Tender For Construction Of Annapurti (Grain Atm) House With Store Room Near Old Municipality Office, At-Daleipada, Sambalpur.
Tender Value
19.70 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
7 days left
EMD
19702
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Annapurti (Grain Atm) House With Store Room Near Old Municipality Office, At-Daleipada, Sambalpur.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling G.C.I. orA.C. sheet roofing after carefully removing the bolt and nuts including stacking of the materials for reuse and removing the debries within 50m. lead. |
| 2 | Dismantiling brick or stone masonry in cement mortar under 3m. Height including stacking the useful materials for reuse and removing the debries within 50m. Lead. |
| 3 | Pre site cleaning & leveling and disposal of waste materials from site to certain place. |
| 4 | Earth work in excavation of foundation in hard soil with in intial lead and lift including rough dressing and levelling the bed etc. complete. |
| 5 | Earth dressing for floor levelling |
| 6 | Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers with top surface dressed and leveled to proper gradient including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 7 | Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) , mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. |
| 8 | Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating Each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer-In-Charge. |
| 9 | Disposal of Earth |
| 10 | Providing Flyash bricks having crushing strength 100kg/cm2 to149kg/cm2 in cement mortar (1:4), immersing the bricks in water before use,splays cutting, circular moulding , corbelling,curing and watering etc.including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 11 | 2.5cm. thick Damp proof course with c.c.(1:2:4) using 12mm. size c.b.b.h.g. chips |
| 12 | Providing and laying in position machine batched,/ machine mixed concrete of specified grade for reinforced cement concrete work including laying of concrete using 12 mm 20 mm size crusher broken hard granite chips including the cost of centering, shuttering, and reinforcement , improve workability without impairing strength and durability as per direction of Engineer- In - Charge. including cost all materials, conveyance , royalties and taxes, loading and unloading cost of all labour,sundries, T&P etc.complete. i.)Column footing |
| 13 | Tie Beam & plinth beam |
| 14 | Column upto roof level |
| 15 | Lintel Beam |
| 16 | Chajja |
| 17 | Roof Beam |
| 18 | Roof slab |
| 19 | Steel reinforcement for R.C.C. work including straightening, cutting,bending,binding, placing in position and cost of binding wires of 18 to 20 gauge including cost of labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. |
| 20 | Providing Fly ash bricks having crushing strength between 100kg/cm2 to149kg/cm2 in cement mortar (1:6), immersing the bricks in water before use , splays cutting, circular moulding, corbelling,curing and watering etc.including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, scaffolding, sundries and T&P etc all complete as per direction of the Engineer -in-charge. |
| 21 | Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:4) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings .including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties,watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge. |
| 22 | Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth, using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings .including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties,watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge. |
| 23 | Providing c.c.(1:2:4) using 12mm H.G.C.B Chips including cost & conveyance of all materials to site. |
| 24 | Providing and fixing ceramic glazed floor tiles of approved size conforming to IS: 15622 specifications of approved make and shade, in skirting and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and finishing the joint with epoxy based water proofing grout to match the shade. All complete as per the direction of Engineer-in-charge.(Sonaly / kajaria or equivalent - premium quality). |
| 25 | Vertified Tiles to the walls (600X600)mm |
| 26 | Chequrred tiles |
| 27 | Supplying fitting fixing of Aluminium door with OEL anodized Al.door section of 9202 as vertical member, 9201 as top member & 9200 as bottom & middle member & 6mm. thick plain black glass in top portion with 12mm. thick prelaminated board in bottom portion fixed on door frame by means of tappered clip No.-4660 & the frame the frames to be ompleted by means of jointing angle No.-1855 including cost of all labour, T & P, hire charges of Drilling machine etc. complete. |
| 28 | Supplying fitting fixing of window sliding type made up alluminium section with 5mm thick black glass etc complete and finished.Data for 1.49 Sqm, A/R Item-7, Page-240 |
| 29 | Supplying, Fitting and Fixing M.S Grills of approved designs made out of M S Flat, Square bars/Round bars etc. of approved specifications / dimensions with necessary welded clamps fixed in proper position & plumb including a single coat of priming of approved quality metallic primer, making required holes in Massonary Walls / R.C.C Structures (where necessary) and grouting the clamps with C.C(1:2:4) with 12mm size black hard crusher broken granite stone chips, making good to the damages of Massonary Walls / R.C.C Structures including cost, conveyance, loading, unloading,stacking, royalties and taxes of all materials , cost of all labours, staging, scaffolding, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. (MR) |
| 30 | Painting with synthetic enamel paint of approved colour, shade and brand like ICI/ Asian/ Berger on New iron work in two or more coats as required to give an even shade including an under coat of suitable red oxide primer of approved brand and manufacturer including cost of all materials with taxes and transportation, loading, unloading, scaffolding, all labour, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge including filling gaps with putties, scrapping, sand papering and cleaning the surface to make free from rusts, dusts and oily substances before applying primer etc. complete. |
| 31 | Finishing the plastered surface of walls with Acrylic wall Putty (water based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding, staging charges with cost of all materials, taxes, labour, T & P etc. complete. |
| 32 | Wall painting two coats with plastic emulson paint/weather coat of approved said on new work to give an even surface. |
| 33 | Supplying ,fitting and fixing of stainless steel of 304 grade in hand railing of total heifht 0.9 m using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm dia and stainless pipe bracing of size 25mm x 2mm in 3 rows in staircase , balcony ,utility an etc. as per approved design and specification , buffing, polishing etc with cost ,conveyance, taxes of all materials,labours,T&P etc complete in all respect as per the direction of Engineer-in-charge. |
| 34 | Supplying fitting and fixing G.I. Trafford Sheet (TATA make) in Roof including fixing of ridges etc complete. Please Enable Macros to View BoQ information Compatibility Report for BOQ FORMAT.xls Run on 3/12/2026 17:30 The following features in this workbook are not supported by earlier versions of Excel. These features may be lost or degraded when opening this workbook in an earlier version of Excel or if you save this workbook in an earlier file format. Significant loss of functionality # of occurrences Version Any effects on this object will be removed. Any text that overflows the boundaries of this graphic will appear clipped. 3.0 Excel 97-2003 One or more cells in this workbook contain data validation rules which refer to values on other worksheets. These data validation rules will not be saved. 3.0 Excel 97-2003 Minor loss of fidelity Some formulas in this workbook are linked to other workbooks that are closed. When these formulas are recalculated in earlier versions of Excel without opening the linked workbooks, characters beyond the 255-character limit cannot be returned. 5Defined Names Excel 97-2003 Some cells or styles in this workbook contain formatting that is not supported by the selected file format. These formats will be converted to the closest format available. 5.0 Excel 97-2003 |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender