Tender For Construction Of 11 Kv Independent Feeder For Giving Supply To M/S Govt. Medical College Rudrapur Having Load 1650 Kva Under Electricity Distribution Division, Rudrapur-I Under The Deposit Head.( Rates Should Be Quoted Without Gst) (Gst Wil
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Oct 2026
13 days left
EMD
3.69 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udam Singh Nagar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 11 Kv Independent Feeder For Giving Supply To M/S Govt. Medical College Rudrapur Having Load 1650 Kva Under Electricity Distribution Division, Rudrapur-I Under The Deposit Head.( Rates Should Be Quoted Without Gst) (Gst Will Paid Extra)
BOQ
| Sl. No. | Item Description |
| 1 | Annexure-A (LABOUR CHARGES) |
| 2 | Erection of concrete route marker for HT Cable. |
| 3 | Chemical Earthing including digging of pit of size 2.5 Mtr depth and make hole of size 150 mm. Placing of earthing electrode (to be supplied by contractor), connecting the same with G.I. Strip (to be supplied by contractor) of size 35x6 mm for a minimum lenght 6 m. treatment of soil with highly condctive substance as per IS 30343 complete in all respect, result of earthing resistance to be recroded in M.B. before and after installation of earthing. The earth resistance after earthing should be less than 1 Ohm. |
| 4 | Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESPO schedule and local approved drawing. |
| 5 | Fixing of G.I. Pipe. |
| 6 | Construction of Metering room for Metering Cubical at S/s end Including cost of building/ material and it also include the cost of gate etc. of 10 feet height |
| 7 | Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 33 KV line. |
| 8 | Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual. |
| 9 | Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work. |
| 10 | Erection of SP-72 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual. |
| 11 | Erection of SP-55 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual. |
| 12 | Erection of SP-72 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual. |
| 13 | Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8(1 cement:4 graded stone20 mm niminal size: 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESPO cnstruction manual |
| 14 | Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc. |
| 15 | Painting of SP-55 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level. |
| 16 | Painting of SP-72 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level. |
| 17 | Digging of trench of size 0.60x0.15 x 1.5 mtr and laying of underground 11 KV XLPE cable with making of brick housing and filling of sand including filling of earth with ramming & repairing of road including cost of cement sand and stone blast |
| 18 | Laying of 11KV Cable in 1.5 mtr depth with suitable trencheless technology including laying in trench with providing & fixing of HDPE pipe PE 80 PN 6 & having dia 160 mm conferming to IS 4984/1995 & having thickness 9.1 to 10.3mm. |
| 19 | Jointing and fixing of cable jointing kit indoor/outdoor 11 KV XLPE heat shrinkable cable boxes. |
| 20 | Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km) |
| 21 | Cartage of ST pole SP-72 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 0-20 Km) |
| 22 | Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 0-20 Km) |
| 23 | Headload cartage of SP-55 Pole from road to site (distance 0-1 Km) |
| 24 | Headload cartage of SP-72 Pole from road to site (distance 0-1 Km) |
| 25 | Digging of pit for making trench 0.6x0.15x1.5 mtr depth, including brick and sand work & back filling as per RESPO. |
| 26 | Dismantling of 33 KV line (Panther/Dog) |
| 27 | Erection/Installation, Testing and Commissioning of Proposed HTLS Composite Carbon Core Conductor with Hardware fittings and Accessories in the above line as per Technical Specification & Direction of the Engineer in Charge complete in all respect. |
| 28 | Cartage of 11 KV VCB O/G. |
| 29 | Headload Cartage of 11 KV VCB O/G. |
| 30 | Back Carriage of Scrap Material |
| 31 | Annexure-B (SUPPLY ITEMS)(As per UPCL Norms) |
| 32 | Supply of Holding Clamp for SP-55 with N&B. |
| 33 | Supply of double pole clamps with N/B for SP-55. |
| 34 | Supply of Danger Board |
| 35 | Supply of Bolt & Nuts off size. |
| 36 | Supply of GI Pipe 6 inch diameter (8 No. 8 M each) |
| 37 | Supply of Suspension Clamp HTLS |
| 38 | Supply of Dead End Clamp HTLS |
| 39 | Supply of Vibration Damper HTLS |
| 40 | Supply of Repair Sleeve HTLS |
| 41 | Supply of Mid Span Joint HTLS |
| 42 | Supply of alignment ties for ACSS HTLS Conductor |
| 43 | Supply of 160 MM HDPE conduct pipe. |
| 44 | Supply of HTLS (ACSS) Conductor 700 Amp Capacity |
| 45 | Supply of G.I. Strip 40x6 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender