Tender For Restoration Of Damaged Infrastructures Due To Cyclonic Storm At Ocpl Manoharpur Coal Mines Sarbahal, Hemgir, Sundargarh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
21 days left
EMD
46000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Damaged Infrastructures Due To Cyclonic Storm At Ocpl Manoharpur Coal Mines Sarbahal, Hemgir, Sundargarh
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Brick work in cement mortar including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres, including all taxes (excluding GST), all labour, scaffolding, sundries and T&P etc. complete as per direction of the Engineer -in-charge. |
| 2 | Dismantling and storage of existing structural steel work in angles, tees, flats, and channels, including all gusset plates, bolts, nuts, cutting rivets, welding, etc, All complete as per the direction of the engineer-in-charge. |
| 3 | Earth work in excavation by manual / mechanical means in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes (excluding GST), sundries and T&P etc all complete as per the direction of Engineer-in-charge. |
| 4 | Filling in foundation, trenches and plinth with river sand in layers not exceeding 20 cm in depth, well-watered and compacted in layers with top surface dressed and levelled to proper gradient including cost of all materials, conveyance, all taxes (excluding GST) and royalties, loading and unloading, including cost of all labour, all taxes (excluding GST), sundries, T & P etc. complete as per directions of the Engineer -in-charge. |
| 5 | Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) ,mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period, including all cost of labour ,material, conveyance, royalties and taxes (excluding GST) , sundries , T&P etc. complete as per the direction of Engineer-in-charge. |
| 6 | Providing steel centering and shuttering(steel plate/ ply board) to required shape and size for all kinds of R.C.C. works, centering materials with all necessary props, bracing, ties and supports with level centering using bituminous paper wherever required, as per the direction of the Engineer -in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes (excluding GST), loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete. |
| 7 | Providing and laying in position machine batched/ machine mixed concrete of M25 grade for reinforced cement concrete work including laying of concrete using 12 mm to 20 mm size crusher broken hard granite chips excluding the cost of centering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability, including cost all materials, conveyance , royalties and taxes (excluding GST), loading and unloading, cost of all labour, sundries, T&P etc. complete as per the design and direction of Engineer-in-charge. |
| 8 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, including cost of all labours, materials, conveyance, loading and unloading, all taxes (excluding GST) and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. |
| 9 | Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even finish with two or more coats on new work over a coat of suitable shade with primer of approved brand and manufacturer's instructions including cost of all materials with taxes (excluding GST) and transportation, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge. |
| 10 | Fabrication, restructuring & commissioning of structural steel work in built up (round, square, rectangular hollow tubes etc.) etc. including cutting, hoisting, fixing in position and painting with one coat of red oxide primer including cost of all material, labours, all consumables, all required plants & machinery etc all complete as per the direction of Engineer-in-charge. |
| 11 | Supplying ,cutting, bending, tying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification including cost of materials, carriage, all taxes etc complete as per the direction of EIC. |
| 12 | Providing & fixing Garware net 50 mm X 50 mm X 2.5 mm with rope 6mm binding & 8mm for border rope including cost of materials, carriage, all taxes etc complete as per the direction of EIC. |
| 13 | Filling excavated earth (excluding rock) in trench, plinth and side of foundation etc. In layer not exceeding in 20cm depth, consolidating each deposit layer by ramming and watering, lead upto 50m and lift upto 1.5mincluding cost of all labours, materials, conveyance, loading and unloading, all taxes (excluding GST) and royalties, sundries and T&P, as per design and direction of the Engineer -in-charge. |
| 14 | Supply and installation of wooden panelled glass door using 8mm thick glass and 60mm X 60mm size wooden frames, partly fixed & partly swing with all required fittings & fixtures, locking system, floor springs etc. complete including all labours, materials, conveyance, loading and unloading, all taxes (excluding GST), as per design and direction of the Engineer -in-charge. Size 80 Sqft. |
| 15 | Installing and fixing in position Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions, for all heights and all levels etc. including cost of all labours, materials, conveyance, loading and unloading, all taxes (excluding GST) and sundries and T&P etc all complete as per direction of the Engineer -in-charge. |
| 16 | Providing & Fixing of 8 mm Thick HPL as Plank Manner having size 10 ft x 4.25 ft on the Back up sub frame structure using Alu. Tube 25x75x2mm in Horizontal and Tube 25x38x2mm in jointer,50x50x50 aluminium bracket, Screw 5.5x25,EPDM black gasket ,Bolt , Fasteners , Backer Rod , Weather Silicon Masking Tape etc including cost of all labours, materials, conveyance, loading and unloading, scaffolding where ever required, sundries and T&P etc all complete as per direction of the EIC. |
| 17 | Supply and Fixing of Samanwaya Bhawan Name display board (ACP Board) including cost of all labours, materials, conveyance, loading and unloading, scaffolding where ever required, sundries and T&P etc all complete as per direction of the EIC. |
| 18 | Repair of Gate at OCPL including cost of all labours, materials, conveyance, loading and unloading, scaffolding where ever required, sundries and T&P etc all complete as per direction of the EIC. |
| 19 | Repair of Porta Cabin at OCPL including cost of all labours, materials, conveyance, loading and unloading, scaffolding where ever required, sundries and T&P etc all complete as per direction of the EIC. |
| 20 | Repair of Hoarding at OCPL including cost of all labours, materials, conveyance, loading and unloading, scaffolding where ever required, sundries and T&P etc all complete as per direction of the EIC. |
| 21 | Repairing of damage Signage logo I Love OCPL including cost of all labours, materials, conveyance, loading and unloading, scaffolding where ever required, sundries and T&P etc all complete as per direction of the EIC. |
| 22 | Installation Charges |
| 23 | Manufacturing and supplying stainless steel retro reflective signage board made out from 3M retro sticker with stainless steel size 3\\"X3\\" round pipe 2 side leg 10feet height will be welded four side stainless steel square pipe size 1\\"X1\\" back supporting frame and 3mm out door Quality ACP Sheet base will be mounted on a back support frame & 3M retro base & letter print complete in all respects as per the direction of Engineer-in-charge. Rates include cost of materials, labour, loading & unloading, taxes (excluding GST) and T&P etc. complete as per the direction of EIC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender