Tender For Special Repairs To Electrical Installation In Phc At Alangudi In Thiruvarur District.
Tender Value
5 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
3 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvarur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Electrical Installation In Phc At Alangudi In Thiruvarur District.
BOQ
| Sl. No. | Item Description |
| 1 | Rewiring with 2 x 1.5sq.mm PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switchbox with 5A FT switch inflush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light / fan point. (for electronic regulator) (5 points per coil) |
| 2 | Renewal by supply and fixing of 4feet LED 20W fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting. |
| 3 | Renewal by supply and fixing of wall mounted Air circulator fan. |
| 4 | Renewal by supply and fixing of 2.5 mfd fan condensor. (Higher End) |
| 5 | Renewal by supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete ( Higher End) with 2 module 100W fan step regulator (Higher End) with 1 metre down rod with existing fan clamp |
| 6 | Renewal by supply and fixing of 150W LED fitting on existing Mini mast. |
| 7 | enewal by supply and fixing of 48W LED street light fitting with LED (Higher End) with 32mm dia. GI pipe (Class 'B') with 1No 32mm dia. GI bend complete on the existing post / on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting. |
| 8 | Renewal by supply and fixing of 3Nos 5A (3pin and 2pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection. (for computer plug socket) |
| 9 | Renewal by supply and run of 2 of 2.5sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5sq.mm copper wire with painting of suitable colour. |
| 10 | Renewal by supply and fixing of 1No 6/16A two module socket, 1No 16A one module switch on suitable module surface mounting box (plastic) with module cover plate (plastic) on wall with connections. (Higher End) |
| 11 | Renewal by supply and fixing of 20A flush type wall socket 32A DP MCB complete set for AC plug in flush with wall with earth connection. (For AC plug) |
| 12 | Renewal by supply and run of 2 of 4sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4sq.mm copper wire with painting of suitable colour. |
| 13 | Renewal by supply and Installation of 1.5TR (4500K.cal/Hr) ABS Plastic Split type Air Conditioner with Amdt No. 1 to 2 fitted with rotary compressor operating on refrigerant non CFC suitable for wall mounting for operation on 230V, 50Hz, Single phase AC supply with star rating as per BEE specification and capable of performing the functions of Cooling, Dehumidifying, Air Circulating, Filtering. The installation works for the above Split type AC units includes the following. 1.Mounting / Fitting indoor and outdoor units at their respective locations. 2. Laying refrigerant pipeline of required length connecting not exceeding 3 metres distance and both units after drilling hole / holes in the wall if required. 3. Insulating the suction pipe with expanded polyethylene foam 5mm tubing. 4. Laying 25mm dia flexible PVC drain pipe to throw out the condensate water being formed within the indoor unit. 5. Leakage testing the entire system unit . 6. Charging refrigerant gas in the unit. 7. Suitable electric wiring to be provided with 2.5sq.mm PVC insulated copper wire between indoor and outdoor units up to 6 Mtrs length and up to switch within 3 Meters of location of indoor unit. |
| 14 | Renewal by supply and installation of 4KVA Electronic Automatic Voltage Stabilizer with Input Voltage range of 170V – 270V and Output Voltage range 200V to 240V with High and Low Voltage cut off and 3 minutes time delay relay with demonstration. |
| 15 | Renewal by supply and fixing of angle Iron frame work to rest the Outdoor unit. |
| 16 | Renewal by supply and fixing of water drain pipe. |
| 17 | Renewal by supply and laying of 5/8\\" and 3/8\\" copper pipe (Extra beyond 3 metres supplied with AC unit) |
| 18 | Renewal by supply, erection, testing, commissioning uninterrupted power supply (sinewave) with copper wound transformer of 2250VA with input supply of 230V, 50Hz, AC supply with 200AH Tubular battery to work at full load capacity including transportation with following specification. 1.Input voltage: 230V, 50Hz single phase AC supply.2.Output voltage: 220V to 240V, 50Hz, AC supply.3.Battery charging device of suitable rating4.Circuit board of suitable capacity5.Over load and short circuit protection6.Visual Indication for ON / OFF / Trip / battery charging / mains failure / low battery etc.,7.Mode setting for By pass / Reset8.12V, 200AH battery - 2Nos. |
| 19 | Renewal by supply and run of 2 of 1.5sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5sq.mm copper wire with painting of suitable colour. |
| 20 | Renewal by supply and fixing of 5 KVA single phase Servo stabilizer. |
| 21 | Renewal by supply and clamping of 3½ x 50sq.mm PVC LTUG armoured cable on post or on wall with MS clamps. |
| 22 | Renewal by supply and run of 2 of 6sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wirefor service connection mains. |
| 23 | Renewal by Earthing as per PWD standard with an earth electrode of 2 metre Class'B' GI pipe of dia not less than 32 mm complete with necessary masonry work. |
| 24 | Renewal by supply and run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. |
| 25 | Sub Total |
| 26 | Add GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender