Tender For Comprehensive Maintenance For Civil And Electrical Works Of Cmpdi Ri-Vi Colony, Office & Its Premises, At Jayant, Singrauli For A Period Of Two Years
Tender Value
3.23 Crore
Estimated cost
Bid Submission
09 Oct 2026
3 days left
EMD
4.04 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Singrauli → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance For Civil And Electrical Works Of Cmpdi Ri-Vi Colony, Office & Its Premises, At Jayant, Singrauli For A Period Of Two Years
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | PART A FOR RESIDENTIAL COLONY AND TOWNSHIP CIVIL (without ITC) |
| 2 | PART B FOR TOWNSHIP ELECTRICAL(without ITC) |
| 3 | PART C FOR OFFICE BUILDING CIVIL (with ITC) |
| 4 | PART D FOR OFFICE BUILDING ELECTRICAL (with ITC) |
| 5 | PART A FOR RESIDENTIAL COLONY AND TOWNSHIP CIVIL (without ITC) |
| 6 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. |
| 7 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 8 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 10 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 11 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil |
| 12 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth. |
| 13 | Beyond 60 cm girth upto and including 120 cm girth |
| 14 | Beyond 120 cm girth upto and including 240 cm girth |
| 15 | Above 240 cm girth |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 18 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 19 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
| 20 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for :Weather shade, Chajjas, corbels etc., including edges |
| 25 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 26 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 27 | Brick work with FALG bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 28 | Brick work with FALG bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 29 | Half brick masonry with FALG bricks of class designation 7.5 in superstructure above plinth level up to floor V level : Cement mortar 1:4 (1 cement :4 coarse sand) |
| 30 | Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand). |
| 31 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. :Granite of any colour and shade: Area of slab upto 0.50 sqm |
| 32 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. :Granite of any colour and shade:Area of slab over 0.50 sqm |
| 33 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. |
| 34 | Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick. Granite of any colour and shade |
| 35 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 36 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately): Sal wood |
| 37 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately): Kiln seasoned selected planks of sheesham wood 30 mm thick shutters |
| 38 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). |
| 39 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 12 mm thick |
| 40 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 18 mm thick |
| 41 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).: 18 mm thick. |
| 42 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).:25 mm thick |
| 43 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. : 35 mm thick including ISI marked Stainless Steel butt hinges with necessaryscrews. |
| 44 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. :30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 45 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. :25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws. |
| 46 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 47 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 48 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 49 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia |
| 50 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :20 mm dia (heavy type) |
| 51 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc |
| 52 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 grams |
| 53 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm |
| 54 | 100X58X1.90 mm |
| 55 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :75 x 47 x 1.70 mm |
| 56 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :50x37x1.50 mm |
| 57 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 58 | Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 115 mm |
| 59 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 60 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 50 mm. |
| 61 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
| 62 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250 x 10 mm |
| 63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 x 10 mm |
| 64 | Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. |
| 65 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 66 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-incharge. |
| 67 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. |
| 68 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) |
| 69 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick |
| 70 | Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment). |
| 71 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading |
| 72 | Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. |
| 73 | Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete. |
| 74 | Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately). Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 |
| 75 | Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confirming to IS:14587 |
| 76 | Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade- I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge ending tape 2.00 mm thick of approved brand (fittings to be paid separately). Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 25 mm thick confirming to IS:14587 |
| 77 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. : 125 mm |
| 78 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. : 100mm |
| 79 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. : 75 mm |
| 80 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineerin- charge (Note: Fittings to be paid separately).18 mm thick. |
| 81 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket s per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineerin- charge. (For payment purpose only weight of stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) |
| 82 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 83 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces |
| 84 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 85 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 86 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c ixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 87 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with : 4.0 mm thick glass panes. |
| 88 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregate |
| 89 | Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. : 18 mm thick |
| 90 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size. Size of Tile 600 x 600 mm. |
| 91 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600 x 600 mm. |
| 92 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. |
| 93 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 94 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
| 95 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 96 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 75 mm |
| 97 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm |
| 98 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75x75x75 mm Tee with door |
| 99 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110x110x110 mm Tee with door |
| 100 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm (with/without door) |
| 101 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm (with/without door) |
| 102 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain) 75 mm |
| 103 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm |
| 104 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. : 75 mm. |
| 105 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. : 110 mm |
| 106 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 107 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. : 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\" ) as specified. |
| 108 | Cement Plaster: 12 mm cement plaster mix. 1:6 (1 cement: 6 coarse sand) |
| 109 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand) |
| 110 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 111 | Neat cement punning |
| 112 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.Two or more coats on new work |
| 113 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 114 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 115 | Applying priming coat : With ready mixed pink or grey primer of approved brand and manufacture on wood work (Hard and soft wood) |
| 116 | Applying priming coat : With ready mixed aluminium primer approved brand and manufacture on resinous wood & plywood. |
| 117 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 118 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : One coat |
| 119 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats. |
| 120 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 121 | Painting with superior synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 122 | Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 123 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 124 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 125 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats) |
| 126 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 127 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 128 | Painting with superior synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work |
| 129 | Painting with aluminium paint of approved brand and manufacture to give an even shade : One or more coats on old work |
| 130 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 131 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement : 4 coarse sand) |
| 132 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty : Float glass panes of thickness 4 mm. (Weight not less than 10 kg / sq.m) |
| 133 | Renewal of old putty of glass panes (length) |
| 134 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
| 135 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. |
| 136 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm. |
| 137 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer- in-Charge. (a) Internal Work- Exposed on wall |
| 138 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 139 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 140 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 141 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar |
| 142 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 143 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area beyond 3 sq. metres |
| 144 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. |
| 145 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. |
| 146 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 147 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 148 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 149 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 150 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 151 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm |
| 152 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board: 510x1040 mm bowl depth 200 mm |
| 153 | Providing and fixing white vitreous china water closet squatting pan (Indian type) - Orissa pattern W.C . pan of size 580x440 mm. |
| 154 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 155 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge |
| 156 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 157 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid |
| 158 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 159 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 160 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm |
| 161 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe: 32 mm dia |
| 162 | 40 mm dia |
| 163 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 164 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 165 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 166 | Providing and fixing toilet paper holder : C.P. brass |
| 167 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
| 168 | Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms |
| 169 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms |
| 170 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 171 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 172 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 173 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 174 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 175 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 15 mm nominal dia Pipes. |
| 176 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 20 mm nominal dia Pipes |
| 177 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 25 mm nominal dia Pipes |
| 178 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 32 mm nominal dia Pipes |
| 179 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 40 mm nominal dia Pipes |
| 180 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 50 mm nominal dia Pipes |
| 181 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.:15 mm nominal outer dia Pipes |
| 182 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.:20 mm nominal dia Pipes |
| 183 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.:25 mm nominal dia Pipes |
| 184 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 25 mm nominal outer dia Pipes |
| 185 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 32 mm nominal dia Pipes |
| 186 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 40 mm nominal dia Pipes |
| 187 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 50 mm nominal dia Pipes |
| 188 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 65 mm nominal dia Pipes |
| 189 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 80 mm nominal dia Pipes |
| 190 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 100 mm nominal dia Pipes |
| 191 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall. 15 mm dia nominal bore. |
| 192 | 20 mm dia nominal bore |
| 193 | 25 mm dia nominal bore |
| 194 | 32 mm dia nominal bore |
| 195 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work. 20 mm dia nominal bore |
| 196 | 25mm nominal bore |
| 197 | 32mm nominal bore |
| 198 | 40mm nominal bore |
| 199 | 50mm nominal bore |
| 200 | 65mm nominal bore |
| 201 | 80mm nominal bore |
| 202 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 203 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :50 to 80 mm nominal bore |
| 204 | Providing and fixing gun metal gate valve with C. I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 205 | 20 mm nominal bore |
| 206 | 32 mm nominal bore. |
| 207 | 40 mm nominal bore |
| 208 | 50 mm nominal bore |
| 209 | 65 mm nominal bore |
| 210 | 80 mm nominal bore |
| 211 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore |
| 212 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore |
| 213 | 20 mm nominal bore |
| 214 | 25 mm nominal bore |
| 215 | Providing and fixing uplasticised PVC connection pipe 30 cm length with brass unions : 15 mm nominal bore |
| 216 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 217 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet. 150 mm diameter |
| 218 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter. Class I |
| 219 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :15mm nominal bore |
| 220 | 20mm nominal bore |
| 221 | 25mm nominal bore |
| 222 | 32mm nominal bore |
| 223 | 40mm nominal bore |
| 224 | 50mm nominal bore |
| 225 | 65mm nominal bore |
| 226 | 80mm nominal bore |
| 227 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 228 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 229 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. |
| 230 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 231 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 232 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore. |
| 233 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 234 | Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 235 | Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 236 | Providing and fixing PTMT pillar cock of approved quality and colour : 15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 237 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.: 25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 238 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms |
| 239 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 240 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length. |
| 241 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms. |
| 242 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 243 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 244 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides. |
| 245 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) |
| 246 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width. |
| 247 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) : Using old bricks |
| 248 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) : Using old bricks |
| 249 | Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand) : Using old bricks |
| 250 | Day to day Misc. Repair & maintenance of water supply and sanitary system for smooth running of the system by semi skilled plumbing 'Mistry' and unskilled helper with all necessary instruments and equipments excluding materials to be replaced which will be supplied by the 'Institute', but including supply of materials like washers, serews, G. I. bolts & nuts, jute packing, jute/rubber/synthetic gascades, clamp hook, sealant, water tight paints for pipe joints, fixing clamps, small brackets and other incidental sundries required to complete the work as per direction of Engineer-in-Charge. |
| 251 | Day to day misc repair and maintenance of wooden/aluminium/MS doors, windows, chowkhats, shutters, cabinet, wardrobes, partition etc and allied fittings/ fixtures for proper operation by semi skilled carpentary 'Mistry' and unskilled helper with all necessary tools, plants, tackles and equipments, excluding major material/components to be replaced which shall be supplied by the 'Institute' but including minor materials like screws, nails, bolts and nut, washer, adhesive, synthetic resin, sand paper, filler, putty, sealant and other incidental sundries required to complete the work as per direction of Engineer in charge. |
| 252 | Providing & fixing CP pillar cock. 15mm nominal bore |
| 253 | Providing kota stone draining board. (fixing with 25mm kota stone beat arelite) The board shall have a fluted surface with smooth finish complete 600x450x25mm size. |
| 254 | Providing aluminium sheet 24 guage |
| 255 | Providing float valve for cistern |
| 256 | Providing cover of PVC water tank (on roof top) |
| 257 | Providing G I bend/ elbow 15mm dia |
| 258 | Providing G I bend/ elbow- 25mm dia |
| 259 | Providing G.I sockets - 15mm |
| 260 | Providing G.I sockets - 25mm |
| 261 | Providing G.I tees - 15mm |
| 262 | Providing G.I tees - 25mm |
| 263 | Providing 100mm foot valve for underground sump |
| 264 | Providing C.I. Bracket for wash basin and sinks as per instruction of EIC. |
| 265 | Providing Unplasticized Polyvinyl Chloride (Pvc-U) Pipes For Soil And Waste Discharge System (Type B) as per -IS:13592, 150 mm dia as per instruction of EIC |
| 266 | Providing Stainless steel jali 100mm as per direction of Engineer in charge |
| 267 | Providing Gun metal Ball valve 15mm as per direction of EIC |
| 268 | Providing brass gear for bib/stop/pillar cock 15mm nominal bore as per direction of EIC |
| 269 | Providing C.P. brass 2 in 1 quarter turn bib cock of approved quality as approved by Engineer-In-Charge. 15 mm nominal bore |
| 270 | Providing Health Faucet with CP Tube & Hook set of minimum 1 m long of. 15 mm nominal bore |
| 271 | Providing Brass Material 160degree 25mm diameter Magic Eye on door shutter as per direction of EIC |
| 272 | Providing C.P. brass shower arm with 15 or 20 mm inlet : 100 mm diameter |
| 273 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992: Fittings: Vent Cowl 110 mm |
| 274 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992: Fittings: 110 X 110 P Trap : 75mm |
| 275 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992: Fittings: 110 X 110 S Trap : 75mm |
| 276 | Supply of UPVC SWR pipe (Type B) confirming to IS:13592 for waste connection as per direction of Engineer in charge. 110mm. |
| 277 | Providing medium size lock |
| 278 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 279 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 280 | Cleaning of toilet/wash room using suitable material such as detergent, phnyl, toilet cleaner etc (Materials to be paid separetly) including w.c.pan,urinal, wash basins and mirror etc.of all existing residential Type I, Type II and three storeyed B type units once in a week and OTC,New Substation daily as per instruction of EIC. |
| 281 | Cleaning of all type of drains (Fortnightly: 4 main drains (450mm or above) including outside drain from colony to MPEB, Weekly: secondary drains (250mm) on both sides of the road and behind qtrs and Weekly tertiary drains (125mm) inside the premises of all 127 nos. of residential qtrs and OTC) of the entire colony including removing RCC covers where ever required and resetting the same and disposal of debris, dry leaves and rubbish etc. as per instruction of Engineer-Incharge. Main Drain Fortnightly |
| 282 | Secondary Drain on both sides of the road and behind qtrs : Weekly |
| 283 | Tertiary Drain/Small Drain inside the premises of all old residential qtrs and OTC : Weekly |
| 284 | Sweeping of entire black top road and other pavements along with side berms, service complex open areas, shopping complex open areas and OTC open area, disposal of rubbish, waste etc on daily basis as directed by Engineer-Incharge (Broomsticks to be paid separetaly). |
| 285 | Operating water supply pumps smoothly and attending emergency plumbing related complaints (if any) on daily basis in three shifts in a day including greasing the pumps & motors [materials to be paid seperately]. |
| 286 | Operation of all valves of water supply pipe line propely in order to avoid any wastage of overflow etc in two shifts in a day. |
| 287 | Cleaning of under ground water reservoir with bleaching powder [materials to be paid seperately], two operation in a year as per instruction of Engineer In-charge. |
| 288 | Cleaning of PVC roof top water tank two times in a year, temporary switchoff of main inlet valve to the tank, removing and refixing of cover along with float valve without damage, emptying, scrubbing with brush and sikh jhadu using bleaching powder [materials to be paid seperately] . Waste water after cleaning should be completely removed and tanks should be refilled with fresh water by opening main inlet valve complete as per instruction of Engineer In-charge. 500 litre. |
| 289 | 1000 litre. |
| 290 | 1500 litre. |
| 291 | 2000 litre. |
| 292 | Cleaning and desludging of septic tank of all sizes by mechanized means only (suction-cum-jetting machine / vacuum tanker), including opening of cover, removal of sludge and night soil, collection, transportation and safe disposal outside colony premises in leak-proof container, refixing of cover and sealing of joints with cement mortar (1:4), complete as per direction of Engineer-in-Charge. |
| 293 | Through Cleaning of existing Type I and Type II quarters at the time of shifting / other occasions including washing of floors, cleaning of mirrors, wash basin, kitchen sink, drain board, kitchen platform and disinfecting toilets, dusting of doors, windows, cupboard shelves and removing cob web, brooming all around premises of quarters including disposal of waste material etc complete as per the instruction of Engineer-Incharge. |
| 294 | Supply of materials (Qty. Of materials should be supplied proportianately average consumption per month):- Detergent Powder |
| 295 | Seekh Jhadu |
| 296 | Mopping cloth |
| 297 | Toilet cleaner /Harpic |
| 298 | Toilet cleaning brush |
| 299 | Wash basin cleaning brush |
| 300 | Bleaching powder |
| 301 | Scrub Brush |
| 302 | Grease |
| 303 | Toilet freshner/Odonil |
| 304 | Phool Jhadu |
| 305 | Phenyl White |
| 306 | Phenyl Black |
| 307 | Colin |
| 308 | Phenyl Goli |
| 309 | Sweeping and Mopping of common area like stairs, landing, passage, head room etc of all newly constructed Residential Blocks & 6 Nos Room, Kitchen, dininig, store and verandah of OTC & OTC hall and disposal of any waste materials at designated place as instructed by Engineer-in-charge. |
| 310 | Sweeping & washing/cleaning of all types of Roof and Parking area of all newly constructed Residential Blocks , new substation roof & entire roof top of existing type I & type II residential qtrs, OTC, service complex, shopping complex and security posts along with top of projections like windows, ventilators, doors and grill opening [materials to be paid seperately] and disposal of rubbish, waste etc. Each operation should be completed within a week as directed by Engineer-Incharge. |
| 311 | Through Cleaning of A Type quarters at the time of shifting / other occasions including washing of floors, cleaning of mirrors, wash basin, kitchen sink, drain board, kitchen platform and disinfecting toilets, dusting of doors, windows, cupboard shelves and removing cob web including disposal of waste material etc complete as per the instruction of Engineer-Incharge. |
| 312 | Through Cleaning of B Type quarters at the time of shifting / other occasions including washing of floors, cleaning of mirrors, wash basin, kitchen sink, drain board, kitchen platform and disinfecting toilets, dusting of doors, windows, cupboard shelves and removing cob web including disposal of waste material etc complete as per the instruction of Engineer-Incharge. |
| 313 | Through Cleaning of C Type quarters at the time of shifting / other occasions including washing of floors, cleaning of mirrors, wash basin, kitchen sink, drain board, kitchen platform and disinfecting toilets, dusting of doors, windows, cupboard shelves and removing cob web including disposal of waste material etc complete as per the instruction of Engineer-Incharge. |
| 314 | Through Cleaning of D Type quarters at the time of shifting / other occasions including washing of floors, cleaning of mirrors, wash basin, kitchen sink, drain board, kitchen platform and disinfecting toilets, dusting of doors, windows, cupboard shelves and removing cob web including disposal of waste material etc complete as per the instruction of Engineer-Incharge. |
| 315 | Daily collection of household wastes from individual units inside the colony complex & disposal of the wastes outside the complex at specified place within the lead of 1Km as directed by the authorised incharge of the work. Ground Floor |
| 316 | First Floor |
| 317 | Second Floor |
| 318 | Third Floor |
| 319 | Fourth Floor |
| 320 | Disposal of dead animals including digging of pits & covering with earth etc as per direction of the authorised incharge of the work.Rate is inclusive of all cost of labour inclusive of minimum wages, tools and tackles, consumables, contractor profit etc in complete all respect: Dog. |
| 321 | Cat and Puppy. |
| 322 | Bird etc. |
| 323 | Cleaning of Nahanii trap/ Floor trap of kitchen/bathroom/wash basin etc. including taking out the jali & refixing the same with cement mortar after cleaning including cleaning of outlet pipe. |
| 324 | Removal of blockage of Manhole/Inspection Chamber and sewer line by using Hydro-Ejector Machine (High Pressure Sewer Cleaning Unit), including jetting, suction, flushing and disposal of silt/sludge, complete as per direction of Engineer-in-Charge. |
| 325 | Cutting branches of girth less than 30 cm at height upto 4 m including stacking of serviceable material and disposal of unserviceable material at site as specified by EIC. |
| 326 | Cutting branches of girth more than 30 cm at height upto 4 m including stacking of serviceable material and disposal of unserviceable material at site as specified by EIC. |
| 327 | Cutting branches of girth less than 30 cm at height from 4m upto 10 m including stacking of serviceable material and disposal of unserviceable material at site as specified by EIC. |
| 328 | Cutting branches of girth more than 30 cm at height from 4m upto 10 m including stacking of serviceable material and disposal of unserviceable material at site as specified by EIC. |
| 329 | Cutting branches of girth less than 30 cm at height above 10 m including stacking of serviceable material and disposal of unserviceable material at site as specified by EIC. |
| 330 | Cutting branches of girth more than 30 cm at height above 10 m including stacking of serviceable material and disposal of unserviceable material at site as specified by EIC. |
| 331 | Providing services for various miscellaneous nature of unskilled work as & when required as per direction of Engineer-in-charge. |
| 332 | Carrying out anti mosquito & pest control inside residential complex, minimum one semi skilled manpower for colony on every working day for two years : (A) Anti larval operation inside the colony for open catchment area and open drains with Barcelo twice in a month. (Total two operations in a month). (B) Mechanical spraying in residential / non residential units with Malathion 50 EC. One operation each in the month of June, Sept., December and March. (Total four operations in a year) including elimination of adult mosquito and pests such as Lizards,cockroach etc. (C) Mechanical spraying in residential/ non residential units with K-Othrine 2.5% flow. One operation each in the month of July, Oct., January and April. (Total four operations in a year) including elimination of adult mosquito and pests such as Lizards, cockroach etc. (D) Outdoor fogging , misting of non residential areas inside the colony premises with kingfog once in a week i.e Total four operations in a month. (E) Snake control treatment in each units with Titatox or Carbolic acid during rainy season and as per requirment and instruction of EIC. (F) Rodent control treatment inside qtrs. with anticoagulate cake as per requirement and instruction of EIC. |
| 333 | Supply of Materials:- Barcelo |
| 334 | Malathion |
| 335 | K-OTHIRINE |
| 336 | KING FOG |
| 337 | Anticoagulant cake |
| 338 | Carbolic acid |
| 339 | Titatox |
| 340 | Diesel |
| 341 | Petrol |
| 342 | Safe removal of beehives including cost of material, machinary, manpower all complete as per instruction of the Engineer-in-charge |
| 343 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 344 | Providing and displaying of Areca Palm having ht. 1.20 m to 1.50 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 345 | Providing and displaying of Croton Baby Golden Punctatum Aureum having ht. 23 cm to 30 cm, well developed with fresh and healthy foliage in 15 cm size of Earthen pot/Plastic pot. As per direction of the officer-in-charge. |
| 346 | Providing and Displaying Dahlia single in different colour with fresh & healthy foliage well developed with 6 to 8 half blooming buds in 20 cm Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge. |
| 347 | Providing and Displaying Marigold jaffri dwarf in different colour well developed with fresh & healthy foliage with 12 to 15 flowers in full bloom specimen plant 23 to 30 cm ht. in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 348 | Providing and Displaying Kochia well developed fresh & healthy 20 to 25 cm ht. lush green well shaped in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 349 | Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flowers / flower buds in 20 cm Earthen pot / Plastic pot as per direction of the officer-in-charge. |
| 350 | Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-incharge. |
| 351 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 352 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm |
| 353 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 354 | Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-in-charge. |
| 355 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 356 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge : Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm. |
| 357 | Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on approprite place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid seperately.) : Size of Empty Pots 15cm Top dia, 8cm Bottom Dia & 15cm Perpendicular height. |
| 358 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge: MPs accommodation and Govt. officers bungalows. (1Mali for 1.25 Acre). |
| 359 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge : Play grounds / Public parks (1Mali for 2.00Acre). |
| 360 | Maintenance of cement potted plants at ground floor in flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge (For of Cement pots 300 no) |
| 361 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) : Trees Plant |
| 362 | Removal of garden waste by TATA 407 or equivalent including loading/ unloading and carriage upto 1 km lead,complete disposal upto designated place as per direction of officer-incharge. |
| 363 | Pruning, trimming, shaping of trees /shrubs (ht 15 feet and above) i/c removal of cut materials upto 50mt. Lead, as per direction of officer in charge. T&P shall be arranged by the contractor. |
| 364 | Providing of fertilizers, pesticides and insecticides. Urea 40% |
| 365 | b) DAP |
| 366 | c) Neem Khalli |
| 367 | d) Rose Powder |
| 368 | e) Biozen |
| 369 | f) Roger( Dimethoate 30% EC) |
| 370 | Providing Ceramic pots of specified size,all complete as per direction of Officer-in-charge : Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm. |
| 371 | Providing and planting seasonal flower plants (small size) as per instruction of EIC : Anteniam, Verbena, Panjee, Piureya, Gajerlaya, Salvea, Dalieaya, snow ball, Guldowdie, Merry-gold, Genia, Sunflower, Malsome, Galadeaya, Rudbeckia, Kareyofsis, Kossmoss, Star, Seleseha, Kasskom, Purchulka as per instruction of EIC. |
| 372 | Total impact of GST for the purpose of CTC |
| 373 | PART B FOR TOWNSHIP ELECTRICAL(without ITC) |
| 374 | Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2x1.5 sq.mm + 1x1.5 sq.mm earth wire. |
| 375 | Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2x2.5 sq.mm + 1x2.5 sq.mm earth wire |
| 376 | Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2x4 sq.mm + 1x4 sq.mm earth wire. |
| 377 | Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2x6 sq.mm + 1x6 sq.mm earth wire |
| 378 | Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in the existing surface/recessed steel / PVC conduit as required. 3 x 1.5 sq.mm |
| 379 | Supplying and fixing piano/flush type switch/socket on the existing switch box/cover including connections etc. as required : 5/6 amps switch |
| 380 | Supplying and fixing piano/flush type switch/socket on the existing switch box/cover including connections etc. as required : 15/16 amps switch |
| 381 | Supplying and fixing piano/flush type switch/socket on the existing switch box/cover including connections etc. as required : 3 pin 5/6 amps socket outlet |
| 382 | Supplying and fixing piano/flush type switch/socket on the existing switch box/cover including connections etc. as required : 6 pin 15/16 amps socket outlet |
| 383 | Supplying and fixing modular type switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required : 5/6 amps switch |
| 384 | Supplying and fixing modular type switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required : 15/16 amps switch |
| 385 | Supplying and fixing modular type switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required : 3 pin 5/6 amps socket outlet |
| 386 | Supplying and fixing modular type switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required : 6 pin 15/16 amps socket outlet |
| 387 | Supplying and fixing modular type switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required : 2 way 5/6 amps switch |
| 388 | Supplying and fixing modular type switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required : Bell push (Switch) |
| 389 | Supplying and fixing stepped type Modular Fan regulator(2 module) on the existing modular plate switch box including connection but excluding modular plate etc. as required. |
| 390 | Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. (each set consists 3 numbers). |
| 391 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A |
| 392 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.Group B |
| 393 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required. |
| 394 | Supplying and fixing of call bell/buzzer suitable for single phase, 230 volts, complete as required. |
| 395 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single pole |
| 396 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single pole and neutral |
| 397 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as requiredTriple pole and neutral |
| 398 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
| 399 | Supplying and fixing Bell push switch on the existing switch box/cover including connections etc. as required |
| 400 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required |
| 401 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 A |
| 402 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A |
| 403 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A |
| 404 | Providing and fixing 36 kA, 125 amps four pole rating and breaking capacity and pole MCCB with thermomagnatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel ,making connections etc. as required . |
| 405 | Providing and fixing 36 kA, 250 amps four pole rating and breaking capacity and pole MCCB with thermomagnatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel ,making connections etc. as required . |
| 406 | Providing and fixing 50 kA, 400 amps four pole rating and breaking capacity and pole MCCB with thermomagnatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel ,making connections etc. as required . |
| 407 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required: a) Upto 35 sq. mm |
| 408 | b) Above 35 sq. mm and upto 95 sq. mm |
| 409 | c) Above 95 sq. mm and upto 185 sq. mm |
| 410 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required :Upto 35 sq. mm |
| 411 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required: a) 4X10SQMM (25 mm) |
| 412 | b) 4X16SQMM (28 mm) |
| 413 | c) 4 cx 25 sqmm (28 mm) |
| 414 | d) 4 cx 35 sqmm (32 mm) |
| 415 | e) 4 cx 50 sqmm(35 mm) |
| 416 | f) 3½ cx 70 sqmm(38 mm) |
| 417 | g) 3½ cx 95sqmm (45mm) |
| 418 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. : upto 120 sq mm |
| 419 | supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 6.6/11 KV grade as required : 70 sq. mm |
| 420 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 sq. mm |
| 421 | Supply of AL Lugs of different sizes : 25 sq.mm |
| 422 | Supply of AL Lugs of different sizes : 120 sq.mm |
| 423 | Supply and fixing Junction boxes/ Cable end boxes for 6 Way TPN DD DB (Out door) |
| 424 | Supply and fixing Junction boxes/ Cable end boxes for 4 Way TPN DD DB (Out door) with connector. |
| 425 | Supply and Fixing of 63 AMPS \\"c\\" series MCB TPN 440VOLTS, 10kAmps with connections, testing and commisioning etc as required for inductive loads TPN 63A |
| 426 | Supply and fixing of top 6 Amp. |
| 427 | Supply and fixing of top 16 amp. |
| 428 | Supply and fixing of 24/25 W,230V batten LED Tube light. |
| 429 | Supply and Fixing of 15 W LED BULB, 6500K with integrated electronic driver |
| 430 | Supply and Fixing of 15 W LED downlighter, 6500K with integrated electronic driver etc complete with all fixing accessories required |
| 431 | Supply and fixing of AC Single phase Electronic Kwh Energy meter of rating 5-30 A, Class 1.0, 240V, 50Hz Counter type display with transparent Hinge type Box. |
| 432 | Supply and fixing of on the existing board 15/16 Amps S/S combined |
| 433 | Supply and fixing of wooden board of different sizes with backelite sheet on top. 4\\"x4\\" |
| 434 | Supply and fixing of wooden board of different sizes with backelite sheet on top. 7\\"x4\\" |
| 435 | Supply and fixing of wooden board of different sizes with backelite sheet on top. 8\\"x6\\" |
| 436 | Supply and fixing of wooden board of different sizes with backelite sheet on top. 8\\"x10\\" |
| 437 | Supply and fixing of 48W LED street light driver circuit |
| 438 | Supply and fixing of 240-250W LED Area Light driver circuit |
| 439 | Supply and installation 250 Watt flood light in existing pole |
| 440 | Supply and installation 400 Watt flood light in existing pole |
| 441 | Supply, Installation, Testing & Commissioning of LED street light fitting of 60 watt capacity with bracket, Clamp & nut bolts, etc as required. |
| 442 | Repairing & Rewinding of Ceiling Fan including replacement of bearing/bush etc. as required, dismantling & fitting(24 months) |
| 443 | Replacement of 2.5 mfd ceiling fan condenser(24 months) |
| 444 | Repairing of BLDC Ceiling Fan (without Remote model) |
| 445 | Repairing of BLDC Ceiling Fan with replacement of PCB Kit only |
| 446 | Repairing of BLDC Ceiling Fan with replacement of BLDC Motor FAN MOTOR (INCLUDING PCB KIT) with bearing/Bush |
| 447 | Repairing & Rewinding of Exhaust Fan(upto 300mm) including replacement of bearing/bush etc. as required, dismantling & fitting (24 months) |
| 448 | Replacement of 5 mfd exhaust fan condenser(24 monthS) |
| 449 | Repairing & Rewinding of 250mm Fibre body exhaust fan including replacement of bearing/bush etc. as required, dismantling & fitting (24 months) |
| 450 | Comprehensive, AMC ,(without compresser)of 22 nos, 2 TON,5 star Inverter Split AC’s installed at OTC, Camp, etc.(24 months) : a) Ac Servicing with JET pump |
| 451 | b) Gas Charging R32 |
| 452 | c) Voltas/Godrej Make Fan motor, Fan Blade replacement & fitting |
| 453 | d) Voltas/Godrej Make PCB Indoor and Outdoor |
| 454 | Comprehensive, AMC of 10 nos, Geysers installed at OTC etc.(24 months) : a) Supply and fixing of Geyser Heating Element, 230V, 2000W |
| 455 | b) Supply and fixing of Geyser Thermostat, 230V |
| 456 | c) Supply and fixing of Geyser Overload, 230V |
| 457 | d) Supply and fixing of Geyser Indicating Lamp, 230V |
| 458 | Comprehensive, AMC of LAN installed at CMPDI OFFICE & RD Bunglow etc.(24 months): a) Supply and Fixing of 4 PORT SWITCH |
| 459 | b) Supply and Fixing of 8 PORT SWITCH |
| 460 | c) Supply and Fixing of RJ 45 Connector |
| 461 | d) Supply and Fixing of CAT-6 cable |
| 462 | e) Servicing Charge |
| 463 | Tree trimming pre Mansoon & post Mansoon. |
| 464 | Estimate of manpower all three shift for Opertaion, hourly meter recordings, continous monitoring of relays and swicth gear (HT<) of electrical substation of colony, cleaning and upkeeping of swicthyard and, day to day electrical breakdown rectification works of township establishment, monthly recording of energy meters of all executive quarters, shopping complex and its quarters for billing, Electrical safety & proper shutdown during monthly tree trimming work in the campus, street lights checking and swicthing works, operation of lifts, air conditioners, DG set etc as required time to time and other allied works as per the instruction of EIC of township establishment etc as required at RI VI,CMPDI (One electrician with helper in all three shift for 24 months. |
| 465 | Total impact of GST for the purpose of CTC |
| 466 | PART C FOR OFFICE BUILDING CIVIL (with ITC) |
| 467 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. :Granite of any colour and shade: Area of slab upto 0.50 sqm |
| 468 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. :Granite of any colour and shade:Area of slab over 0.50 sqm |
| 469 | Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick. Granite of any colour and shade |
| 470 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shadecomplete. |
| 471 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately): Sal wood |
| 472 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). |
| 473 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 18 mm thick. (For Display board purpose as per direction of EIC). |
| 474 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. :30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 475 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 476 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia |
| 477 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :100X58X1.90 mm |
| 478 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :75 x 47 x 1.70 mm |
| 479 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 50x37x1.50 mm |
| 480 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 481 | Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 115 mm |
| 482 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 483 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 50 mm. |
| 484 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 485 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250 x 10 mm |
| 486 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 x 10 mm |
| 487 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete: Twin rubber stopper |
| 488 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-incharge. |
| 489 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete : Triple strip vertical type |
| 490 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. |
| 491 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality : 1.0 mm thick |
| 492 | Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment). |
| 493 | Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete. |
| 494 | Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately). Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 |
| 495 | Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confirming to IS:14587 |
| 496 | Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade- I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge ending tape 2.00 mm thick of approved brand (fittings to be paid separately). Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 25 mm thick confirming to IS:14587 |
| 497 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. : 125 mm |
| 498 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. : 100mm |
| 499 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. : 75 mm |
| 500 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 501 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces |
| 502 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 503 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with : 4.0 mm thick glass panes. |
| 504 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size. Size of Tile 600 x 600 mm. |
| 505 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600 x 600 mm. |
| 506 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. |
| 507 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 508 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
| 509 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 510 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 75 mm |
| 511 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm |
| 512 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75x75x75 mm Tee with door |
| 513 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110x110x110 mm Tee with door |
| 514 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm (with/without door) |
| 515 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm (with/without door) |
| 516 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain) 75 mm |
| 517 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm |
| 518 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. : 75 mm. |
| 519 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. : 110 mm |
| 520 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 521 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 522 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. : 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\" ) as specified. |
| 523 | Cement Plaster: 12 mm cement plaster mix. 1:6 (1 cement: 6 coarse sand) |
| 524 | Neat cement punning |
| 525 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 526 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 527 | Applying priming coat : With ready mixed aluminium primer approved brand and manufacture on resinous wood & plywood. |
| 528 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 529 | Painting with superior synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 530 | Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 531 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 532 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 533 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 534 | Painting with superior synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work |
| 535 | Painting with aluminium paint of approved brand and manufacture to give an even shade : One or more coats on old work |
| 536 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 537 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement : 4 coarse sand) |
| 538 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty : Float glass panes of thickness 4 mm. (Weight not less than 10 kg / sq.m) |
| 539 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
| 540 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm. |
| 541 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar |
| 542 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 543 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. |
| 544 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 545 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 546 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 547 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 548 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. |
| 549 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. |
| 550 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 551 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm |
| 552 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge |
| 553 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 554 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid |
| 555 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe: 32 mm dia |
| 556 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 557 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 558 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 559 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 560 | Providing and fixing toilet paper holder : C.P. brass |
| 561 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
| 562 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms |
| 563 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 564 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 565 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 566 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 567 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 568 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 15 mm nominal dia Pipes. |
| 569 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 20 mm nominal dia Pipes |
| 570 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 25 mm nominal dia Pipes |
| 571 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 32 mm nominal dia Pipes |
| 572 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 40 mm nominal dia Pipes |
| 573 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. : 50 mm nominal dia Pipes |
| 574 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.:15 mm nominal outer dia Pipes |
| 575 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.:20 mm nominal dia Pipes |
| 576 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.:25 mm nominal dia Pipes |
| 577 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 25 mm nominal outer dia Pipes |
| 578 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 32 mm nominal dia Pipes |
| 579 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 40 mm nominal dia Pipes |
| 580 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 50 mm nominal dia Pipes |
| 581 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 65 mm nominal dia Pipes |
| 582 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 80 mm nominal dia Pipes |
| 583 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. : 100 mm nominal dia Pipes |
| 584 | Providing and fixing gun metal gate valve with C. I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 585 | 20 mm nominal bore |
| 586 | 32 mm nominal bore. |
| 587 | 40 mm nominal bore |
| 588 | 50 mm nominal bore |
| 589 | 65 mm nominal bore |
| 590 | 80 mm nominal bore |
| 591 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore |
| 592 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore |
| 593 | 20 mm nominal bore |
| 594 | 25 mm nominal bore |
| 595 | Providing and fixing uplasticised PVC connection pipe 30 cm length with brass unions : 15 mm nominal bore |
| 596 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 597 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter. Class I |
| 598 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 599 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. |
| 600 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 601 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 602 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore. |
| 603 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 604 | Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 605 | Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 606 | Providing and fixing PTMT pillar cock of approved quality and colour : 15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 607 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.: 25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 608 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 609 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length. |
| 610 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms. |
| 611 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 612 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 613 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides. |
| 614 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) |
| 615 | With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 616 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With stainless steel cover plate minimum 1.25 mm thickness |
| 617 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width. |
| 618 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 619 | Providing White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS : 2556 for replacement work as per direction of Engineer in charge. |
| 620 | Providing Flush pipe with union spreaders and clamps all in C.P. brass for single stall urinal. |
| 621 | Providing C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 50 mm dia |
| 622 | Providing & fixing chrome plated brass long nose/Swan neck pillar cock, having foam flow technology of reputed brand etc. 15 mm nominal bore. |
| 623 | Removing, cleaning/washing of office large curtains and refixing in place including carriage complete as per instruction of EIC. |
| 624 | Day to day Misc. Repair & maintenance of water supply and sanitary system for smooth running of the system by semi skilled plumbing 'Mistry' and unskilled helper with all necessary instruments and equipments excluding materials to be replaced which will be supplied by the 'Institute', but including supply of materials like washers, serews, G. I. bolts & nuts, jute packing, jute/rubber/synthetic gascades, clamp hook, sealant, water tight paints for pipe joints, fixing clamps, small brackets and other incidental sundries required to complete the work as per direction of Engineer-in-Charge. |
| 625 | Day to day misc repair and maintenance of wooden/aluminium/MS doors, windows, chowkhats, shutters, cabinet, wardrobes, partition etc and allied fittings/ fixtures for proper operation by semi skilled carpentary 'Mistry' and unskilled helper with all necessary tools, plants, tackles and equipments, excluding major material/components to be replaced which shall be supplied by the 'Institute' but including minor materials like screws, nails, bolts and nut, washer, adhesive, synthetic resin, sand paper, filler, putty, sealant and other incidental sundries required to complete the work as per direction of Engineer in charge. |
| 626 | Providing Health Faucet with CP Tube & Hook set of minimum 1 m long of. 15 mm nominal bore |
| 627 | Providing EPDM rubber / neoprene gasket etc. in aluminium door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in-charge . |
| 628 | Providing and fixing radium base with radium letter writing over existing finished M.S. sheet, including supply of approved quality retro-reflective radium sheet of required colour and shade, cutting of letters/graphics as per approved design, pasting over properly cleaned and prepared M.S. surface with suitable adhesive, including surface preparation, alignment, fixing, finishing, all labour, materials, tools & tackles etc. complete as per direction of Engineer-in-Charge. |
| 629 | Providing and fixing Sun control film on the sunfacing windows and doors of Garware brand (100–150 micron)/ISI Marked |
| 630 | Providing medium size lock |
| 631 | Providing and fixing self-adhesive frosted glass film of minimum 100 microns thickness, approved make, on existing glass panels including cleaning of glass surface, cutting to required size, proper application using suitable tools, removal of air bubbles, finishing edges neatly and complete in all respects as directed by Engineer-in-Charge. |
| 632 | Providing and supplying curtains of approved fabric, shade and colour, of required size, including stitching as required, complete as per direction of Engineer-in-Charge. |
| 633 | Providing & fixing CP pillar cock. 15mm nominal bore |
| 634 | Providing and supplying 14 inch diameter ceramic flower pot, decorative type, of approved colour, shape and design, including cost of all materials, loading, unloading, transportation to site and placing in position complete as per direction of Engineer-in-Charge. |
| 635 | Providing float valve for cistern |
| 636 | Providing G I bend/ elbow 15mm dia |
| 637 | Providing G I bend/ elbow- 25mm dia |
| 638 | Providing G.I sockets - 15mm |
| 639 | Providing G.I sockets - 25mm |
| 640 | Providing G.I tees - 15mm |
| 641 | Providing G.I tees - 25mm |
| 642 | Providing C.I. Bracket for wash basin and sinks as per instruction of EIC. |
| 643 | Providing Stainless steel jali 100mm as per direction of Engineer in charge |
| 644 | Providing Gun metal Ball valve 15mm as per direction of EIC |
| 645 | Providing brass gear for bib/stop/pillar cock 15mm nominal bore as per direction of EIC |
| 646 | Providing C.P. brass 2 in 1 quarter turn bib cock of approved quality as approved by Engineer-In-Charge. 15 mm nominal bore |
| 647 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992: Fittings: Vent Cowl 110 mm |
| 648 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992: Fittings: 110 X 110 P Trap : 75mm |
| 649 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992: Fittings: 110 X 110 S Trap : 75mm |
| 650 | Supply of UPVC SWR pipe (Type B) confirming to IS:13592 for waste connection as per direction of Engineer in charge. 110mm. |
| 651 | Sweeping/cleaning of floors inside office building including staircase, glass panes, windows and doors (excluding toilet/ washroom, lift, electrical room and sub-station) and security post including dusting of all table, chair, computers, self, almirah, file cabinet, partions, etc. collection and lifting of garbage/ waste from floors and dustbin and dumping it in a waste land/dumping yard outside the office compound including collection, carriage and disposal of garbage manually or mechanically daily as per instruction of EIC. |
| 652 | Moping/washing of floors inside office building including staircase (excluding toilet/ washroom, lift, electrical room and sub-station) and security post using detergent and phenyl (Detergent and phenyl paid separately) as per requirement daily complete as per per instruction of EIC. |
| 653 | Sweeping/cleaning of open pavements, open garrages and garrage shed out side office of office building,daily including collection and disposal of garbage manually or mechanically and disposal of waste in suitable dumping area out side office as per instruction of EIC. |
| 654 | Cleaning of all types of drains and removal/disposal of sludge/garbage from these drains to a specified place once in a week as per instruction of EIC. |
| 655 | Cleaning all open areas in office building premises excluding road area, garrage area, garrage shed area, sub station area and drain area daily as per instruction of EIC. |
| 656 | Cleaning/sweeping of sloping/flat roofs of the office building (excluding solar panel area), portico, garrage, sub station and security post including disposal of waste at specified place outside of office building premisses per month as per instruction of EIC. |
| 657 | Cleaning of toilet/ wash room using suitable material such as detergent, phenyl,colin, toilet cleaner etc (Materials to be paid separetly) including all w.c.pan, urinal, wash basins and mirror etc. daily. |
| 658 | Watering maintaining of flower beds, flower pots, lawn etc. including operation of pump and filling water in roof top storage tank daily including providing gardening equipments as per instruction of EIC. |
| 659 | Cleaning of Roof top water tank of office building once in six month as per instruction of EIC. |
| 660 | Supply of materials (Qty. Of materials should be supplied proportianately average consumption per month):- Phenyl (Black) |
| 661 | Phenyl (White) |
| 662 | Colin |
| 663 | Detergent |
| 664 | Phenyl goli |
| 665 | Seek Jhadu |
| 666 | Mopping cloth |
| 667 | Duster |
| 668 | Phool Jhadu |
| 669 | Odonil |
| 670 | Harpic |
| 671 | Bleaching powder |
| 672 | Liquid Hand wash |
| 673 | Anticoagulant cake (Ratkill) |
| 674 | Room freshner (Odonil brand) |
| 675 | Safe removal of beehives including cost of material, machinary, manpower all complete as per instruction of the Engineer-in-charge |
| 676 | Total impact of GST for the purpose of CTC |
| 677 | PART D FOR OFFICE BUILDING ELECTRICAL (with ITC) |
| 678 | Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2x1.5 sq.mm + 1x1.5 sq.mm earth wire. |
| 679 | Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2x2.5 sq.mm + 1x2.5 sq.mm earth wire |
| 680 | Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2x4 sq.mm + 1x4 sq.mm earth wire. |
| 681 | Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2x6 sq.mm + 1x6 sq.mm earth wire |
| 682 | Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in the existing surface/recessed steel / PVC conduit as required. 3 x 1.5 sq.mm |
| 683 | Supplying and fixing piano/flush type switch/socket on the existing switch box/cover including connections etc. as required : 5/6 amps switch |
| 684 | Supplying and fixing piano/flush type switch/socket on the existing switch box/cover including connections etc. as required : 15/16 amps switch |
| 685 | Supplying and fixing piano/flush type switch/socket on the existing switch box/cover including connections etc. as required : 3 pin 5/6 amps socket outlet |
| 686 | Supplying and fixing piano/flush type switch/socket on the existing switch box/cover including connections etc. as required : 6 pin 15/16 amps socket outlet |
| 687 | Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. (each set consists 3 numbers). |
| 688 | Wiring for light point / fan point/exhaust fan /call bell point with 1.5 sqmm FR PVC insulated,copper conductor, single core cable in surface/recessed steel / PVC conduit , with piano type switch , phenolic laminated sheet,suitable size M.S. box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc as required. Group A - 3 mtrs |
| 689 | Wiring for light point / fan point/exhaust fan /call bell point with 1.5 sqmm FR PVC insulated,copper conductor, single core cable in surface/recessed steel / PVC conduit , with piano type switch , phenolic laminated sheet,suitable size M.S. box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc as required. Group B - 4 mtrs |
| 690 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required. |
| 691 | Supply and fixing of following C-series, 10 kA MCBs (Make - Havells, HPL, Siemens, Legrand). Single pole 6-32 A. |
| 692 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Make - Havells, HPL, Siemens, Legrand). Double pole 6-32A |
| 693 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Make - Havells, HPL, Siemens, Legrand). TPN - 32A |
| 694 | Supply and fixing of backelite angle/batten/pendent Holder (Anchor or equivalent). |
| 695 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required |
| 696 | Supplying and fixing of metal box of 180 mmx100mmn x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps.socket outlet and 15/16 amps. piano type switch connection , painting etc. as required. |
| 697 | Supplying and fixing metal box of 75 mm X 75 mm X 60 mm deep on surface or in recess with suitable size of phenolic laminatedsheet cover in front including painting etc. as required. |
| 698 | Supplying and fixing metal box of 100 mm X 100 mm X 60 mm deep on surface or in recess with suitable size of phenolic laminatedsheet cover in front including painting etc. as required. |
| 699 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. ELCB 40A |
| 700 | Providing and fixing 36 kA, 125 amps four pole rating and breaking capacity and pole MCCB with thermomagnatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel ,making connections etc. as required . |
| 701 | Providing and fixing 36 kA, 250 amps four pole rating and breaking capacity and pole MCCB with thermomagnatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel ,making connections etc. as required . |
| 702 | Providing and fixing 50 kA, 400 amps four pole rating and breaking capacity and pole MCCB with thermomagnatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel ,making connections etc. as required . |
| 703 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required : Upto 35 sq. mm |
| 704 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required: a)4 cx 35 sqmm (32 mm) |
| 705 | b) 4 cx 50 sqmm(35 mm) |
| 706 | c) 3½ cx 70 sqmm(38 mm) |
| 707 | d) 3½ cx 95sqmm (45mm) |
| 708 | supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 70 sq. mm |
| 709 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 70 sq. mm |
| 710 | Supply of AL Lugs of different sizes : 25 sq.mm |
| 711 | Supply of AL Lugs of different sizes : 120 sq.mm |
| 712 | Supply and fixing Junction boxes/ Cable end boxes for 6 Way TPN DD DB (Out door) |
| 713 | Supply and fixing Junction boxes/ Cable end boxes for 4 Way TPN DD DB (Out door) with connector. |
| 714 | Supply and Fixing of 63 AMPS \\"c\\" series MCB TPN 440VOLTS, 10kAmps with connections, testing and commisioning etc as required for inductive loads (Make - Havells, HPL, Siemens, Legrand). TPN 63A |
| 715 | Supply and fixing of top 6 Amp. Make - Anchor or equivalent. |
| 716 | Supply and fixing of top 16 amp. Make - Anchor or equivalent. |
| 717 | Supply and laying of 1.1 KV grade armoured aluminium cable of following sizes including connections etc as required and instructed by EIC (Make - Havells or equivalent). 2 core 6 sq.mm |
| 718 | Supply and fixing of on the existing board 15/16 Amps S/S combined (anchor or equivalent). |
| 719 | Supply and fixing of wooden board of different sizes with backelite sheet on top. 4\\"x4\\" |
| 720 | Supply and fixing of wooden board of different sizes with backelite sheet on top. 7\\"x4\\" |
| 721 | Supply and fixing of wooden board of different sizes with backelite sheet on top. 8\\"x6\\" |
| 722 | Supply and fixing of wooden board of different sizes with backelite sheet on top. 8\\"x10\\" |
| 723 | Supply and fixing of 48W LED street light driver circuit complete for repairing |
| 724 | Supply and fixing of 45 W LED Street lighting luminarie (make bajaj,philps or equivelent.) |
| 725 | Supply and fixing of LED post top/gate light, IP65cast aluminium housing, suitable for entry with fixing bolts 15 Watts in existing 50 mm OD pipe CMPDI Office boundry/Gate |
| 726 | Supply and fixing of Type 2 photovoltaic 600/800 volt DCsurge protective device in existing panel |
| 727 | Supply of XLPE insulated and PVC sheathed power cable of 1.1 kV grade, 1.1 kV, multi core, aluminum,armored , Conforming to IS 7098-2 : a) 4 cx 25 sqmm |
| 728 | b) 4 cx 10 sqmm |
| 729 | CAMC of RO water purifier in bulit with water cooler (50 ltr/ph) installed at CMPDI office-04 nos. & OTC guest house 02 nos.(24 months) Rs-20990.00 per machine per year |
| 730 | Hiring and fixing of LED Jhalar light for decoration of CMPDI office in 05 ocassions (days)per years as per instruction of EIC) |
| 731 | Repairing(including winding) of Water supply pumps, motors, starters (02 nos 15 HP pump & 02 nos 25 HP pump) and 02 nos 7.5 HP submerible pump, motor winding, starters repairing with dismantling & installation. (24 months) : a) Rewinding of Monoblock Motor 25 HP |
| 732 | b) Bearing 6309 |
| 733 | c) Bush KDS+ |
| 734 | d) Repairing of Impeller Of Monoblock Pump 25 HP/15 HP |
| 735 | e) Opening, fitting, servicing & varnishing for 25 HP/15 HPMonoblock Motor |
| 736 | f) Rewinding of Monoblock Motor 15 HP |
| 737 | g) Bearing 6307 |
| 738 | h) Mechanical Seal 15 HP |
| 739 | i) Repairing of 7.5 HP submerible pump, motor winding, with dismantling & installation including lowering |
| 740 | j) Repairing of Starter 7.5 HP Submersible Pump(MK-1) |
| 741 | k) Repairing of Starter 25 HP Monoblock Pump(ML-4) |
| 742 | l) Repairing of Starter 15 HP Monoblock Pump(ML-2) |
| 743 | Repairing of Internal Telephone line for office and Security gates : a) Supply and fixing Telephone hand set |
| 744 | b) Supply and Laying of Telephone cable 4 pair CAT-6 LAN |
| 745 | Hiring of 04 nos Air cooler(2400 CuM/Hr,Desert Steel Body Cooler within one year age equipment) for Year2026-03 Month, Year2027-6 Month, Year2028-3 Month =12 Month |
| 746 | Repairing & Rewinding of Ceiling Fan including replacement of bearing/bush etc. as required, dismantling & fitting(24 months) |
| 747 | Replacement of 2.5 mfd ceiling fan condenser |
| 748 | Repairing & Rewinding of Exhaust Fan(upto 450mm) including replacement of bearing/bush etc. as required, dismantling & fitting (24 months) |
| 749 | Replacement of 5 mfd exhaust fan condenser |
| 750 | Estimate of manpower in General shift for Opertaion, hourly meter recordings, continous monitoring of relays and swicth gear (HT<) of electrical substation of office, cleaning and upkeeping of swicthyard and solar panels, day to day electrical breakdown rectification works of office establishment, Electrical safety & proper shutdown during monthly tree trimming work in the campus, street lights checking and swicthing works, operation of lifts, air conditioners, DG set etc as required time to time and other allied works as per the instruction of EIC of office establishment etc as required at RI VI,CMPDI (One electrician with helper in General shift for 24 months) |
| 751 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender