Tender For _2_Construction Of First Floor Library In Side Jhola Sahi Primary Girls School In Ward No. 26
Tender Value
31.61 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
14 days left
EMD
31600
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for _2_Construction Of First Floor Library In Side Jhola Sahi Primary Girls School In Ward No. 26
BOQ
| Sl. No. | Item Description |
| 1 | Fly ash bricks 25 cm x 12 cm x 8 cm size having crushing strength not less than 75 Kg/cm2 in cement mortar (1:6) in super structure including cost of materials, labour, royalty, conveyance, Tools and Plants, water for curing etc. all complete as per OPWD specification required for the work to finished items of work |
| 2 | Cement concrete work of M20 grade with 20 mm and down grade crusher broken hard granite chips including hosting and laying, cost of materials, labour, conveyance, royalty, tools and plants, water for curing etc.all complete as per OPWD specification required for the work to finished items of work. |
| 3 | Requirement of HYSD/ MS rod & labour for cutting, bending, binding, straighting and laying the grills and placing in position including cost of rod & binding weir 18 to 20 gauge. 62 |
| 4 | RCC Lintel, etc |
| 5 | RCC beams, column, grider and bressmer, etc 68 |
| 6 | RCC floor and roof slabs, landings,balconies, projecting sun shades and chajjas 65 |
| 7 | RCC walls and fins including attached pillasters 70 |
| 8 | Supplying, fitting and fixing vitrifed tile In floors of size 600 mm x 600 mm of approved make conforming to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand ) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC. 273 |
| 9 | Fixing Vitrified tiles in dados skirting and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles. 132 |
| 10 | Finishing surface of walls with cement based wall putty (water based) and wall primer of approved make and finished smooth and even surface to receive cement paint water bound including cost of caffolding staging charges with cost of all materials taxes, labour T&P etc complete. 280 |
| 11 | Finishing walls with water proofing weather coat paint of approved shade two coats to give an even shade including cost of paint and labour etc all complete. with approved paint and primer, cost of labour and materials ect. all complete. 153 |
| 12 | Finishing walls with two coats water proofing weather coat of approved make including cost of caffolding staging charges with cost of all materials taxes, labour T&P etc complete. 158 |
| 13 | Painting two coats with approved paint and primer including cost of labour and materials ect. all complete. 151 |
| 14 | Labour for fitting and fixing of MS window grills as per approved design including cost of all materials complete and directon of EIC. 296 |
| 15 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost of conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. 279 |
| 16 | Requirment of MS door, window & grill and its cost etc |
| 17 | Requirement of PVC/ Aluminium cum ACP sheet Door |
| 18 | 3.2.5- Providing and laying in trenches unplasticised PVC pipes confirming to IS-4985/ 2000 of class III (6 kg/cm2) of the following nominal bore and pipe fittings including testing as per specification complete (E/W in trenches to be measured paid for separately) 390 |
| 19 | 3.3.2- Providing and fixing on wall face unplasticised rigid PVC soil, waste and rain water pipes conforming to IS:13592 type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 420 |
| 20 | 3.2.7- Providing and laying in trenches PVC pipes confirming to ASTM-D-1785/ 89 (Sch-80) of the following nominal bore and pipe fittings including testing as per specification complete (E/W in trenches to be measured paid for separately) 391 |
| 21 | 3.1.4- Providing and fixing to wall or ceiling and floor PVC pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete.ASTM Sch-82 20 mm |
| 22 | ASTM Sch-82 25 mm |
| 23 | 3.1.8- Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extras ockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the EIC. 367 |
| 24 | Construction of brick masonary work stagging of syntex with brick work in cm (1:6), plastering in cm (1:4) and cement puuning including all cost, taxes, royalty, conveyance etc all complete. |
| 25 | 3.1.10- Supplying all materials, labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar (1:4) for taking GI/ PVC pipes and fitting. 368 |
| 26 | 3.1.11- Supplying all materials, labour and T&P for cutting holes in RCC floors and roofs upto 19 mm thick including making good and leak proof for taking GI pipes/ PVC pipes and fittings. 369 |
| 27 | 3.1.12- Supplying all materials, labour and T&P for cutting grooves in pucca floor and walls for taking GI pipes and fittings/ PVC pipes and fitting and making good to the damages. 370 |
| 28 | 3.2.13- Fixing ferrule conforming to IS:2692-1978 of 15 mm dia nominal bore including drilling the water main (Cast Iron pipes or pipes with the metal straps) as per Specification complete. 393 |
| 29 | 3.2.14 (vi)- Fixing of 15 mm dia CP brass screw down long body bib cock (Tap) polished bright confirming to IS 781-1995 of the following nominal size as per specification complete 394 |
| 30 | 3.2.14 (vii)- Fixing 15 mm dia CP Flange polished bright confirming to IS 781-1995 of the following nominal size as per specification complete 395 |
| 31 | 3.2.14 (viii)- Fixing of 15 mm dia CP extension piece 25 mm long polished bright confirming to IS 781-1995 of the following nominal size as per specification complete 396 |
| 32 | 3.2.16 (vii)- Fixing of 15 mm dia brass or CP screw down angle stop cocks / conceated stop cocks /angle stop cocks confirming to IS 781-1995 of the following nominal size as per specification complete15 mm dia CP BRASS Concealed stop cock |
| 33 | 20 mm dia CP BRASS Concealed stop cock |
| 34 | 3.2.17- Fixing of brass ball valve (Horizental plunger type) confirming to IS 1703-1977 as per specification complete.25 mm |
| 35 | 50 mm |
| 36 | 3.4.4- Fixing Wash down water closet ( European type WC ) with intigral 'P' or 'S' trap confirming to IS 2556:Part 8-2004 to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement morter (1:1) etc all complete as per specification (Seat and cover to be measured and paid for separately) 441 |
| 37 | 3.4.5- Fixing plastic seat and cover for wash down water closet with chromium bress hinges and rubber buffers all complete as per specification. 442 |
| 38 | 3.4.6- Providing and fixing PVC Low flushing cistern with manually controlled device (hand lever) confirming to IS 7231 with all fitting and fixing etc. all complete as per specification. 443 |
| 39 | 3.4.11- Fixing wash basin with hole for Piller Taps confirming to IS 2556:Part 4-2004 with Cost iron or M.S brackets painted while including cutting holes in walls and making good the damages etc all complete as per specification. 446 |
| 40 | 3.4.20- Fixing PVC waste pipe of semi rigid PVC waste pipe 32 mm dia with length not less than 700 mm with PVC waste fittings nominal diameter for wash basin or sink including brass check nut complete as per specification 447 |
| 41 | 3.4.21- Fixing of 15 mm dia pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification 448 |
| 42 | 3.4.22- Fixing 15 mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification 449 |
| 43 | 3.4.23- Fixing Chromium Plated brass waste of the following nominal diameter for wash basin and sink as per specification 450 |
| 44 | 3.4.24- Fixing Chromium Plated Brass Shower rose with15 mm or 20 mm inlet including polishing all complete as per specification. 451 |
| 45 | 3.4.26- Fixing 600 mmx 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification. 452 |
| 46 | 3.4.27- Fixing standard sized glass- shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification. 453 |
| 47 | 3.4.28- Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass crews, complete as per specification. 454 |
| 48 | 3.4.30- i) Fixing (a) Liquid Soap Container– Glass containeror Plastic container with Chromium Plated brass lid and brackets fixed to wooden plugs with Chromium Plated brasss crews or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screwsor (c) white glazed tooth brush holder fixed to wooden plugs with Chromium Plated brass screws as per specification. 455 |
| 49 | 4.1.1- Providing and laying in trenches UPVC pipe class III (6kg/cm2) 75 / 110 mm dia ODPVC as sewer line and alinging to requisite gradients inside the trench, jointing with solvent cement cement with 0.08 mt sand filling in bed, 0.10 mt CC (1:4:8) using 40mm size hbg metal in bed and 466 |
| 50 | 4.2.10- Supplying all materials, Labour, T&P, for construction of Inspection Chamber of size 0.75 m x 0.75 m, 0.65 m deep with 100 mm thick cement precast RCC slab in CC (1:11/2:3), 100 mm thick sand filling in foundation, 150 mm thick CC (1:3:6) using 40 mm size hbhg metal in foundation, KB brick masonry in CM (1:4) using 25 cm size brick, inside plaster 12 mm thick in CM (1:4), neat cement punning, outside plaster in CM (1:3), CC (1:2:4) with neat cement punning for benching, channeling and brick wall top including earth work in excavation, earth filling with excavated earth to outside cavity of chamber etc complete. 477 |
| 51 | Providing and fixing on wall face UPVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving10 mm gap for thermal expansion (i) Single socketed pipes75 mm Couplers |
| 52 | 110 mm Couplers |
| 53 | 110x 110x110xmm PVC Tee without door |
| 54 | 110x 110x110xmm PVC Tee with door |
| 55 | Supplying, filling, fixing up window (sliding type) made up UPVC of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame shutters and all fittings and fixtures, |
| 56 | supplying all materials, labour Tæp for fitting, fixing of steel letter ete complete |
| 57 | Fixing Granite tiles above 0.40 sqm (20 mm thick) in floors treads or steps and landing on 25 mm thick bed of cement mortar 1:1 (lcement: Isand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast |
| 58 | Add Display Board |
| 59 | Providing fitting and fixing of false ceilling with aluminium anodised T Section No. 3215 with 2-0\\" center to center, L. section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminium grid 2-0\\"x7-0\\" with prelaminated particle board suspended from ceiling etc complete. 275 |
| 60 | Supplying, fitting & fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with Imm thick sunmica on both side of approved design & quality including cost of all door fittings & fixtures etc. Complete. |
| 61 | Supplying, & fixing of wall panelling made of aluminum anodised section framing conforming to standard Aluminium sections as horizontal & vertical members with atleast 600mm c/c & fixing of |
| 62 | Supplying, & fixing of wall panelling made of aluminum anodised section framing conforming to standard Aluminium sections as horizontal & vertical members with atleast 600mm c/c & fixing of |
| 63 | Supplying & fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approval design and quality ete. Completed. |
| 64 | Supplying, placing and fixing of Godrej make metal rectangular office table with 5 drawers storage, 64 particle board table top material suitable for office of dimensions Dimensions W x H x D (mm) 1365 x 735 x 680 of rectangular shaped with lock facility and as per direction of Engineer-in-charge |
| 65 | supplying and placing of Nilkamal MAGIC IRON BLACK plastic chair with arm rest stackable texture finish 1 seater of dimesnions 570 (W) 607(D) 900 (H)and as per direction of Engineer-in-charge |
| 66 | Supplying, placing and installing White And Gray Godrej Glass double Door Storwel Almiral/Bookshelf of Iron and glass material with Brass levers lock, handles, standard grade enamel paint coating is oven dried under controlled temperature to avert damaging effects of scratch, ccessible with 10 types of separate lockers, of dimesnions 914 mm (W), 320 mm (D). 947 mm (H), and as per the direction of Engineer-in-charge |
| 67 | Supplying all Materials. Labour T&P for Purch of Different Type of Eduction Book forReading of general Public etc completye. |
| 68 | Display Board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender