Tender For Installation Of Jali, Painting And Repair Of Open Well In D&Nh Area. (North Zone)
Tender Value
3.82 Crore
Estimated cost
Bid Submission
28 Sep 2026
6 days left
EMD
7.64 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dadra and Nagar Haveli → Dadra and Nagar Haveli
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Jali, Painting And Repair Of Open Well In D&Nh Area. (North Zone)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.All strata |
| 2 | Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials(A) By manual means in area of light jungle |
| 3 | Demolition and disposal of unserviceable materials with all lead and lift.(i) concrete. |
| 4 | Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. |
| 5 | Masonary for well steining in CM 1:6 above ground level and upto 1.50mt depth below average ground level using burnt brick of standard size. |
| 6 | Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete |
| 7 | Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete. |
| 8 | Cement plaster 20mm thick rought coat with 1:3 including water curing etc complete for well including cement finishing |
| 9 | Finishing with a floating coat of neat cement slurry. |
| 10 | Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level |
| 11 | Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powderedmaterials.etc complete |
| 12 | Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. |
| 13 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing,interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter. |
| 14 | Providing and fixing M.S. grills of required pattern to wooden frames of windows, cover of wells etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws Complete all (A) Plain Grill. Fixing M.S jali on top as directed by Engineer in Charge |
| 15 | Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (A) In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like. Direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender