized as per IS 277 with zinc of 120 GSM/sqm wirh coated thickness of 0.60 mm) and Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer or powder coated with pure polyster powder up to 50-60 microns thick.Section for outer frame should be of 98x50mm, centre mullion should be of 46x70mm, section for fixed glass beading should be of 18x25mm and section for shutter should be of 46x46 mm. Section for Fly mesh shutter section should be of 20x40mm. Frame and Mesh shutter Sections are to be cut to length mitre joined with corner bracket made of Polypropylene . Glass shutter with mitred joint with corner brackets made of CRCA eletroplated. Mullion section should be joined with frame using Nylon Cap Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter between frame and glazed shutter and both sides of fixed glass. Spoon profile should be used around Fly mesh to fixed in Mesh shutter. Each shutter should be provided with SS Pivot Hinges-1 set, Handle shall be provided per shutter.Window frame should be fixed to bricl/concrete masonry by using Nylin self-expanding caps and driving MS electroplated 80 mm long screws into caps through frames.The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter with 0.32 Guage fly mesh of 304 grades with 144 holes per square inch.Windows should be provided with grill made of 110 mm Centre to centre, 6mmx12mm MS Flat.Total grill unit should be powder coated and fixed to window frame with screws complete all as specified and directed. |
| 21 | M&L for Non Skid coloured ceramic tiles 8-9mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 including Dismantling of tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 22 | M&L for Non Skid coloured ceramic tiles 8-9mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles including Dismantling of tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 23 | M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm (400x400mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete including Dismantling of tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 24 | M&L for coloured Glazed ceramic tiles in vertical surfaces 300x450x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:4 including, Dismantling of tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 25 | M&L Baroda green marble 14 -16 mm thick (table rubbed and polished) in step, jambs, pillars , window cills, cooking plateforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM 1:6 including dismantling and complete all as specified and directed |
| 26 | M&L for Machine cut Kota stone slab flooring 16-20 mm thick, laid over & including screed bed of 20 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing including dismantling old complete all as specified and directed |
| 27 | M&L for Kota stone slab 16-20 mm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling old complete all as specified and directed. |
| 28 | S&F in repair rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed |
| 29 | S&F 250mm stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate |
| 30 | S&F 100mm size stainless steel butt hinges medium weight ISI marked, cold rolled |
| 31 | S&F 200mm long stainless steel barrel tower bolts all as specified |
| 32 | S&F 150mm size stainless steel handles all as specified |
| 33 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 34 | M&L 110mm dia PVC pipe soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches including dismantling old complete all as specified and directed |
| 35 | M&L 75mm dia PVC soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches including dismantling old complete all as specified and directed |
| 36 | S&F 75 mm floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 37 | S&F in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed. |
| 38 | S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed. |
| 39 | S&F in repair PVC (SWR) Single T 100mm dia, equal or unequal as required and jointed with approved adhesive complete all as specified and directed |
| 40 | S&F in repair PVC (SWR) Single T , 75mm dia, equal or unequal as required and jointed with approved adhesive complete all as specified and directed |
| 41 | S&F PVC cowls 75mm complete all as specified and directed. |
| 42 | S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified |
| 43 | S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified |
| 44 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed. |
| 45 | S&F in repair 600x450x5mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specified |
| 46 | S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified. |
| 47 | S&F in repair 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified. |
| 48 | S&F in repair 15mm Stop valve angle cock fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified |
| 49 | S&F in repair chromium plated brass shower roses with or without swivel joints 125mm size including shower arm complete all as specified |
| 50 | S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified |
| 51 | S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed. |
| 52 | S&F in repair 20 mm dia brass CP tubular towel rail D type 600mm long complete all as specified and directed. |
| 53 | S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface including Taking up or down 15mm dia steel tubing complete in all respect as specified |
| 54 | S&F in repair 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified |
| 55 | S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface including taking up or down 20mm dia steel tubing complete in all respect as specified |
| 56 | S&F in repair 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified |
| 57 | S&F in repair of 20mm dia SS drapery rod, fancy type, SS knobs and brackets, fixed in any length complete all as specified and directed |
| 58 | M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping, edging including necessary form work complete all as specified |
| 59 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed |
| 60 | M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed |
| 61 | Removal of existing roof treatment i.e APP membrane including plaster, PCC padding, brick tiling incl mud mortar and open up RCC roof slab including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance, scales, oil or any other loose material complete all as specified and directed.Note:- The work is required to be carried out at non-accessible roof for double storey .The contractor shall make arrangement of scoffolding,safety & security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items |
| 62 | M & L of water proofing treatment to roof slab with APP based modified polymeric membrane incl 40mm thick PCC padding as per manufacturer’s instructions with following course of description below :-(a) 50 mm +/- 2.5 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) mixed withliquid water proofing compound (as per manufacture direction and paid separately) over and incl one coat of cement slurry admixed with acrylic bonding compound SBR Latex liquid polymer as to be used for bonding of new concrete / mortar to old surface as per manufacturer direction and finishing the surface even and fair (without using extra cement) as in roof padding to receive roof treatment(b) Applying a priming coat of bituminious primer @ 0.30 Kg /Sqm, till the surface is properly impregnated.(c) Providing APP based 5 layer polymeric membrane minimum weighing 3.6Kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core, laid on primed surface by forced applications as per the manufacturer's instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch ) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer.(d) Apply two coat of bituminous aluminium paint @ 0.20 Kg / Sqm each coat over APP membranceNote :1. The work of water proofing treatment shall be got executed through authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contractor2. The work is required to be carried out at accessible roof slab for double storeyed. The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items.) |
| 63 | Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed. |
| 64 | Taking down submain/ service / UG cable on wall/ trenches/ roof/ floor etccomplete all as specified and directed. |
| 65 | Dismantling and taking down carefully existing DB’s & DB Enclosurs of any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified |
| 66 | M&L Point wiring with 1.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including concealed rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases , making surface good etc along with contineous earth wire 1.5 Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly including metal flush box with white cover plate & frame for modular switch & socket complete with all accessories complete all as specified & directed for the following:-(a) One light/fan/bell/exhaust fan point controlled by one, 01-way modular type switch 5/6 Amp. |
| 67 | All as per Item No 66 above but on the same board with other switches/sockets |
| 68 | All as per Item No 67 above but for One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, 01-way modular type switch single pole 5/6 Amps. |
| 69 | All as per item No 67 above but one light point controlled by two, 02-way point wiring with two no of two way switch with cables 1.5 sqmm size in PVC conduit |
| 70 | M&L Point wiring with 2.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including concealed rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases and making surface good etc along with contineous earth wire 2.5Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly, including metal flush box with white cover plate & frame for modular switch & socket complete with all accessories. (a) one three pin 15 Amps Switch Socket outlet on independent board |
| 71 | Supply and fixing modular switch type 1 way 06 Amp, 1 Module, 240 Volts AC , |
| 72 | Supply and fixing modular switch type 1 way 16 Amp, 1 Module, 240 Volts AC. |
| 73 | Supply and fixing modular bell push 1 way 06 Amp, 1 Module type all as specified. |
| 74 | Supply and fixing modular switch type 2 way 06 Amp, 1 Module, 240 Volts AC. |
| 75 | Supply and fixing modular socket 06 Amp 3 pin combined, 2 module all as specified. |
| 76 | Supply and fixing modular socket 06/16 Amp combined, 2 module all as specified. |
| 77 | S&F bell ding dong elelctric 230V AC single pole all as speccified and directed |
| 78 | S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body ISI marked all as specified and directed |
| 79 | Supply and fixing batton holder ISI Marked mounted on wall including 09 Watt LED Bulb all as specified and directed. |
| 80 | Supply and fixing ceiling fans complete with blades, down rods and electronic regulator accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00, BEE Five star rated with brushless direct current motor (BLDC) including provision of cable flexible 3 core of suitable size wire from ceiling rose to Ceiling Fan complete all as specified and directed. |
| 81 | S&F LED tube light batten 20 watts 4 fts polycarbonate housing, translucent diffuser with LED light source , 2200 lumen, natural white ,surge protection range 2KV, voltage protection range 120-280 VAC , 2 years warranty ,system efficacy not less than 110 Lm/watt for the fitting , power factor>0.95 total harmonic distortation<20% , colour rendering index >80, coefficient colour temp 6500 K, fixed on site with all accessories all as specified and directed. |
| 82 | S& F in repair oval shape Bulk head Edge-lit LED fitting comprising with high brightness LED 10 watt, IP-67 protection all as specified and directed. |
| 83 | S& F Glaze Wall Light including 7/9 watt LED ( B22) type all as specified and directed |
| 84 | S& F Mirror Light LED fitting 10 Watt fitting (2 feet) complete all as specified and as directed. |
| 85 | M & L for LED Bldg Security light Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 86 | Supply, fabricated and and fixing of street light bracket made out of GI pipe 1.0 Mtr long, 32 mm dia medium grade bent to shape as directed including clamps made out of 40 mm x 6 mm flat for fixing bracket suitable for steel tubular poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer all as specified and as directed. |
| 87 | S& F double door sheet metal enclosure for DB , 08 way , SPN, with 200 Amps rated bus bar , 240 Volts suitable for housing MCBs and flushed inside the wall and making good for disturbed surface with existing etc complete all as specified & directed. Please Enable Macros to View BoQ information |
| 88 | S& F double door sheet metal enclosure for DB , 08 way , SPN, with 200 Amps rated bus bar , 240 Volts suitable for housing MCBs and flushed inside the wall and making good for disturbed surface with existing etc complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender