Tender For Work Of Supply/Installation Of 34 Nos. 100-130 Watt 7 Meter High Led Street Lights, Wires, Clamps, Gi Maquet Pipes, Aluminum Un-Armored Cables Etc. At Various Places In Nagar Panchayat Achhalda.
Tender Value
24.88 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
20 days left
EMD
50000
Bank guarantee accepted
Document Fee
2938
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Auraiya → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Work Of Supply/Installation Of 34 Nos. 100-130 Watt 7 Meter High Led Street Lights, Wires, Clamps, Gi Maquet Pipes, Aluminum Un-Armored Cables Etc. At Various Places In Nagar Panchayat Achhalda.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & fixing steel tubular pole 7 Metre long designated 410 SP-3 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. (SI No 21.2.1) |
| 2 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 100 to 130 Watt. Confirming to IP 66 protection complete in allrespect. CAT- AAA (PWD Electrical 23.24) |
| 3 | S/Burying of 40 mm dia x4.5 meater long GI Pipe vertically for earthing having 12 mm dia Holes spaced 75 mm apart drilled up to 2 meater from the bottom complete with earthing lead of 6 to 8 SWG GI wire in GI pipe up to apron (and from apron to swich board the cost of GI wire and pipe will be extra) upto switch board , 30 cm square CI boxwith hinged cover masonary enclose, funnel at top ,alternate laye4rs of charcoal/coke and salt at least 150 mm thick alround etc.as per directions of Engineer – in – charge complete in all respect as per drawing. (SI No 5.2) |
| 4 | Supply/Fixing of one number 8 SWG GI wire in 15mm dia GI pipe for earthing laid in ground or in wall dully concealed including the cost of cement ,saind ,labour, T&P other material required for proper composition of work as directed at site. (SI No 721) |
| 5 | S/Wiring of sub mains of 2no , 1.5 sq mminsulated multistoried copper wire in existing in pole complete withsupply all material complete in all respect. (SI No 1308©) |
| 6 | S/Fixing of 32 Amp 415 v metal clad TPN rewirable typeswitch fuse unite angle iron bracket with nut &bolts clampscompleate in all respect . |
| 7 | Supply/Fixing feeder panel fabricating wiring of sheet metal box size450mmx450mmx150mm with locking arrangement & rubber packing co0nnecting TPN aluminium bushahbar 32 Amp TPN MCB 10Amp.TPN MCB 2No with contractor strip3Nos with indicating lamps wire & lags nut 7 bolts holding clamps & including foundation complete in all respect.(UP PWD ELECTRICAL SOR 807(e)(ii)) |
| 8 | Supply/ Fixing of 6 Amp DPMCBaproved make(10KA) SINo 1009(A) |
| 9 | Supply/Fixing 50mm dia MS GI Pipe |
| 10 | Supply /Laying of 16 sq mm 4core alluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top .On surface the cable run shall be fixed on MS clamps etcof suitable size or as directed by the, Engineer Incharge complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (SI No 20a 1.8 PWD Electrical) |
| 11 | Supply/Fixing of cable lug pin type copper tin plated cable socket to the cable leads, insulating with tape and making connection etc . complete in all respect as per direction of theEngineer Incharge.16sq mm 4core (SI No 504(D)) |
| 12 | Cutting & Moling of road for cables passing in 50mm dia |
| 13 | Supply/Fixing of cable lug pin type copper tin plated cable socket to the cable leads, insulating with tape and making connection etc . complete in all respect as per direction of theEngineer Incharge.6sq mm 4core (SI No 504(B)) |
| 14 | Supply & Fixing of 5A to 32A Rating double pole 240/415V 10Ka , ''C'' curce miniature circuit breaker suitable for inductive load of double pole in the existing MCB DBComplete ( SI No 2.10.3) |
| 15 | Latering/Counting of numberingof poles with radium latterwriting with complete in all respect as per direction of the Engineer Incharge.16sq mm 4core Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender