Tender For Power Supply Of 3.3 Kv And 415 V To Railway Siding No. 5 For Operation Of 5 Nos. Fog Cannons And Lighting, Including Shifting Of Transformer, Etc., To Railway Siding No. 5, Providing Lighting Along The Newly Constructed Coal Transporting R
Tender Value
1.10 Crore
Estimated cost
Bid Submission
07 Oct 2026
14 days left
EMD
1.37 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anugul → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Power Supply Of 3.3 Kv And 415 V To Railway Siding No. 5 For Operation Of 5 Nos. Fog Cannons And Lighting, Including Shifting Of Transformer, Etc., To Railway Siding No. 5, Providing Lighting Along The Newly Constructed Coal Transporting Road Up To Railway Siding No. 3 & 4 (3.5 Km) And Repairing Of 12 Nos. Of Angle Lighting Tower Of Ananta Ocp, Jagannath Area.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of 11KV grade,3 core, 240 sqmm,XLPE, Aluminium HT Cable(Requirement: Strandedd Compacted Circular Aluminium Conductor,Conductor Scrren with Executed Semi Conducting Compund,XlPE Insulated,Insulation Scrrening with Extruded Semi Conducting Compund in Combination with Copper Tape,Cores Laid up,Innersheath of PVC,Galvanised Steel Flat Strip Armoured,& Overall PVC Sheathed Cable Conforming to IS 7098 (Part-2) ) |
| 2 | Installation, laying, commissioning & testing of 3-Core, 11kV grade, 240 sq mm XLPE cable with Horizontal Directional Drilling (HDD) method through 200 mm HDPE pipe (PN-8, PE-80) casing including jointing of HDPE pipe, pit making for machine placement etc. (At a depth of 3 m below railway track and maximum up to 6 m).(Including the cost of HDPE pipe:Code-2895). |
| 3 | Supplying & fixing of medium class G.I. pipe of 150mm dia.(nominal) 8 meters length along the pole with nut & bolts and clammps for rising of cables as required. |
| 4 | Dismantling of overhead lines comprising of copper/aluminium over head conductor, G.I wire, cross arms, insulators etc as required. |
| 5 | Dismantling of pole/street light standard/strut embedded in cement concrete foundation etc. as required. |
| 6 | Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required. |
| 7 | Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required. |
| 8 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holesfor insulator pins etc (as per drawing) and painting with primer and finished paint as reauired. |
| 9 | Supplying of channel iron 75mm X 40mm X 6mm (7.14kg per meter) crosee arm for 4 wire over head line complete with clamps,bolts,nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required. |
| 10 | Erection of angle iron /channel iron cross arm on wood / RCC/ PCC/ steel tubular/rail pole etc. As required. |
| 11 | Supplying and erection of galvanished 'D' iron clamps complete with shackle insulator (100 mmX 110 mm), GI bolts, nuts and washer, coach screws etc as required. |
| 12 | Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required |
| 13 | Supplying and fixing of 32 mm dia X 2.00 meters long GI. Pipe (medium class) bracket for mounting of flurescent / HPMV/ HPSV street light fitting on pole including bending the pipe to the required shape , 2 nos 40 mm X 3 mm flat iron clamps with nuts , bolts and washer , painting the flat iron with primer and finish paint etc. as required. |
| 14 | Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter and above including binding etc. as required. |
| 15 | Erection of all aluminium conductors of 7 / 1.96 to 7/3.10mm diameter including binding etc. as required. |
| 16 | Supplying and erection of 11 KV polymer pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. |
| 17 | Supplying and erection of 11 KV polymer disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. |
| 18 | Supplying of channel iron 75mm X 40mm X 6mm (7.14kg per meter) pole top brackets/cross arms for single 11KV overhead line conductor complete with 50mmX6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and washers etc ( as per drawing) and painting with primer and finish paint as required. |
| 19 | Supplying of channel iron 75mm X 40mm X 6mm (7.14kg per meter) pole top brackets/cross arms for two 11KV overhead line conductors complete with 50mmX50mmX6mm angle iron bracket welded to the channel iron and complete with 50mmX6mm flat iron clamp, bolts and nuts including drilling holes for insulator pins, bolts and washers etc ( as per drawing) and painting with primer and finish paint as required |
| 20 | Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required. |
| 21 | Supplying of two lenghts of channel iron 75mm X 40mm X 6mm (7.14kg per meter) double pole cross arms for three wire 11KV overhead line conductors complete with through bolts and nuts for clamping to the poles, 50mmX6mm M.S. flats welded on one side to the channel iron and with nuts and bolts to the other sides for tying to cross arms together including drilling holes for insulator pins/fittings, bolts and washers etc ( as per drawing) and painting with primer and finish paint as required. |
| 22 | Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required. |
| 23 | Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts,nuts, washers etc. as required. |
| 24 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) ( 20mtr for one earth pit X 150nos earth pit = 3000mtr) |
| 25 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 26 | Painting of One Lighting pole & bracket with Painting with aluminium paint of approved brand and manufacture to give an even shade . (10 Mtr. Long) |
| 27 | Numbering of the pole by painting a long of 2 ft length of all surface with synthetic enamel paint of approved brand. |
| 28 | Clamps, bolts, nuts etc. |
| 29 | Supplying and fixing of 11 KV 630 Amp double break flat type GOAB switch (horizontal) complete set with nuts bolt, drill holes, gas cutting & necessary arrangement. |
| 30 | Supplying and erection of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) 11.18 MTR at pole/structure for installation of one nos GOAB Switch with necessary arrangement. |
| 31 | Supply and fixing of 40 mm dia. G.I. pipe (medium class) for GOAB operating long pipe with necessary arrangement as required. |
| 32 | Aluminium lugs for 70 sq. mm cable |
| 33 | Aluminium lugs for 95 sq. mm cable |
| 34 | Aluminium lugs for 120 sq. mm cable |
| 35 | Supplying and making out door cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 70 Sqmm |
| 36 | Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 70 Sqmm |
| 37 | Cutting of pole with V shape for making of smooth reducing of 6\\" to 4 \\" dia for jointing, straitening, hammering for making of pole. |
| 38 | Welding by gas or electric plant including transportation of plant at site etc. complete.Measurement: 250 mm X 6 row = 1500 mm, 80 mm X 3 nos = 240 mm Total = 1740 mm, For 20 nos pole = 20 X 1740 = 34800mm=3480cm |
| 39 | Trimming of tree branches, cutting of trees, bushes and vegetations along the HT power feeders (OH Lines) of Ananta OCP up to 3mtrs of either side of the feeders to minimise power cuts/faults with 4 person including cutting accessory. |
| 40 | Transportation of all tubular poles from the regional store to the Ananta pole storage location, and from the Ananta pole storage location to the field as and when required. The truck will be provided by the department. |
| 41 | Supplying of 9 Mtrs. long 300Kgs weight PSC pole |
| 42 | Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. Above 8.0 metre and upto 11.0 metre |
| 43 | Supplying, making, installation, testing and commissioning of street light control panel including all accessories like 3 pole 100 amp power contactor, TPMCCB rated 150 A, 16 KA, Timer switch, bakelite connector, ring terminals(10-10), 100 Amps 4 pole RCCB,6 Amp Piano switch, fuse, 6 sq.mm copper wire, indication lamp, lugs, clamps & nut bolts for necessary connection as required in sheet steel enclouser . SCOPE OF WORK:One timer switch arrangement consists of 1 no. M.S.Box 2 ft (length) X 2 ft (width) X 1 ft (depth) 1mm plate containing 1 door with 2nos. M.S.hinges (100X58X1.9 mm), M.S.hasp(90 mm), 2 pc M.S.rain shed (630 X 210 X 1 MM), 4 no. M.S.Shed supports ( 25 X 25 X 3 MM), 4 no. M.S.leg plate ( 150 X 150 X 1 MM) and 4 no. M.S.legs (50 X 50 X 6 MM) for fitting of 3 pole 100 amp power contactor, TPMCCB rated 150 A, 16 KA, Timer switch, bakelite connector, ring terminals(10-10), 100 Amps 4 pole RCCB,6 Amp Piano switch, fuse, 6 sq.mm copper wire, indication lamp, lugs, clamps & nut bolts for necessary connection as required.. |
| 44 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Scope of work: Repairing of 16mtr high lighting tower , Febrication and erection (i) MS angle 65 X 65 X 5mm ;1.5m X 20pcs X 12nos Towers X 4.9 kg/mtr= 1764KG (ii) Chequred Plate 6mm = 2m X 2m X 12 nos X47.1kg/sqm=2260.8 kg ; 0.75m X 2m X 4pcs X12nos X47.1kg/sqm=3391.2kg Total=7416kg+148.32(cutting losses 2%)=7564.32kg |
| 45 | Dismantling :60% of Fabrication , i.e. 7416 kg X60%= 4449.6kg |
| 46 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender