Tender For Additional Construction At House No. 504 Type V, Judge House, Sector 16 (Public Health Services Other Allied Works) Under Phs maintenance Booth Sector 16, Chandigarh. . (Ch:To:2216 maintenance And Repair (Np)).
Tender Value
3.68 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
5 days left
EMD
7370
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional Construction At House No. 504 Type V, Judge House, Sector 16 (Public Health Services Other Allied Works) Under Phs maintenance Booth Sector 16, Chandigarh. . (Ch:To:2216 maintenance And Repair (Np)).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. DSR 4.1 |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). DSR 4.1.3 |
| 3 | Brick work with common burnt clay F.P.S. (non plinth level up to floor V level in all shapes and sizes in : DSR 6.1 |
| 4 | Cement mortar 1:6 (1 cement : 6 coarse sand). DSR 6.1.2 |
| 5 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. DSR 10.25 |
| 6 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. DSR 10.25.2 |
| 7 | 12 mm cement plaster finished with a floating coat of neat cement of mix : DSR 13.7 |
| 8 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 13.7.2 |
| 9 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7 |
| 10 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. DSR 17.7.2 |
| 11 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16A |
| 12 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28 |
| 13 | Flexible pipe. DSR 17.28.2 |
| 14 | 32 mm dia DSR 17.28.2.1 |
| 15 | Providing and fixing soil, waste and vent pipes. DSR 17.35 |
| 16 | 100 mm dia. DSR 17.35.1 |
| 17 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 39899. DSR 17.35.1.2 |
| 18 | 75mm dia. DSR 17.35.2 |
| 19 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989. DSR 17.35.2.2 |
| 20 | Providing and fixing collar : DSR 17.57 |
| 21 | 100 mm. DSR 17.57.1 |
| 22 | Sand cast iron S&S as per IS - 3989. DSR 17.57.1.2 |
| 23 | 75mm . DSR 17.57.2 |
| 24 | Sand cast iron S&S as per IS - 3989 DSR 17.57.2.2 |
| 25 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors. DSR 17.60 |
| 26 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 27 | Sand Cast Iron S&S as per IS- 3989 DSR17.60.2.1 |
| 28 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. : DSR 18.10 |
| 29 | Internal Work - Exposed on Wall |
| 30 | 20 mm dia. nominal bore : DSR 18.10.2 |
| 31 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : DSR 18.11 |
| 32 | 15 mm dia nominal bore DSR 18.11.1 |
| 33 | 20 mm dia nominal bore. DSR 18.11.2 |
| 34 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): DSR 18.17 |
| 35 | 25 mm nominal bore DSR 18.17.1 |
| 36 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18 |
| 37 | 20 mm DSR 18.18.2 |
| 38 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 39 | 45 cm length. DSR 18.21.2 |
| 40 | 15 mm nominal bore DSR 18.21.2.1 |
| 41 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 42 | 15 mm nominal bore : DSR 18.46.1 |
| 43 | 20 mm nominal bore : DSR 18.46.2 |
| 44 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 45 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51 |
| 46 | 15 mm nominal bore. DSR 18.51.1 |
| 47 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 DSR 18.53 |
| 48 | 15mm nominal bore DSR 18.53.1 |
| 49 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. DSR 18.53A |
| 50 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 51 | With common burnt clay F.P.S. (non modular) bricks : DSR 18.76.1 |
| 52 | Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen Sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required of Size 27\\" x 21\\" x 8\\" of approved make |
| 53 | Providing and fixing of Chinaware Wall Hung Wash Basin with full Pedestal including CI/MS Brackets, cutting, painting of brackets and making good the walls etc Size 630 x 450 mm , Make CERA Basin CONCORD |
| 54 | Providing and fixing of overhead shower 200X200 mm square shape single flow with arm dia 20 mm and 450 mm long round shape , make Jaquar OHS 1619 & SHA-479L450 |
| 55 | Providing and fixing concealed cistern & Control plate Make Jaquar Model JCS-2400S & JCP 392415 or equivalent |
| 56 | Providing & Fixing Table Top Wash Basin Size 500 x 420 x 200 mm Make Jaquar model Fonte FNS-WHT-40931 complete with CP Waste or or approved make to the satisfaction of EIC |
| 57 | Providing and fixing of C.P. Towel Ring Square with round flange complete, make Jaquar range Continental Model ACN-1121N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 58 | Providing and fixing of C.P. Soap Dishmaker Jaquar/Continental CAN-1131N or equivalent Model or other approved makes in the same range of AOR to the satisfaction of EIC |
| 59 | Providing anf fixing of CP cup heavy duty complete in all respect as per entire satisfaction and approval of make by EIC. |
| 60 | Providing and fixing mirror ofsuperiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats steel studs complete in all respect |
| 61 | Provd & fixing of C.P. Towel Rail 450 mm long make Jaquar Continental Model ACN-1111BNM or equivalent model of other approved makes in the to the same range of AOR satisfaction of EIC |
| 62 | Providing & fixing Hand Shower (Health Faucet) (ABS Body) with 8mm Dia 1.2 Meter Long Easy Flexible Tube and Wall Hook Finish Chrome complete in all respects Make Jaquar Model ALD-CHR-573 or equivalent in the same range of AOR |
| 63 | Providing and fixing of Hand shower Round Shape ( ABS body Chrome Plated with Gray Face Plate ) with Rubit Cleaning System make Jaquar Model |
| 64 | 80 mm dia / HSH 1937 or equivalent in the same range of AOR |
| 65 | Providing and fixing of CP toilet paper holder make Jaquar Continental Model ACN 1151 N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 66 | Providing and fixing of Glass corner self make Jaquar Continental Model ACN- 1173 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 67 | Providing and fixing of CP towel rack with lower hangers make Jaquar Continental Model ACN- 1181 N complete or equivalent model of other approved makes in the same range of AOR to the satisfaction of EICsingle lever! |
| 68 | Providing and fixing of single level basin mixture without pop up waste system with 450 mm long braid complete make Jaquare OPAL PRIME or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 69 | P/F of chinaware wall mounted/wall hanging Eurpeon Style W.C. 360MM x580mmx360mm of make ( JAQUAR) approved colour with all other fittings i.e seatcover Jaquar ARIA or equivalent model of other approved makes in the same range of Aor to the satisfaction of EIC |
| 70 | Providing and fixing Bib Cock Make Jaquar Range Opal prime Model OPP-CHR-15037PM complete in all respect NSR |
| 71 | Providing and fixing of Anglular stop cock, With Wall Flange, Make Jaquar range Floratine Model FLR- 5053PM or equivalent model of approved make to the satisfaction of EIC |
| 72 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" dia of approved make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender