Tender For Modification And Upgradation Of Gate No 1 And Gate No 3 At Csir-Ngri Hyderabad.
Tender Value
75.11 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
6 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Modification And Upgradation Of Gate No 1 And Gate No 3 At Csir-Ngri Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Description of Items : |
| 2 | Part A- Civil Work-Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth,1.5m width as well as 10 sqm on plan) including disposal of excavated earth, all lead and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil |
| 3 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. |
| 4 | Providng and laying in position cement concrete of specified grade including the cost of centring and shuttering to complete the job as per instructions of Engineer-In-Charge- All works upto plinth level. 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M30 grade with a minimum cement content of 440 kg /cum |
| 6 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; butm excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 7 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand) |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete at all height. |
| 9 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level to complete the job as per Instructions of Engineer-In-Charge. Thermo-Mechanically Treated bars of grade HYSD Fe-500D or more. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns using steel boxes and pipes , slab, sunshade etc. |
| 12 | Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ( including Single / double glass panes and silicon sealant). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Fixed window / ventilator without mullion / transom. Using R1 series with frame (33 mm & above) x (35 mm & above). (Height upto 0.90 metre) |
| 13 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) |
| 14 | Wall painting with premium plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coat over the one coat of cment primer. |
| 15 | Finishing walls with textured exterior paint of required shade. M/S Asian Paints or equivalent. New work (Two or more coats applied @ 3.28 ltr/10 sqm) over water profing cement paint applied @ 2.20 kg/10 sqm) |
| 16 | Providing and fixing of pre tensile structure including A) Design & Engineering: Complete structural design, pattern generation, and fabric cutting precision. B) Fabrication: Shop fabrication of Mild Steel (MS) framework, gusset plates, and base plates. C) Surface Treatment: One coat of zinc-chromate primer followed by two coats of protective Epoxy paint. D) Fabric Processing: High-Frequency (HF) welding of fabric panels for watertight, high-strength seams on 20KW Australian Machine. E) Installation: Supply and fixing of the fabricated MS frame, tensile fabric 750 GSM PVDF Tensile membrane fabric, and heavy-duty foundation bolts. F) Canopy of 9 x 9 feet x 9 feet height. |
| 17 | Providing and fixing Light Diffusing Acrylic Sheets of approved quality and thickness (3–5 mm) and Light Transmission 85%, cut to size and shape, fixed at a height of approximately 25 ft in MS frame and RCC structure. The MS frame shall be paid separately under relevant item, and RCC structure shall be included in the main item. The work includes cutting, edge finishing, handling, lifting, fixing with stainless steel bolts/clamps/fasteners, scaffolding arrangements, cleaning, and finishing complete as directed by the Engineer‑in‑Charge. |
| 18 | Labour charges for carefully removing of the gate and its parts etc without damage/bending, reusing the same the gate . The rate includes removal and re‑fixing for the sliding gate, with all necessary cutting, welding, and related works required to complete the job in all respects. |
| 19 | Supply, Installation, Testing & Commissioning of Automatic Sliding Gate System Description: Motor: Heavy-duty 230 V, AC motor, three-phase, with minimum weight-handling capacity of 2500 kg or more per motor. Gear Track: High-strength steel gear track, corrosion-resistant, suitable for continuous operation. Sensors: Stop sensors for safety during crossing, reventing accidental closure.(photo cell sensors required nos as per site and remote two nos Control Unit: Microprocessor-based control panel with adjustable speed, sensitivity, and safety features. Weather Protection: Entire system shall be all-weather proof, dust and rain resistant, suitable for outdoor installation.cabling, Documentation: manufacturer’s compliance certificate, operation & maintenance manual, and written warranty confirmation. Future Integration: Provision for integration with access control systems (RFID/biometric). foundation bolts, brackets, and installation hardware. Emergency Release: Manual override mechanism in case of power failure. Warranty & Maintenance: Minimum 2-year warranty with written confirmation, including post-warranty maintenance support. Approved Make: FAAC or equivalent, subject to approval by Engineer-in-Charge. Accessories: All necessary Please Enable Macros to View BoQ information |
| 20 | Supply, Installation, Testing & Commissioning of Automatic Sliding Gate System Description: Motor: Heavy-duty 230 V, AC motor, three-phase, with minimum weight-handling capacity of 2500 kg or more per motor. Gear Track: High-strength steel gear track, corrosion-resistant, suitable for continuous operation. Sensors: Stop sensors for safety during crossing, reventing accidental closure.(photo cell sensors required nos as per site and remote two nos Control Unit: Microprocessor-based control panel with adjustable speed, sensitivity, and safety features. Weather Protection: Entire system shall be all-weather proof, dust and rain resistant, suitable for outdoor installation.cabling, Documentation: manufacturer’s compliance certificate, operation & maintenance manual, and written warranty confirmation. Future Integration: Provision for integration with access control systems (RFID/biometric). foundation bolts, brackets, and installation hardware. Emergency Release: Manual override mechanism in case of power failure. Warranty & Maintenance: Minimum 2-year warranty with written confirmation, including post-warranty maintenance support. Approved Make: FAAC or equivalent, subject to approval by Engineer-in-Charge. Accessories: All necessary Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender