Tender For Construction Of Blt & Ec At Newly Demarcated Aho Office -Cum- Nursery C Us At Nuagada In Gajapati District
Tender Value
25.54 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
14 days left
EMD
25600
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gajapati → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Blt & Ec At Newly Demarcated Aho Office -Cum- Nursery C Us At Nuagada In Gajapati District
BOQ
| Sl. No. | Item Description |
| 1 | Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge |
| 2 | Filling foundation and plinth with sand well watered and rammed including cost and conveyance of materials. |
| 3 | C.C.(1:4:8) with 4 c.m. size h.g. metal in F&P. |
| 4 | Cement Concrete (1:2:4) with 12mm size Hard Granite Chips (Crusher broken) as DPC. |
| 5 | Brick work with CB bricks inC.M(1:6) in foundation and plinth |
| 6 | Filling in foundation and plinth with excavated materials including watering and ramming |
| 7 | Brick work with CB bricks inC.M(1:6) in Super structure in Ground Floor |
| 8 | Brick work with CB bricks inC.M(1:6) in Super structure 1st Floor |
| 9 | RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting by using vibrator ramming for ground floor |
| 10 | (a) Plinth Band |
| 11 | (b) Column base, frustum |
| 12 | (c) Lintel |
| 13 | (d) Column above plinth |
| 14 | (e) Roof beam |
| 15 | (f) Sun shade, loft and Chajja |
| 16 | (g) Roof Slab |
| 17 | (h) Stair |
| 18 | RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting by using vibrator ramming for 1st floor |
| 19 | (a) Column and beam |
| 20 | (b) Lintel |
| 21 | (c) Sun shade, loft and Chajja |
| 22 | (d) Roof slab |
| 23 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in ground floor |
| 24 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in first floor |
| 25 | Finishing wall surfaceof walls withAcrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. Ground Floor |
| 26 | Finishing wall surfaceof walls withAcrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. First Floor |
| 27 | 20mm thick cement plaster in C.M(1:6) over stone work |
| 28 | 16 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in ground floor |
| 29 | 16 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in first floor |
| 30 | 12 mm thick cement plaster in c.m(1:6) over brick masonry, out side walls ground floor |
| 31 | 12 mm thick cement plaster in c.m(1:6) over brick masonry, outside walls first floor |
| 32 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work in Ground floor |
| 33 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work in first floor |
| 34 | Priming 1 coat with any approved Primer. in ground floor |
| 35 | Priming 1 coat with any approved Primer. in first floor |
| 36 | Finishing walls with Plastic Emulsion paint of approved shade two coat to give an even shade including cost of paint in ground floor |
| 37 | Finishing walls with Plastic Emulsion paint of approved shade two coat to give an even shade including cost of paint in first floor |
| 38 | Finishing walls with weather coat paint of approved shade two coat to give an even shade including cost of paint in ground floor |
| 39 | Finishing walls with with weather coat paint of approved shade two coat to give an even shade including cost of paint in first floor |
| 40 | Fitting tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of Vitrified tiles in Ground Floor |
| 41 | Fitting tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of Vitrified tiles Vitrified tiles in Ground Floor |
| 42 | Fixing of glazed ceramic tiles in dado, skirting and risers of steps on 12mm thick cement plaster in mortar (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles in Ground Floor |
| 43 | Fitting tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of Chequered tiles in Ground Floor |
| 44 | Fitting tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of Chequered tiles in Ground Floor |
| 45 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 46 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 47 | Supply, fitting and fixing of MS grill and ventilators including painting two coats over a coat of primer including cost of transportation. |
| 48 | Priming one coat with any approved red oxide over steel work |
| 49 | Painting 2coats with any approved iron paint on new iron work. |
| 50 | Supplying fitting and fixing of FRP door frame of size 75X100mm including drilling holes in Masonry walls |
| 51 | Supplying fitting of Factory made single Leaf Regid FRP composite door Shutter of 32mm thick,Laminated with GRP skins with wood grain finished fabricates using UV stabilised Isopthalic Gel Coat and layer of 450gsm E-glass chopped strand mat(csm) impregnated with Orthopathalic,Polyster resin including fitting all fixtures like hings,towerbolt,handle,aldrop with cost,conveyance and taxes of all materials and labour complete |
| 52 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification |
| 53 | Internal Electrification |
| 54 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) (Cost for 1 point) |
| 55 | Group-A |
| 56 | Group-B |
| 57 | Group-C |
| 58 | Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required. (15/16 amp switch) |
| 59 | Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required. (5/6 amp switch) |
| 60 | Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required. (3 pin 5 / 6 amp socket outlet) |
| 61 | Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required. ( 6 pin 15 / 16 amp socket outlet) |
| 62 | Recessed wiring to sub-main in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth as required. (Make of wire - Finolex/L&T/Anchor/Havells/VGuard) (Cost for 50 m) |
| 63 | Recessed wiring to sub-main in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth as required. (Make of wire Finolex /L&T /Anchor /Havells /VGuard) (Cost for 50 m) |
| 64 | Recessed wiring to sub-main in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth as required. (Make of wire Finolex /L&T /Anchor /Havells /VGuard) (Cost for 50 m) |
| 65 | Recessed wiring to sub-main in 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth as required. (Make of wire Finolex /L&T /Anchor /Havells /VGuard) (Cost for 50 m) |
| 66 | Recessed wiring to sub-main in 4 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth as required. (Make of wire Finolex /L&T /Anchor /Havells /VGuard) (Cost for 50 m) |
| 67 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required. |
| 68 | Providing and fixing of earth bus of 50 mm x 5 mm copper strip ISI marked on surface for connection etc as required. |
| 69 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. |
| 70 | Labour for fixing fan hooks in existing R.C. ceiling |
| 71 | Installation,TestingandCommissioning of pre-wired fluorescent fiiting /compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. |
| 72 | Supplying and fixing of 3 pin, 5 amp ceiling rose ISI marked on the existing junction box / wooden block including connection etc. as required |
| 73 | Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto30cm) with1.5sq.mm FR PVC insulated single core multistrand copper conductoretc. including providing and fixing phenolic laminated sheet steet cover on the fan box etc as required. |
| 74 | Installation,Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5sq.mm FR PVC insulated single core multistrand copper conductor,earthing the regulator as required. |
| 75 | Installation, testing and commissioning of 200 mm (8 inch) Exhaust Fan for Bathroom in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required. |
| 76 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) (4 WAY, SINGLE DOOR) |
| 77 | Supply and fixing of 5 amp to 32 amp rating 240 V \\"B\\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required (SINGLE POLE NEUTRAL) |
| 78 | Supply and fixing of following rating double pole 240 V isolator in the existing MCB DB ISI marked complete with connection testing and commissioning etc. as required. (40 amp) |
| 79 | Supply, Installation, Testing, and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge. Make SEIMENS/ HPL/ ANCHOR/ L&T/ HAVELS/ C & S/ RK (32 Amp DP) |
| 80 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 81 | Extra for using salt and charcoal for G.I or copper plate earth electrode as required |
| 82 | Providing and fixing of copper tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) |
| 83 | Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required. |
| 84 | PH & Sanitation |
| 85 | Supplying all materals,labours, taxes and tools and plants for fittings and fixing of PVC pipes,class- confirming to ASTM-D-1785/89(Sch-80) and pipe fittings of the following nominal bore with clamps fittings including making good the wall,ceilling and floor,testing all complite as per specification and direction of the Engineer -in-charge. |
| 86 | 25 mm dia PVC Pipe |
| 87 | Supplying all materals,labours, taxes and tools and plants for fittings and fixing of CPVC pipes, confirming to IS:15778 having thermal stability for hot &cold water supplay,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m specing, with jointing the pipes with CPVC solvent cement and testing the joints complete as per specification and direction of the Engineer -in-charge. |
| 88 | 25 mm dia CPVC Pipe |
| 89 | Cutting grooves in pucca floors and walls for taking CPVC pipe s and making good the damages as per specification and direction of the Engineer -in-charge. |
| 90 | Cutting holes through existing brick work for taking CPVC pipe s and making good the damageswith cement morter (1:6) as per specification and direction of the Engineer -in-charge. |
| 91 | Cutting holes through existing in R.C.C. Floors and roofs upto 19 cm. for taking CPVC pipe s and making good the damageswith cement voncrete (1:2:4) as per specification and direction of the Engineer -in-charge. |
| 92 | Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Bib cock(Tapes)/CPittings of the following ISI approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge. |
| 93 | 15 mm dia CP Brass Short Body Bib cock . |
| 94 | 15 mm dia CP Brass long body Bib cock . |
| 95 | 15 mm dia CP flanges |
| 96 | Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Stop cock / CPittings of the following IS:781-1995 approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge. |
| 97 | 15 mm dia CP Brass Stop Cock |
| 98 | 15 mm dia CP Pillar Cock |
| 99 | Supplying, fitting, fixing of 15 mm dia CP concealed stopcock etc. Complete. |
| 100 | Supplying all materils,labour,T&P and fixing Rotational moulded polithylene cylindrical vertical water storage tanks (SYNTEX)conforming to IS 12701-1996 Including cutting holes through the tank and fixing mild steel tubes and fittings and providinng extra socket and jam nuts,fixing ball valave etc,including hoisting up to a height of extra 5 Meters above ground level and placing the tank to the required position etc, all as per speci fication and directionof the Engineer incharge. |
| 101 | 1000 liter capacity Syntex/FC Tank |
| 102 | Supplying, fitting, fixing of 15mm dia. PVC connection pipe for pillar cock, supply mains for wash basin etc. Complete. Supplying, fitting, fixing of 15mm dia. PVC connection pipe for pillar cock, supply mains for wash basin etc. Complete. |
| 103 | Supplying all materials,labour,T&P and fitting, fixining following PVC items and filling of the following outside diameter conformoring to IS 13592 Type A, to walls with seal ring conforming to IS:5382,leaving 10 mm gap for 10mm thermal expansion,(1) single socket pipes as per manufactures specification testing, all complite as per specification and directionof the Engineer incharge. |
| 104 | 75 mm dia U-PVC Soil, Waste, Rainwater pipes |
| 105 | 75 mm dia UPVC door Tee |
| 106 | 75 mm dia UPVC door bend |
| 107 | 75 mm dia UPVC plain Tee |
| 108 | 75 mm dia UPVC Cowl |
| 109 | 75 mm dia UPVC plain bend |
| 110 | 110 mm dia UPVC pipe (4 kgf/cm 2 ) |
| 111 | 110 mm dia UPVC door Tee |
| 112 | 110 mm dia UPVC door bend |
| 113 | 110 mm dia UPVC plain Tee |
| 114 | 110 mm dia UPVC plain bend |
| 115 | 110 mm dia UPVC Cowl |
| 116 | Supplying all materials,labour,T&P and fitting, fixining ,laying in trenches High Density Polythine pipes conforming to IS-4984-1995 and specials of the following outside diameter conformoring to Class 1 to Class 3 and jointing by fusion welding method including testing as per manufactures specification testing, all complite as per specification and directionof the Engineer incharge (Earth work in trenches measured separately). |
| 117 | 110 mm dia H.D.Pvc Pipe |
| 118 | Supplying all materials,labour,T&P and fitting, fixining of white glazed vitreous china sqatting pan of size 580 mm x 440 mm size duly embedded in cement concrete (1:4:8) using hard granite metal 4 cm. nominal size and cement mortar (1:1),cutting the floor and mending good the damages etc,all complite as per specification and direction of the Engineer incharge |
| 119 | 580 mm x 440 size White glazed Virtious Odisha pattern squating pan Pan (Parry wire/Hindu stan make) |
| 120 | Supplying all materials,labour,T&P and fitting, fixining of Wash down water Closest (Europian type W.C pan) with Integral\\"S\\" or \\"P\\" trap conforming to IS 2556:Part 8-2004, to the floor with Wooden Plug And Chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc,,all complite as per specification and direction of the Engineer inchargr.(Without Seat &Cover) |
| 121 | White Vitreous China EWC Pattern with \\"P\\" Trap |
| 122 | Supplying all materials,labour T &P Fitting of 10 liters capacity PVC L L flushing Cistern with manually controlled device(handle lever) conforming to IS :7231,etc all complite as per specification and direction of the Engineer incharge. . |
| 123 | 10 Liters P.V.C.low level Flushing Cystern |
| 124 | Supplying all materials,labour T &P Fitting of Plastic Seat and cover for wash down water closet with cromium plated brass hinges and rubber buffer etc all complite as per specification and direction of the Engineer incharge. . |
| 125 | White Plastic Seat &cover with CP Brass Hinges |
| 126 | Supplying all materils,labour, T&P fitting,fixing of Long Bowl Pattern Urinal conforming to IS 2556: Part 6-1996 including connectiont the Urinalof Angle back 450x375x350 mm sizes respectvely with waste pipe by means of white cement(lead) mixed with chopped hemp etc ,as per specification and direction of the Engineer -in-charge |
| 127 | Virtious China -Angle Back Urinal of 450mm x 375 mmx 350 (Parryware/Hindustan) |
| 128 | Supplying all materils,labour, T&P fitting,fixing of glazed earthenware Ladies urinal (squating plate) of size 600 mm x 350 mm conforming to IS:2556-Part-6-1995 with integral longitudinal flushing pipe including embedding the plate 25mm cement morter (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal etc ,as per specification and direction of the Engineer -in-charge |
| 129 | Ladies urinal (Virtious china sqatting plate urinal) size 600mmx350 mm |
| 130 | Supplying all materils,labour, T&P fitting,fixing of Virtious China flat Wash basin over sizes 550 mm x 400 mm with hole for pillar taps conformoing to IS 2556 : Part 4-2004 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 131 | Virtious China flat wash basin of 550mm x 400 mm (Parryware/Hindustan) |
| 132 | Supplying all materils,labour, T & P fitting,fixing of PVC waste pipe for wash basin or sink i.e Flexiable (Coil shaped) PVC Waste pipe 40mm dia with length not less than 700 mm with PVC waste fittings etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 133 | Flexible (coil shaped) PVC waste pipe for sink & wash basin 32 mm dia with 900 mm long waste fittings |
| 134 | Supplying all materils,labour, T&P fitting,fixing of CP brass towel rail wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 135 | 25 mm dia x 600 mm long. |
| 136 | Supplying all materils,labour, T&P fitting,fixing of plate glass shelf with CP brass brackets wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 137 | 120 mm x600 mm |
| 138 | Supplying all materils,labour, T&P fitting,fixing of bevelled type plate glass mirroor with wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 139 | 600 mm x 450mm |
| 140 | Supplying all materils,labour, T&P fitting,fixing of Cp soap Holder standard sizewith wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 141 | Supplying all materils,labour, T&P fitting,fixing of CP brass towel ring wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 142 | CP Brass Towel Ring |
| 143 | Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CP Brass Shower rose with CP revolving Shower with 15 to 20 mm inlet & 150 mm dia etc compliteas per specification and direction of the Engineer -in-charge. |
| 144 | Supplying all materials,labour and fixing of Brass Full Way Valve conforming to IS: 781-1995 of the 32 mm Full way Valves including all taxes etc complite as per direction by Engineer in charge. |
| 145 | Supplying all materials,labour and fixing of Brass Full Way Valve conforming to IS: 781-1995 of the 25 mm dia brass ball Valve including all taxes etc complete as per direction by Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender