Tender For Supply, Erection, Testing And Commissioning Of Receiving Substation With Incoming Cabling From Grid Substation Including 25 Kv-Ac Traction Cum 33Kv Auxiliary Main Sub- Stations, 25Kv Overhead Equipment (Focs), Auxiliary Power Supply & Othe
Tender Value
986.50 Crore
Estimated cost
Bid Submission
20 Nov 2026
51 days left
EMD
9.86 Crore
Bank guarantee accepted
Document Fee
50000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Erection, Testing And Commissioning Of Receiving Substation With Incoming Cabling From Grid Substation Including 25 Kv-Ac Traction Cum 33Kv Auxiliary Main Sub- Stations, 25Kv Overhead Equipment (Focs), Auxiliary Power Supply & Other Associated Works On Viaduct, At- Grade & Stations Including Soladevanahalli Depot And Scada System Along With Any Modification In Existing Ohe/Psi If Required Along The Alignment For Complete Corridor 2 & Corridor 4 Of Bstp.
BOQ
| Sl. No. | Item Description |
| 1 | “Supply, Erection, Testing and Commissioning of Receiving Substation with incoming Cabling from Grid Substation including 25 kV-AC Traction cum 33kV Auxiliary Main Sub- Stations, 25kV Overhead Equipment (FOCS), Auxiliary Power Supply & Other Associated Works on Viaduct, At- Grade & Stations including Soladevanahalli Depot and SCADA System along with any modification in existing OHE/PSI if required along the alignment for complete Corridor 2 & Corridor 4 of BSTP.” |
| 2 | FC1-EURO |
| 3 | FC2-USD |
| 4 | FC3-JPY |
| 5 | FC4-INR |
| 6 | The Total Name of Work: “Supply, Erection, Testing and Commissioning of Receiving Substation with incoming Cabling from Grid Substation including 25 kV-AC Traction cum 33kV Auxiliary Main Sub- Stations, 25kV Overhead Equipment (FOCS), Auxiliary Power Supply & Other Associated Works on Viaduct, At- Grade & Stations including Soladevanahalli Depot and SCADA System along with any modification in existing OHE/PSI if required along the alignment for complete Corridor 2 & Corridor 4 of BSTP.” Sl.No Description FC1-EURO FC2-USD FC3-JPY FC4-INR |
| 7 | Schedule-A : OHE for Corridor 2 & 4 |
| 8 | Schedule-B : RSS and 220kV EHV Cabling |
| 9 | Schedule-C :ASS |
| 10 | Schedule-D :SCADA Schedule-E :Provisionl Sum 16949152.0 Total 0.0 0.0 0.0 21186440.0 16949153.0 Summary of Schedules Schedule SCHEDULE DESCRIPTION FC1-EUR FC2-USD FC3-JPY FC4-INR A OHE for Corridor 2 & 4 A1 General 0.0 0.0 0.0 0.0 A2 OHE SUPP C2 & C4 0.0 0.0 0.0 0.0 A3 OHE ERECT C2 & C4 0.0 0.0 0.0 0.0 A4 OHE Supply Depot C2 0.0 0.0 0.0 0.0 A5 OHE Erection Depot C2 0.0 0.0 0.0 0.0 A6 Traction Supply ITC C2,C4 (Mainline) 0.0 0.0 0.0 0.0 A7 Traction Supply ,ITC DEPOT C2 0.0 0.0 0.0 0.0 A8 CIVIL WORKS 0.0 0.0 0.0 0.0 A9 OHE SPARES 0.0 0.0 0.0 0.0 A10 Site Design 0.0 0.0 0.0 0.0 A11 Deployment of Manpower during Intervening Period 0.0 0.0 0.0 0.0 A12 Tools & Plants 0.0 0.0 0.0 0.0 A13 Power Block Provision (Fixed Cost) To be quoted in INR ONLY 4237288.0 Total BOQ - CORRIDOR 2 & 4 (OHE) 0.0 0.0 0.0 4237288.0 B BOQ - RSS and 220kV EHV Cabling B1 220kV EHV, 33kV MV and 25kV MV Cables 0.0 0.0 0.0 0.0 B2 220kV GIS RSS 0.0 0.0 0.0 0.0 B3 General Requirement 0.0 0.0 0.0 0.0 Total BOQ - RSS 0.0 0.0 0.0 0.0 C BOQ - ASS C1 ASS C2 & C4 0.0 0.0 0.0 0.0 C2 ASS Depot 0.0 0.0 0.0 0.0 C3 ASS Spare C2 & C4 0.0 0.0 0.0 0.0 Total BOQ - ASS 0.0 0.0 0.0 0.0 D BOQ - SCADA D1 CM1 OCC & BCC 0.0 0.0 0.0 0.0 D2 CM2 RTU 0.0 0.0 0.0 0.0 D3 CM3 Depot RTU 0.0 0.0 0.0 0.0 D4 CM4 SCADA Spares 0.0 0.0 0.0 0.0 D5 CM5 AMC SCADA 0.0 0.0 0.0 0.0 Total BOQ - SCADA 0.0 0.0 0.0 0.0 *E PROJECT PROVISIONAL SUM(Fixed Cost) E1 PROVISIONAL SUM(*) To be quoted in INR ONLY 16949152.0 Total 0.0 0.0 0.0 21186440.0 Schedule A1 - General Requirement A1 GENERAL REQUIREMENT UNIT Qty(A) Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item FC1-EUR FC2-USD FC3-JPY FC4-INR |
| 11 | Training of Employer's staff |
| 12 | Off shore |
| 13 | In India |
| 14 | Maintenance & Operations manuals |
| 15 | Integrated testing & commissioning |
| 16 | Corridor-2 |
| 17 | Corridor-4 |
| 18 | As Built Drawings Total 0.0 0.0 0.0 0.0 Schedule A2 - OHE Supply ITEM No. WORK DESCRIPTION UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item OHE - SUPPLY -C2&C4 FC1-EUR FC2-USD FC3-JPY FC4-INR |
| 19 | Galvanized Steel Masts On Viaduct |
| 20 | 8''x8'' BFB with base plate (BFB/RSJ with Base plate) |
| 21 | B series masts ( B-200 / B-225) with base plate (Fabricated steel mast) |
| 22 | Galvanized Steel Masts At - Grade |
| 23 | 8''x8'' BFB (BFB/RSJ)/ B series masts ( B-150 / B-175) |
| 24 | B series masts ( B-200 / B-225) (Fabricated steel mast) |
| 25 | Galvanized Steel Masts Viaduct, At Grade |
| 26 | Dwarf mast (BFB/RSJ |
| 27 | Two Track cantilever (TTC) |
| 28 | Galvanised Drop Arms supporting OHE at Stations- At Grade ,Portals at At-Grade, Viaduct |
| 29 | Drop Arm 6\\" x 6\\" BFB |
| 30 | Drop Arm 8\\"X6\\" RSJ |
| 31 | Galvanized Steel Portal structures Viaduct /At Grade |
| 32 | Supporting for 3 Tracks (Portal) |
| 33 | Supporting for 4 Tracks (Portal) |
| 34 | Supporting for 6 Tracks (Portal) |
| 35 | Intermediate boom for 3 tracks (Portal) |
| 36 | SPS and associated fitting (Intermediate boom for 3 tracks) |
| 37 | Intermediate boom for 4 tracks (Portal) |
| 38 | SPS and associated fitting (Intermediate boom for 4 tracks) |
| 39 | Intermediate boom for 6 tracks (Portal) |
| 40 | SPS and associated fitting (Intermediate boom for 6 tracks) |
| 41 | Overhead Wires and Conductors |
| 42 | Catenary Wire - 120 sq mm (Cu-Mg) |
| 43 | Contact Wire -150 sqmm (Copper Silver) |
| 44 | Anticreep Wire - 120 sq mm (Cu-Mg) |
| 45 | Feeder Wire 145 Sqmm (Cross/Slack Feeder) |
| 46 | Droppers |
| 47 | Dropper Assembly |
| 48 | 233 sqmm (AAC Spider) Return conductor |
| 49 | Buried Earth Conductor (BEC) ACSR 93.3 SQ mm |
| 50 | Overhead Protection Conductor (OPC) ACSR 93 SQ mm |
| 51 | Cantilever Assembly |
| 52 | For Push-off with composite insulators |
| 53 | For Pull-off with composite insulators |
| 54 | Galvanized Steelwork. |
| 55 | For mounting multiple cantilevers on masts/drop arms etc. |
| 56 | For supporting catenary system/overhead conductors under the roofs at stations |
| 57 | For supporting Return Conductor/OPC/feeders from mast/drop arm |
| 58 | Jumper Assemblies |
| 59 | Between Contact wire and Messenger wire (H) |
| 60 | Between two OHE's.(G), 120 sq mm |
| 61 | Between two OHE's.(F), |
| 62 | Anti Theft Jumper ( ATJ) |
| 63 | Earthing Assemblies |
| 64 | Between OPC and earth / ITL & ITL to ITL |
| 65 | Between BEC and Earth Terminal/ ITL |
| 66 | Between RC and Rail/ ITL |
| 67 | Integral Transversal Link |
| 68 | Earthing Station 1 Electrod Type |
| 69 | Between Station Canopy etc. and Earth Connection Point |
| 70 | Earthing of Viaduct Spans, U-girders connecting pier caps & all interconnections |
| 71 | CAD Welding on Rail |
| 72 | Earthing of Hand Rails/Viaduct Lighting Support |
| 73 | Mast Earthing |
| 74 | Termination Assemblies |
| 75 | Termination assembly for OHE, comprising of one contact wire and one messenger wire/large span wire |
| 76 | Termination of OPC |
| 77 | Termination of Return wire |
| 78 | Feeder Wire (Slack/Cross Feeder) |
| 79 | Anti-Creep Assembly |
| 80 | Guy Rod Assembly |
| 81 | Automatic Tensioning Device Assembly |
| 82 | Automatic Tensioning Device assembly of 5-Pulley Block Type including all fittings, Weight and ATD Cage |
| 83 | Automatic Tensioning Device of Spring Type |
| 84 | Insulator Assembly |
| 85 | Cut-In Insulator Assembly |
| 86 | Post Insulator |
| 87 | Section Insulator Assembly Type I (Suitable for Main line) Set 47.0 |
| 88 | Plates and boards Set for the Catenary System |
| 89 | Number plates |
| 90 | Caution Boards on Masts |
| 91 | Caution Notices at stations |
| 92 | Caution Boards at IOL/power block Limiting Boards |
| 93 | Caution Boards at turnouts |
| 94 | Caution Board for Public at Every Station Stair/Lift/Platform |
| 95 | Engine Stop Board |
| 96 | Safety Screen Panels |
| 97 | Neutral Section Short neutral section assembly(PTFE) Set 18.0 |
| 98 | Insulated Sleeves |
| 99 | Line Cover for catenary |
| 100 | Earth quake sensor + thermal Imaginging Camera |
| 101 | Catenary Monitroing System |
| 102 | Wind Speed Sensor |
| 103 | Anti bird arrangement |
| 104 | Anti Bird Nesting SS net |
| 105 | Anti Bird Disc |
| 106 | Providing of Concrete for Foundations Augering type & grouting in all types of soils using M-20 grade (incl muffs) including nominal reinforcement wherecer required as per RDSO drawings / approved design from KRIDE for Structures / Portals / TTUs / switching stations etc Total 0.0 0.0 0.0 0.0 Schedule A3 - OHE Erection ITEM No. WORK DESCRIPTION UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item OHE Erection |
| 107 | Galvanized Steel Masts On Viaduct |
| 108 | 8''x8'' BFB with base plate |
| 109 | B series masts ( B-200 / B-225) with base plate |
| 110 | Galvanized Steel Masts At - Grade |
| 111 | 8''x8'' BFB/ B series masts ( B-150 / B-175) |
| 112 | B series masts ( B-200 / B-225) with supporting equipment |
| 113 | Galvanized Steel Masts Viaduct, At Grade |
| 114 | Dwarf mast (8x8 BFB/RSJ) |
| 115 | Two Track cantilever (TTC) |
| 116 | Galvanised Drop Arms supporting OHE at Stations- At Grade ,Portals at At-Grade, Viaduct |
| 117 | Drop Arm 6\\" x 6\\" BFB |
| 118 | Drop Arm 8\\"X6\\" RSJ |
| 119 | Galvanized Steel Portal structures for viaduct / At Grade |
| 120 | Supporting for 3 Tracks (SPS & associated fitting) |
| 121 | Supporting for 4 Tracks (SPS & associated fitting) |
| 122 | Supporting for 5/6 Tracks (SPS & associated fitting) |
| 123 | Cantilever Assembly |
| 124 | For Push-off with composite insulators as per Approved drawing |
| 125 | For Pull-off with composite insulators as per Approved drawing |
| 126 | Buried Earth Conductor ACSR 93.3 sq mm , |
| 127 | Return Conductor 233 ( AAC) |
| 128 | Overhead Protection Conductor ACSR 93.3 sq mm |
| 129 | Anticreep Wire -120 sq mm ( Copper Magnesium) |
| 130 | Feeder Wire -145 sq mm |
| 131 | Galvanized Steelwork. |
| 132 | For mounting multiple cantilevers on masts/drop arms etc. |
| 133 | For supporting catenary system/overhead conductors under the roofs at stations |
| 134 | For supporting Return conductor / feeder / any other conductor |
| 135 | Caution Board on the Mast |
| 136 | Caution Boards at IOL / Power Block Limiting Boards |
| 137 | Caution board at the Stations |
| 138 | Caution board at the Turnouts |
| 139 | Caution Board for Public at Every Station Stair/Lift/Platform |
| 140 | Engine Stop Board |
| 141 | Number plate |
| 142 | Overhead catenary system |
| 143 | Contenary wire - 120 sq mm ( Cu Mg) |
| 144 | Contact wire -150 sq mm ( Cu Ag) incl Temporary slewing, if required |
| 145 | Insulated sleeves cover for catenary |
| 146 | Neutral Section Short neutral section assembly (PTFE, at Feeding Post) Set 18.0 |
| 147 | Dropper Assembly |
| 148 | Jumper Assemblies |
| 149 | Between Contact & Messenger wire (H) |
| 150 | Between two OHEs \\"G\\" |
| 151 | Between two OHEs \\"F\\" |
| 152 | Earthing Assemblies |
| 153 | Between BEC & Earth Terminal |
| 154 | Between RC & ITL / Rail |
| 155 | Integral Transverse link |
| 156 | Between Station canopy & earth connection |
| 157 | Earthing connection of viaduct span & segment |
| 158 | Termination Assemblies |
| 159 | Termination assemblies of OHE comprising contact wire & messenger wire |
| 160 | Termination of OPC |
| 161 | Termination of RC |
| 162 | Feeder wire |
| 163 | Anticreep assembly |
| 164 | Guy rod assembly |
| 165 | Automatic Tensioning device assembly |
| 166 | 5-Pulley block |
| 167 | Spring Type ATD |
| 168 | Insulator assembly |
| 169 | Cutin insulator |
| 170 | Post Insulator |
| 171 | Section Insulator Assembly (suitable for Mainline) |
| 172 | Earth quake sensor and Thermal Imaging camera |
| 173 | Catenary Monitroing System |
| 174 | Wind Speed Sensor |
| 175 | Anti Bird Nesting net |
| 176 | Anti bird dic |
| 177 | Installation of concrete Foundations Augering type & grouting in all types of soils using M-20 grade (incl muffs) including nominal reinforcement wherecer required as per RDSO drawings / approved design from KRIDE for Structures / Portals / TTUs / switching stations etc |
| 178 | Testing and Commissioning of Overhaed catenary system |
| 179 | Adjustment of Cantilever & SED as per approved drawing |
| 180 | Tower Wagon checking |
| 181 | Others (Testing & commissioning of OHE system) Total 0.0 0.0 0.0 0.0 Schedule A4 - OHE Supply for Depot ITEM No. DEPOT - SUPPLY UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item A4 FC1-EUR FC2-USD FC3-JPY FC4-INR OHE SUPPLY (SOLADEAVHALLI DEPOT) |
| 182 | Galvanised Steel masts |
| 183 | On Viaduct/Ramp |
| 184 | At Grade and in Depot 1.2.1 8\\" x 8\\" BFB/ B series masts ( B-150 / B-175) MT 11.75 1.2.2 B-200 MT 4.12 1.2.3 Dwarf masts MT 1.0 1.2.4 Drop Arm 6\\" x 6\\" BFB MT 22.62 1.2.5 Drop Arm 8\\"X6\\" RSJ MT 2.17 |
| 185 | Galvanised Steel masts for regulated contact wire only |
| 186 | 8\\"X8\\" BFB |
| 187 | B-200 |
| 188 | Two-track cantilever masts (8.0m boom) |
| 189 | Galvanized Steel Portal Structures |
| 190 | On Viaduct/Ramp |
| 191 | At Grade 3.2.1 For 3 Tracks MT 8.04 3.2.2 For 4 Tracks MT 4.68 3.2.3 For 5/6 Track MT 6.27 3.2.4 Intermediate boom for 3 tracks MT 6.82 3.2.5 SPS and associated fitting (Intermediate boom for 3 tracks) MT 0.73 3.2.6 Intermidiate boom for 4 tracks MT 5.45 3.2.7 SPS and associated fitting (Intermediate boom for 4 tracks) MT 0.42 3.2.8 Intermidiate boom for 5 tracks MT 1.02 3.2.9 SPS and associated fitting (Intermediate boom for 5 tracks) MT 0.12 |
| 192 | Overhead Wires and Conductors |
| 193 | Catenary Wire - 120 sq mm (Cu-Mg) 4.2 a Contact Wire - 150 sq mm ( Cu- Ag0.1) Km 1.75 4.2 b Contact Wire - 107 Sq mm (copper ETP) km 11.0 |
| 194 | Anticreep Wire -120 sqmm (Cu-Mg) |
| 195 | Overhead Protection Conductor (OPC) -93.3 sq mm (ACSR) |
| 196 | Bridle wire 35 sqmm |
| 197 | 5mm Dropper Wire (Electrolytic Hardrawn Type) |
| 198 | Dropper Assembly |
| 199 | RC, BEC and ACSR |
| 200 | Cantilever Assembly |
| 201 | For Push-off with composite insulators - Conventional |
| 202 | For Pull-off with composite insulators - Conventional Tramway |
| 203 | For Push-off with ceramic insulator - Tramway |
| 204 | For Pull-off with ceramic insulator - Tramway |
| 205 | Galvanized Steelwork. |
| 206 | For mounting multiple cantilevers on masts/drop arms etc. |
| 207 | For supporting catenary system/overhead conductors under the roofs at stations |
| 208 | For supporting return conductors/feeders/OPC from mast/drop arm |
| 209 | Jumper Assemblies |
| 210 | Between Contact wire and Messenger wire |
| 211 | Between two OHE's.(G) |
| 212 | Between two OHE's.(F) |
| 213 | Earthing assemblies |
| 214 | Between OPC and Earth terminal |
| 215 | Between BEC and Earth Terminal |
| 216 | Integral Transversal Link |
| 217 | Earthing stations of 1-electrode type |
| 218 | CAD Welding on Rail |
| 219 | Mast Earthing |
| 220 | Termination Assemblies |
| 221 | Single Contact Wire (107 sq.mm) |
| 222 | Single Contact Wire (150 sq.mm) |
| 223 | Termination assembly for OHE, comprising of one contact wire and one messenger wire |
| 224 | Termination for OPC |
| 225 | Anti-creep Assembly |
| 226 | Guy Rod Assembly |
| 227 | Automatic Tensioning Device Assembly |
| 228 | Automatic Tensioning Device assembly of 5-Pulley Block Type including all fittings, Weight |
| 229 | Insulator Assembly |
| 230 | Cut-In Insulator Assembly |
| 231 | Post Insulator |
| 232 | Section Insulator assembly |
| 233 | Type-I (Suitable for Main Line) |
| 234 | Type-II (Suitable for Depot) |
| 235 | Plates and boards for the Catenary system |
| 236 | Number plates |
| 237 | Caution Boards on Masts |
| 238 | Caution Boards at turnouts & unwired turnouts |
| 239 | Other Caution Boards including 'Engine stop' |
| 240 | Safety Screen Panels |
| 241 | Anti Bird Nesting SS net |
| 242 | Anti bird disc(2 NOS) |
| 243 | Detail Design, Supply, Inspection, Transport, Delivery, Installation, Testing and Commissioning at site of Retractable OCS including tools, manuals, Interlocking, spares and Training of personnel (offshore) Total 0.0 0.0 0.0 0.0 Schedule A5 - OHE Erection for Depot ITEM No. DEPOT-ERECTION UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item FC1-EUR FC2-USD FC3-JPY FC4-INR A5 OHE Erection (SOLADEAVHALLI DEPOT ) |
| 244 | Galvanised Steel masts |
| 245 | On Viaduct/Ramp |
| 246 | At Grade and in Depot 1.2.1 8\\" x 8\\" BFB/ B series masts ( B-150 / B-175) Nos. 27.0 1.2.2 B-200 Nos. 9.0 1.2.3 Dwarf masts Nos. 4.0 1.2.4 Drop Arm 6\\" x 6\\" BFB ( For Single Cantilever) Nos. 130.0 1.2.5 Drop Arm 8\\" x 6\\" RSJ ( For Multilever Cantlever) Nos. 10.0 |
| 247 | Galvanised Steel masts for regulated contact wire only |
| 248 | 8\\"X8\\" BFB |
| 249 | B-225 |
| 250 | Two-track cantilever masts (8.0m boom) |
| 251 | Galvanized Steel Portal Structures |
| 252 | On Viaduct/Ramp |
| 253 | At Grade 3.2.1 For 3 Tracks Nos. 11.0 3.2.2 For 4 Tracks Nos. 4.0 3.2.3 For 5 track Nos 5.0 3.2.4 Intermediate boom for 3 tracks Nos. 11.0 3.2.5 SPS and associated fitting (Intermediate boom for 3 tracks) Nos. 11.0 3.2.6 Intermidiate boom for 4 tracks Nos. 4.0 3.2.7 SPS and associated fitting (Intermediate boom for 4 tracks) Nos. 4.0 3.2.8 Intermidiate boom for 5 tracks Nos. 1.0 3.2.9 SPS and associated fitting (Intermediate boom for 5 tracks) Nos. 1.0 |
| 254 | Overhead catenary system |
| 255 | Catenary Wire -120 sq mm ( Cu Mg) |
| 256 | Contact wire -150 sq mm ( Cu-Ag0.1) |
| 257 | Contact Wire -107 sq mm ( Copper ETP) |
| 258 | Anticreep Wire -120 sq mm ( Cu Mg) |
| 259 | Overhead Protection Conductor (OPC) -93.3 sq mm (ACSR) |
| 260 | Bridle wire |
| 261 | 5mm Dropper Wire (Electrolytic Hardrawn Type) |
| 262 | Dropper Assembly |
| 263 | Galvanized Steelwork. |
| 264 | For mounting multiple cantilevers on masts/drop arms etc. |
| 265 | For supporting return conductors/feeders/OPC from mast/drop arm |
| 266 | Buried Earth conductor and Structure Earth Conductor (BEC & SEC) |
| 267 | Cantilever Assembly |
| 268 | For Push-off with composite insulators - Conventional |
| 269 | For Pull-off with composite insulators - Conventional |
| 270 | For Push-off with ceramic insulator - Tramway |
| 271 | For Pull-off with ceramic insulator - Tramway |
| 272 | Jumper Assemblies |
| 273 | Between Contact wire and Messenger wire |
| 274 | Between two OHE's.(G) |
| 275 | Between two OHE's.(F) |
| 276 | Earthing Assemblies |
| 277 | OPC and Earth Terminal |
| 278 | Earthing Terminal 1 Electrod Type |
| 279 | Cad Welding on Rails |
| 280 | Between BEC and Earth Terminal |
| 281 | Integral Transversal Link |
| 282 | Termination Assemblies |
| 283 | Single Contact Wire (150 & 107 sq.mm) |
| 284 | Termination assembly for OHE, comprising of one contact wire and one messenger wire |
| 285 | Termination for OPC |
| 286 | Guy Rod Assembly |
| 287 | Anti-creep Assembly |
| 288 | Automatic Tensioning Device Assembly |
| 289 | Automatic Tensioning Device assembly of 5- Pulley block type |
| 290 | Insulator Assembly |
| 291 | Cut-In Insulator Assembly |
| 292 | Post Insulator |
| 293 | Section Insulator assembly |
| 294 | Number plates |
| 295 | Number Plates |
| 296 | Caution board on Masts |
| 297 | Caution Boards at unwired turnouts |
| 298 | Other Caution Boards including 'Engine stop' |
| 299 | Safety Screen Panels |
| 300 | Anti Bird Nesting SS net |
| 301 | Anti bird Disc |
| 302 | Foundation for Depot OHE Location Foundation ( M15) Grade Cum 1302.0 |
| 303 | Retractable OCS (Erection included in supply item 21 of schedule A4 ) |
| 304 | Testing and Commissioning Total 0.0 0.0 0.0 0.0 Schedule A6 - Traction Supply & Erection (Main line) ITEM No. WORK DESCRIPTION UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item A6 TRACTION - SUPPLY & ERECTION (Mainline) FP&SS C2 & C4 FC1-EUR FC2-USD FC3-JPY FC4-INR |
| 305 | Feeding Post |
| 306 | Cicuit Breakers |
| 307 | Interrupters |
| 308 | Single Pole Motor Operated Isolators ( with earthing Heel) |
| 309 | Measuring and protection Equipment i 25 KV Potential Transformers Set 24.0 ii 25 KV Current Transformer iii 42 KV Lightning Arrester with counter and other accessories Set 24.0 |
| 310 | 25 KV, 3.3. KV Cables |
| 311 | 25 kV Feeder Cable 2.1.1 1 C x 240 sq.mm 25kV Copper Cable (FRLS).including cable cleats Km 2.0 2.1.2 1C x 400 sq mm 25 KV Aluminium cable ( FRLS) including cable cleats Km 48.0 |
| 312 | Return feeder Cable 2.2.1 1 C x 240 sq.mm 3.3 kV Copper Cable (FRLS).including cable cleats Km 2.0 2.2.2 1C x 400 sq mm 3.3 KV Aluminium cable ( FRLS) including cable cleats Km 48.0 |
| 313 | C& M Cables |
| 314 | C & M Cables ( FP, SP, SS, & SSP) |
| 315 | Marshalling box |
| 316 | Jumper Assembly between OHE & Isolator,LBS, Interrupter,CB, feeder & isolator, OHE & LT/BT or similar along with all voltage cable cleats |
| 317 | Sheath Voltage Limiters with Link BOX |
| 318 | Switching Stations (SP, SS & SSP) |
| 319 | Interrupters |
| 320 | Double Pole Motorised Isolators |
| 321 | Measuring and protection Equipment |
| 322 | 25 KV Potential Transformer |
| 323 | 25KV capacitive voltage sensor |
| 324 | 42 KV Lightning Arrester with counter and other accessories |
| 325 | ERECTION |
| 326 | Erection (Feeding Post +/ Switching Stations) |
| 327 | Erection of 25kV,3.3kV cables and C & M cables / wiring |
| 328 | Testing and Commissioning (Feeding Post +/ Switching Station) Total 0.0 0.0 0.0 0.0 Schedule A7 - Traction Supply & Erection for Depot ITEM No. TRACTION - SUPPLY & ERECTIONSOLADEAVHALLI DEPOT UNIT QTY Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item A7 DEPOT ( FP & SSP) FC1-EUR FC2-USD FC3-JPY FC4-INR |
| 329 | 25 KV Switching Equipments |
| 330 | Circuit Breakers |
| 331 | Interrupters |
| 332 | Single Pole Motor Operated Isolators |
| 333 | Single Pole Manually Operated Isolators earth heel |
| 334 | Double Pole Manually Operated Isolators earth heel |
| 335 | Measuring and protection Equipment i 25 KV Potential Transformers Set 10.0 ii 25KV capacitive voltage sensor Set 12.0 iii 25 KV Current Transformer Set 1.0 iv 42 KV Lightning Arrester Set 3.0 v Measuring and protection Equipment other than PT,CS, CT and LA Set 1.0 vi Depot Feeding Gantry Set 1.0 |
| 336 | 25 KV, 3.3. KV Cables |
| 337 | 25 kV Feeder Cable 2.1.1 1 C x 240 sq.mm 25kV Copper Cable (FRLS) Km 1.0 2.1.2 1 C x 400 sq.mm 25 kV Aluminium Cable (FRLS) km 8.0 |
| 338 | Return feeder Cable 2.2.1 1 C x 240 sq.mm 3.3 kV Copper Cable (FRLS) Km 1.0 2.2.2 1 C x 400 sq.mm 3.3 kV Aluminium Cable (FRLS) km 4.0 |
| 339 | Jumper Assembly between OHE & Isolator, feeder & isolator, OHE & LT/BT or similar |
| 340 | C & M Cables |
| 341 | Marshalling box |
| 342 | Wiring |
| 343 | C&M Cables (FP,SP, SS & SSP) |
| 344 | Sheath Voltage Limiters with link box |
| 345 | Erection |
| 346 | Erection (Feeding Post ) |
| 347 | Erection of 25kV,3.3kV cables and C & M Cables/ wiring |
| 348 | Testing and Commissioning (Feeding Post ) Total 0.0 0.0 0.0 0.0 Schedule A8 - Civil Works ITEM No. WORK DESCRIPTION UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item A8 CIVIL WORKS FC1-EUR FC2-USD FC3-JPY FC4-INR |
| 349 | Switching Stations |
| 350 | Provision of flexible PVC pipes to link Marshalling Box outlet to cable trough along viaduct / Atgrade |
| 351 | Provision of flexible HDPE pipes between the Marshalling box and control boxes of pole-mounted switchgears, PT's, CVS, CB, LA, Isolator etc. |
| 352 | Provision of HDPE pipes between Upside and Downside of viaduct to carry connecting cables |
| 353 | Integral Transverse Links- |
| 354 | Provision of HDPE pipes to carry cables across/along track for ITL connections |
| 355 | Cable Paths |
| 356 | From AMS/ASS to ASS and TSS to FP, Depot 3.1.1 Cut and Cover 3.1.1.1 For any of the following combinationsi) 2 circuits of 33kV cables & control cablesorii) 2 circuits of 25kV & 3.3kV cables & Control cables M 24000.0 3.2.1 Pipe in C&C or elsewhere 3.2.1(a) HDPE Pipes 40mm M 1000.0 3.2.1(b) HDPE Pipes 100mm M 1000.0 3.2.1(c) HDPE Pipes 160mm M 1000.0 3.2.2 Pucca Road restoration 3.2.2.1 For any of the following combinationsi) 2 circuits of 33kV cables & control cablesorii) 2 circuits of 25kV & 3.3kV cables & Control cables M 16000.0 3.2.3 Trench Less with HDPE Pipes 3.2.3.1 Trench Less with 100 mm dia pipes M 1000.0 3.2.3.2 Trench Less with 160 mm dia pipes M 1000.0 3.2.4 Nallah Crossing 3.2.4.1 For any of the following combinationsi) 2 circuits of 33kV cables & control cablesorii) 2 circuits of 25kV & 3.3kV cables & Control cables M 8000.0 3.2.4.2 For raising cables from ground to viaduct on a Stand alone structure for all cables. Lot 10.0 |
| 357 | Track crossing for 33 kV cables or 25KV & 3.3KV or C&M cables |
| 358 | On new viaduct 4.1.1 For any of the following combinationsi) each circuit of 33kV cables or,ii) each circuit of 25kV & return cable. Set 10.0 Total 0.0 0.0 0.0 0.0 Schedule A9 - OHE Spares ITEM No.A9 WORK DESCRIPTION UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item a Spares for OHE Main Line (Viaduct & Atgrade) FC1-EUR FC2-USD FC3-JPY FC4-INR |
| 359 | 8''x8'' BFB with & without base plate |
| 360 | B-200 with & without base plate |
| 361 | B-225 with & without base plate |
| 362 | Tubular structures Type-1 incl SPS |
| 363 | Tubular structures Type-2 incl SPS |
| 364 | Drop Arm 6\\" x 6\\" BFB |
| 365 | Drop Arm 8\\"X6\\" RSJ |
| 366 | Drop Arm Channel |
| 367 | M20X65 GI Bolt,Nut,Lock Nut & FW |
| 368 | M20 Tappered Washer |
| 369 | DA Adapter |
| 370 | BFBE 5.35 Mtr |
| 371 | BFBE 4 Mtr |
| 372 | M16X50 GI Bolt,Nut,Lock Nut & FW |
| 373 | Link Plate |
| 374 | Guy rod |
| 375 | Guy Rod double Strap assembly |
| 376 | Cleat Angle |
| 377 | Mast Anchor Fitting |
| 378 | Mast Guy Rod Fitting |
| 379 | M20X280 GI Bolt,Nut,Lock Nut & FW |
| 380 | BFBU Mast Anchor Adopter |
| 381 | BFBU Mast Guy Rod Fitting |
| 382 | M20X380 GI Bolt,Nut,Lock Nut & FW |
| 383 | M16X120 GI J Bolt,Nut,Lock Nut & FW |
| 384 | Fastening for Top Tube Assembly |
| 385 | Mast Bottom Fitting |
| 386 | Backing angle |
| 387 | M16X260 GI Bolt,Nut,Lock Nut & FW |
| 388 | Adopter |
| 389 | Backing angle |
| 390 | M16X220 GI Bolt,Nut,Lock Nut & FW |
| 391 | Mast Top Fitting |
| 392 | MCC RDSO |
| 393 | MCC Clamping angle |
| 394 | OPC & RC suspension clamp |
| 395 | Safety Screen Z Clamp |
| 396 | Safety screen J Clamp for 6x6 DA & 8X6 DA |
| 397 | Safety Screen Panels |
| 398 | M16X65 GI Bolt,Nut,Lock Nut & FW |
| 399 | Nine Tonne Adjuster |
| 400 | Cut-In Insulator Assembly |
| 401 | Post Insulator |
| 402 | Double Eye Distance Rod |
| 403 | Equalising Plate |
| 404 | Double Messenger wire clamp |
| 405 | 25 kV Composite Bracket/Stay Insulator |
| 406 | Bracket U Bolt assembly |
| 407 | Bracket Stay bolt assembly |
| 408 | Registration arm assembly |
| 409 | Wind Stay dropper |
| 410 | Fixation wind stay dropper |
| 411 | Push Arm clamp |
| 412 | Push arm clamp part |
| 413 | Messenger clamp assembly |
| 414 | Copper rivet |
| 415 | SS Thimble |
| 416 | Hook clamp dropper for messenger wire |
| 417 | Eye End dropper |
| 418 | Out Rigger |
| 419 | Connector |
| 420 | PG clamp |
| 421 | M16X30 GI Stud Bolt, nut & SW |
| 422 | M16X50 GI 'L' Bolt, nut & SW |
| 423 | Bus bar Jumper clamp |
| 424 | 95 SQ.MM Aluminium Lug |
| 425 | Number plate clamp for 8x8 BFB mast / B-series / tubular structures |
| 426 | Cautiion Plate clamp for 8x8 BFB mast / B-series / tubular structures |
| 427 | M10 Lead Washer |
| 428 | Mast Number plate fixing SPS |
| 429 | BFBU Mast Number Plate fixing clamp |
| 430 | M10X35 GI Bolt,Nut,Lock Nut & FW |
| 431 | M12X200 GI Bolt,Nut,Lock Nut & FW |
| 432 | Caution 25000Volts |
| 433 | Caution Near By OHE Restricted |
| 434 | Public Caution Board |
| 435 | Staff Caution Board |
| 436 | Electric Engine Stop Board |
| 437 | Clamp connecting 75Sqmm to 125Sqmm |
| 438 | Clamp connecting 75 Sqmm to 164 Sq.mm Crimping type |
| 439 | Clamp connecting 125 Sqmm to 164 Sqmm Jumper wire |
| 440 | Clamp connecting 26 Sqmm to 125 Sqmm Jumper wire |
| 441 | Clamp connecting 26 Sqmm to 5mm dropper wire |
| 442 | Clamp connecting 26 Sqmm to 150 Sqmm Jumper wire |
| 443 | Bend type Steady Arm for IOL |
| 444 | Normal steady arm |
| 445 | PG Clamp OPC |
| 446 | PG clamp 1031 |
| 447 | PG clamp 1041 |
| 448 | PG clamp 1051 |
| 449 | Catenary Wire - 120 sq mm (Cu-Mg) |
| 450 | Contact Wire -150 sqmm (Copper Silver) |
| 451 | Anticreep Wire - 120 sq mm (Cu-Mg) |
| 452 | Feeder Wire 145 Sqmm (Cross/Slack Feeder) |
| 453 | Continuity \\"G\\" 164 sqmm Jumper wire for main line |
| 454 | Termination assembly for OHE, comprising of one contact wire and one messenger wire/large span wire |
| 455 | Termination assembly for Feeder Wire (Slack/Cross Feeder) |
| 456 | Termination assembly for Single Contact Wire (150 sq.mm) |
| 457 | Termination assembly for OPC |
| 458 | Buried Earth Conductor (BEC) |
| 459 | 233 sqmm (AAC spider) Return conductor |
| 460 | Splice Messenger Wire |
| 461 | Splice Contact Wire |
| 462 | Dropper Assembly |
| 463 | Cantilever assembly For Push-off with composite insulators |
| 464 | Cantilever assembly For Pull-off with composite insulators |
| 465 | Jumper Between Contact wire and Messenger wire (H), |
| 466 | Jumper Between two OHE's.(G), |
| 467 | Jumper Between two OHE's.(F), |
| 468 | Jumper (26 sq mm, with MW and ST) |
| 469 | Connection Between OHE Mast and BEC |
| 470 | Connection Between BEC and Earth Terminal (number of Piers *4, ) |
| 471 | Connection Between BEC and Rail (at ITL) |
| 472 | Integral transversal link |
| 473 | Automatic Tensioning Device assembly of 5-Pulley Block Type including all fittings, Weight and ATD Cage with SS rope |
| 474 | Automatic Tensioning Device of Spring Type |
| 475 | Section insulator Type I(Suitable for main line) |
| 476 | Line Cover for catenary |
| 477 | Anti Bird Nesting net |
| 478 | Anti Bird Disc |
| 479 | Section insulator installation tool |
| 480 | Short neutral section assembly(PTFE type) |
| 481 | Neutral section runner (Set of right skid) |
| 482 | Neutral section runner (Set of left skid) |
| 483 | Neutral section PTFE rod |
| 484 | High voltage insulator cleaning paste for NS PTFE rod |
| 485 | Neutral section installation tool |
| 486 | Hand operated hydraullic Crimping tool (with Die set of different sizes) b Spares for OHE Depot |
| 487 | Bracket tramway type |
| 488 | Bridle Wire with all fittings 35sq.mm |
| 489 | Top tube fitting for bracket |
| 490 | Double Pole isolator with mechanism box with earthing heel (manual) |
| 491 | Single Pole isolator with mechanism box (motorized) |
| 492 | Earthing heel spare |
| 493 | Male and female contact of isolator |
| 494 | Arcing Horn |
| 495 | 105sq.mm Jumper Wire |
| 496 | Single strand Dropper wire |
| 497 | Dropper clip for Contact wire RDSO |
| 498 | Dropper clip for Bridle wire RDSO |
| 499 | 50x6mm GI flat strip for structure bond |
| 500 | Automatic Tensioning Device assembly of 5-Pulley Block Type including all fittings, Weight |
| 501 | SS Rope for 5 pulley ATD with ending cone at both end |
| 502 | Centre Bolt for Counter wt. with Nut and locking pin |
| 503 | Ending cone for Feeder wire |
| 504 | 8x8 BFB Mast without base plate |
| 505 | B200 Mast without base plate |
| 506 | B200 /175/225 Mast without base plate |
| 507 | BFBU Mast without base plate with Boom for Portal 'R' type / 5 track |
| 508 | Overhead protection conductor (OPC) 93.3 sqmm ACSR |
| 509 | Termination for OPC |
| 510 | OPC Suspension Clamp |
| 511 | OPC Strain Clamp |
| 512 | Guy rod assembly for depot |
| 513 | Section insulator type 2 suitable for depot |
| 514 | TTC mast assembly |
| 515 | Contact wire 107 sqmm c Spares for Traction Main Line & Depot |
| 516 | Circuit Breakers |
| 517 | Interrupters |
| 518 | SP Isolator (MOTOR Operated) |
| 519 | DP Isolator (Motorised Operated) |
| 520 | PT 30VA |
| 521 | Capacitive voltage sensor |
| 522 | LA 42 kVA |
| 523 | Control card set of BM |
| 524 | L pad of BM |
| 525 | Connector of BM |
| 526 | Earthing heel of Isolator |
| 527 | Male female contacts of isolator |
| 528 | Bimetallic strip |
| 529 | Panel Locks of BM, Castle lockset, Indicating lamps etc |
| 530 | 1 C x 400 sq.mm 25kV Aluminium Cable (FRLS) |
| 531 | 1 C x 400 sq.mm 3.3kV Aluminium Cable (FRLS) |
| 532 | Straight through Joints for 25 kV Cable, |
| 533 | Straight thorugh joints for 3.3 kV Cable, |
| 534 | End Terminations for 25 kV Cable, |
| 535 | End Terminations for 3.3 kV Cable, e Spares for CMV |
| 536 | Complete Cantilever Assembly |
| 537 | Steady Arm Bend Type for main line |
| 538 | Special Type Steady Arm for IOL |
| 539 | ST, BT, RT cap |
| 540 | Automatic Tensioning Device assembly of 5-Pulley Block Type including all fittings, Weight and ATD Cage |
| 541 | Section insulator with accessories (in box) |
| 542 | Inclined dropper |
| 543 | J - Bolt |
| 544 | Span Dropper Wire (Electrolytic hard drawn Cu) |
| 545 | Span dropper assembly of various sizes |
| 546 | Catenary Wire - 120 sq mm (Cu-Mg) |
| 547 | OPC wire |
| 548 | 233 sqmm (AAC spider) Return conductor |
| 549 | Contact Wire -150 sqmm (Copper Silver) |
| 550 | I - sec Steady Arm (High speed) |
| 551 | Bracket Tube fitting |
| 552 | Stay Tube fitting |
| 553 | V Bolt of Guy Rod |
| 554 | Special PG of Section Insulator Total 0.0 0.0 0.0 0.0 Schedule A10 - Site Design ITEM No. WORK DESCRIPTION UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item A10 FC1-EUR FC2-USD FC3-JPY FC4-INR Site Design of OHE |
| 555 | TOTAL OHE |
| 556 | Site Design of OHE 1.1 a Preliminary Design LOT 2.0 1.1 b Final Design LOT 2.0 |
| 557 | Schedule of Materials |
| 558 | As built Drawings Total 0.0 0.0 0.0 0.0 Schedule A11 - Deployment of Manpower during Intervening Period Man Power (Itervening Period)Manpower cost to be deployed by contractor during intervening period between Energisation & Taking Over of OHE till Revenue Operation Date A11 Description of Manpower Minimum Qualification Unit Qty Bidder has to quote in anyone currency only out of FC1,FC2,FC3 & FC4 for one item FC1-EUR FC2-USD FC3-JPY FC4-INR For OHE, Switching stations |
| 559 | CMV engineer / field engineer |
| 560 | Skilled Staff (8 hr shift) |
| 561 | Unskilled Staff (8 hr shift) Total 0.0 0.0 0.0 0.0 Schedule A12 - Tools & Plants TOOLS & PLANT Item NoA12 Items Unit QTY Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item FC1-EUR FC2-USD FC3-JPY FC4-INR |
| 562 | Tirfor 5.0 Tonne/ 3.0 Tonne with 20m steel rope |
| 563 | Pull - lift 3/4 Tonne (with loop type chain) |
| 564 | Come along clamps for catenary suitable for 19/2.108 mm conductor(65) |
| 565 | Come along clamps for catenary wire 120 mm2 |
| 566 | come along clamps for ACSR conductor 93.3 sqmm |
| 567 | come along clamps for ACSR conductor 233.3 sqmm |
| 568 | Come along clamps for contact wire 107 mm2 |
| 569 | Come along clamps for contact wire 150 mm2 |
| 570 | Earth Discharge rod complete (light weight 11 kgs (As per RDSO spec. ETI/OHE/51(9/87) Re. 1, Oct 92 H-6 to be supplied) |
| 571 | Aluminium Straight ladder (8m) with Hook on top |
| 572 | Aluminium Straight ladder extensible (11m) |
| 573 | Drilling machine (25mm) Motor Driven (radial or pillar) |
| 574 | Bench Grinder (Double end) pedastal motor Driven (203 mm) disc |
| 575 | 1Ph portable welding machine only required |
| 576 | Portable Diesel Generating set 3 KVA 240 V, 1Ph |
| 577 | Contact wire Cutter 36 inch |
| 578 | Dropper wire Cutting 12 inch |
| 579 | Single Sleeve pully block 3 1/2\\" x 1/2\\" Groove steel |
| 580 | Single Sleeve pully block 3 1/2\\" x 1/2\\" Groove steel fiber for drawl of contact catenary wire |
| 581 | Single Sleeve pully block 6\\" x 1\\" Groove steel (with top eye to be supplied, cap 2T, asper IS: 13156 of H-18 1991 |
| 582 | Contact wire twist cum bender 6 inch |
| 583 | Steel sling with eye end 19mm dia (a) 1 m Long |
| 584 | Steel sling with eye end 19mm dia (b) 2 m Long |
| 585 | Steel sling with eye end 19mm dia (c) 3 m Long |
| 586 | Steel sling with eye end 19mm dia (d) 4 m Long |
| 587 | Steel sling with eye end 19mm dia (e) 10 m Long |
| 588 | Contact wire Splicing jig |
| 589 | Copper Hammer 2 kg |
| 590 | Metric tape 30 m, 15m each (PVC tape only) |
| 591 | Light weight ladder trolley |
| 592 | Engineering Ratchet |
| 593 | LED Tri colour lamps |
| 594 | Trifor 3 Tonner/2 Tonne |
| 595 | Spring balance 25 kg capacity |
| 596 | Wire claws (Panja) |
| 597 | Crow bar |
| 598 | Shovels |
| 599 | Sledge hammer 10 lb |
| 600 | Tree pruner ( with telescopic handle & saw blade) |
| 601 | 3/4 inch Manila rope 100m |
| 602 | 1/2 inch Manila rope 150m |
| 603 | 1 inch Manila rope 50m long |
| 604 | Manual rail hole drilling Rachet and clamp with chamfering tool |
| 605 | Dynamometer 10-Tonne capacity with carrying box with 150 mm dia with test certificate |
| 606 | High focus LED reachargeble hand torch light. |
| 607 | Walkie Talkiesets ( with 2 km range working on 'c' band) |
| 608 | Megger 2500V |
| 609 | Digital earth clamp megger to be supplied |
| 610 | Light weight Tool Box |
| 611 | Set of tools for Technicians a) DE Spanner set from 6 TO 32 (12 PIECES) |
| 612 | Ring Spanner set 16x17, 18x19, 20x22, 24x26, 30x32, 36x40 |
| 613 | Screw Driver 6 \\" |
| 614 | Screw Driver 12 \\" |
| 615 | Hammer 1/2 lb |
| 616 | Cutting plier |
| 617 | Plumb bob |
| 618 | Hack saw |
| 619 | Spirit Level |
| 620 | Reachargeable 30-watt power LED Flood Lights |
| 621 | Industrial Digital Thermometer |
| 622 | Digital Crane weighing scale with remote display & printer 5 t |
| 623 | Petrol Driven Light Weight Rail Drill machine with 52 kg & 60 kg Rail Adopter and 2 pairs of drills |
| 624 | Portable cutting machine (Hand Held) |
| 625 | Chain Saw 18\\" or 24\\" for tree cutting |
| 626 | Aluminium Ladder 15 mtrs for cross track feeder checking |
| 627 | Oilver G Plus testing kit as per latest RDSO Specification |
| 628 | Electronic Distance measuring equipment up to 500 m clear vision Total Amount Schedule A12 - Tools & Plants 0.0 0.0 0.0 0.0 Name of Work: “Supply, Erection, Testing and Commissioning of Receiving Substation with incoming Cabling from Grid Substation including 25 kV-AC Traction cum 33kV Auxiliary Main Sub- Stations, 25kV Overhead Equipment (FOCS), Auxiliary Power Supply & Other Associated Works on Viaduct, At- Grade & Stations including Soladevanahalli Depot and SCADA System along with any modification in existing OHE/PSI if required along the alignment for complete Corridor 2 & Corridor 4 of BSTP.” (Revision_10) Schedule A13 - Power Block Provision Bill No A13 Power Block Provision S.No Items Unit Amount |
| 629 | Power Block Provision for Corridor 2 |
| 630 | Power Block Provision for Corridor 4 Total Amount Schedule A13 - Power Block Provision 4237288.13 Schedule B1 - 220kV EHV, 33kV MV and 25kV MV Cables Bill no. B1 HVC-S & HVC-E 220kV Cable Unit Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item Item No WORK DESCRIPTION FC1-EUR FC2-USD FC3-JPY FC4-INR |
| 631 | 220 kV Cable |
| 632 | Supply, Delivery, Transportation, Loading and Unloading of 220kV,1000 Sq.mm, single core Aluminum conductor EHV Cable. |
| 633 | Supply and installation of 220kV, 1000 sqmm Aluminum cable Joints. |
| 634 | Supply and installation of 220kV, 1000 sqmm Aluminum cable termination (outdoor type) |
| 635 | Supply and installation of 220kV, 1000 sqmm cable termination (GIS male type & GIS female type to be fixed inside GIS. |
| 636 | Supply and installation of Three phase of Link box with SVL |
| 637 | Supply and installation of Three phase of Link box without SVL |
| 638 | Supply of pilot wire cable/FO Cable armoured indoor /outdoor for comminication (FO cable-48 core,9 fibre or as per approved GTP from Kride) |
| 639 | Erection, Testing & Commissioning of 220kV cabling system |
| 640 | Supply and installation of Link boxes Chambers |
| 641 | Laying of pilot wire cable/FO Cable armoured indoor /outdoor for comminication (FO cable-48 core,9 fibre or as per approved GTP from Kride) including jointing splicing, terminations etc. |
| 642 | Cable Laying, Testing and Commissioning |
| 643 | 220kv cable Laying, through Trenchless, Laying on under ground, in pipes/ducts including cable route Survey.(8.5km) 3.1.1 Detail Route Survey of complete Route Length along with making of trail Pits and making of final As built Drawing Mtrs, 64000.0 |
| 644 | Making of Cable Path 3.2.1 Excavation in all types of soil including dressing, back filling & leveling of trench and dispensing of surplus excavated soil at designated area approved by engineer/employer Mtrs, 57600.0 3.2.2 Supply and Laying of 150 mm wide, 100 micron thick, Warning tape as. per KRIDE approved drawing Meter 57600.0 3.2.3 Supply and Laying of PLB Duct in open trench Meter 57600.0 3.2.4 Supply and spreading of fine river sand Cum 57600.0 3.2.5 Supply and Laying of R.C.C. Cable covering tiles as per KRIDE approved drawing No. 115200.0 3.2.6 Laying of HDPE Pipes by Trenchless method including supply of requisite type of HDPE Pipes (Consisting of 6 numbers 250 mm dia PN6, PE80 pipes for Power Cables, 2 numbers 200 mm dia PN6, PE80 pipes as spare pipes and 2 numbers 110 mm dia PN6, PE80 pipes for control and OFC Cables) Mtrs. 3200.0 3.2.7 Excavation in all types of Soil and laying of HDPE Pipes including supply (Consisting of 6 numbers pipes for Power Cables and 2 numbers as spare pipes and 2 numbers pipes for control and OFC Cables) The size of pipes will be suitable for 1000sq.min. Al. 220KV cables Mtrs. 3200.0 3.2.8 220 KV Cable pulling by motorized winch Machine with Auto Cut only and laying in existing trench / pipes / RCC cable trench Mtr 68000.0 3.2.9 Supply / Providing of Cement Concrete 1:3:6 mix as per site requirements Cum 600.0 3.2.10 Supply and Installation of Route markers / Joint Marker Nos. 736.0 3.2.11 Supply of Bonding Cable Mtr. 2800.0 3.2.12 Supply / Providing of Gl Steel as per Site Requirement MT 40.0 3.2.13 Earthing Material for Jointing Bay Each 72.0 3.2.14 Cable locking belt and associated accesseies Nos. 17000.0 |
| 645 | Testing and comissioning of entire work |
| 646 | Supply and installation of RFID Tags |
| 647 | 33 kV Cable |
| 648 | Supply of 33 kv Aluminum single core 120 Sqmm HV cable. |
| 649 | Laying, installation testing and commissioning of 120 Sqmm HV cable. |
| 650 | Supply and provision of manpower and logistics support and OEM certified jointer for making of Heat shrinkable End terminations |
| 651 | 25 kV Cable & 3.3kV Cable |
| 652 | Supply and erection of Termination kit for 25kV Cable |
| 653 | Supply and erection of Termination kit for 3.3kV Cable |
| 654 | Supply,Delivery,Transportation,loading and unloading of 1C X 630 sq.mm Cu . Cable (25/52kV) Copper/XLPE/PVC, unearthed, FRLS cable |
| 655 | Laying, installation testing and commissioning of of 25 kV Copper single core 630 Sqmm HV cable. |
| 656 | Supply,Delivery,Transportation,loading and unloading of 1C X 630 sq.mm Cu . Cable (3.3kV) Copper/XLPE/PVC, unearthed, FRLS cable |
| 657 | Laying, installation testing and commissioning of of 3.3kV Copper single core 630 Sqmm HV cable. Total 0.0 0.0 0.0 0.0 Schedule B2 - 220kV GIS RSS Bill No. B2 GIS-S GIS-E 220kV RSS Unit Qty. Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item Item No WORK DESCRIPTION FC1-EUR FC2-USD FC3-JPY FC4-INR |
| 658 | 220 KV GIS SWITCHGEAR Supply |
| 659 | Supply of 220 kV Incoming GIS Bay as per specifications |
| 660 | Supply of Traction Transformer Feeding Bay as per specifications |
| 661 | Supply of Auxiliary Transformer Feeding Bay as per specifications |
| 662 | Supply of 220 kV Coupling Bay including busbar coupling bay as per specifications |
| 663 | Bus VT Module Busbar and other items included above as per specifications |
| 664 | 220 KV GIS SWITCHGEAR Erection Installation testing and Commissioning |
| 665 | Erection including testing and commissioning of 220 kV Incoming GIS Bay as per specifications |
| 666 | Erection including testing and commissioning of Traction Transformer Feeding Bay as per specifications |
| 667 | Erection including testing and commissioning of Auxiliary Transformer Feeding Bay as per specifications |
| 668 | Erection including testing and commissioning of 220 kV Coupling Bay including busbar coupling bay as per specifications including Bus VT Module Busbar and other items |
| 669 | LIGHTING CUM LIGHTNING MAST |
| 670 | Supply of support structures for mounting equipment and lightning mast with complete hardware as per specifications and drawings. |
| 671 | Erection including testing and commissioning of support structures for mounting equipment and lightning mast with complete hardware as per specifications and drawings. |
| 672 | PROTECTION AND CONTROL PANEL FOR 220KV GIS |
| 673 | Design, Supply of Control Panel for Incomer Feeder (220 kV Incoming GIS Bay) as per specifications |
| 674 | Design, Supply of Outgoing Feeder (220/33kV Auxiliary Transformer Feeding Bay) as per specifications |
| 675 | Design, Supply of Outgoing Feeder (220/27.5kV Traction Transformer Feeding Bay) as per specifications |
| 676 | Design, Supply of 220 kV Coupling Bay as per specifications |
| 677 | Design, Supply of 220 kV Busbar Protection Bay as per specifications |
| 678 | Erection, Installtion Testing and commissioning of Control Panel for Incomer Feeder (220 kV Incoming GIS Bay) as per specifications |
| 679 | Erection, Installtion Testing and commissioning of Outgoing Feeder (220/33kV Auxiliary Transformer Feeding Bay) as per specifications |
| 680 | Erection, Installtion Testing and commissioning of Outgoing Feeder (220/27.5kV Traction Transformer Feeding Bay) as per specifications |
| 681 | Erection, Installtion Testing and commissioning of 220 kV Coupling Bay as per specifications |
| 682 | Erection, Installtion Testing and commissioning of 220 kV Busbar Protection Bay as per specifications |
| 683 | SAS SYSTEM |
| 684 | Server equipments as per specifications |
| 685 | Gate way and work station (price included in item - 10.1 above) as per specifications |
| 686 | Converter (price included in item - 10.1 above) as per specifications |
| 687 | Printers (price included in item - 10.1 above) as per specifications |
| 688 | Storage, desk and chairs (price included in item - 10.1 above) as per specifications |
| 689 | Supply of 415 V, 3-Phase, 5 KVA UPS with Battery as per specifications |
| 690 | Erection/ Installation, Testing and Commissioning of 415 V, 3-Phase, 5 KVA UPS with Battery as per specifications |
| 691 | LV & Control Cables |
| 692 | Supply of LV Control & power cables as per specifications |
| 693 | Laying, testing and commissioning of LV Control & power cables as per specifications |
| 694 | Supply, erection of hot dip galvanised steel cable trays/raceways/ladders including suspending rods and associated fittings for completion of job |
| 695 | T1- TRACTION SUBSTATION |
| 696 | TRACTION TRANSFORMER 13.1.1 Design, Manufacture & Supply of 220(27.5 kV, 40/50 MVA (ONAN/ONAF) Traction Transformer including Terminal Connectors with NIFPS and all accessories as mentioned In Brief Particular Specifications required for commissioning of Traction Transformer. Set 8.0 13.1.2 Erection/Installation, Testing and commissioning of 220(27.5 kV, 40/50 MVA (ONAN/ONAF) Traction Transformer including Terminal Connectors with NIFPS and all accessories as mentioned In Brief Particular Specifications required for commissioning of Traction Transformer. Set 8.0 13.1.3 Supply of Fittings & other components primary side for completion of Power Transformer as per specifications and drawings (Including PI, Fixing of Clamps/connector etc.,) Nos. 16.0 13.1.4 Erection, Testing & commissioning of Fittings & other components primary side for completion of Power Transformer as per specifications and drawings (Including PI, Fixing of Clamps/connector etc.,) Nos. 16.0 13.1.5 Supply Fittings & other components secondary side for completion of Power Transformer as per specifications and drawings (Including PI, Fixing of Clamps/connector etc.,) Nos. 16.0 13.1.6 Erection, Testing & commissioning Fittings & other components secondary side for completion of Power Transformer as per specifications and drawings (Including PI, Fixing of Clamps/connector etc.,) Nos. 16.0 13.1.7 Supply, Erection, testing and commissioning of 3\\"x80mm and 90mm O.D IPS Al. tube with associated connectors and any other material to make the job complete including cutting and bending etc. Mtrs. 125.0 13.1.8 Supply,Erection,Testing and commissioning os steel structure including the tubular pole structure cable bracket etc. Tonne 12.0 |
| 697 | 25 kV SWITCHGEAR |
| 698 | Supply of 25 kV Incoming GIS Bay as per specifications |
| 699 | Supply of 25 kV Outgoing Bay as per specifications |
| 700 | Supply of 25 kV Coupling Bay as per specifications |
| 701 | Supply of Bus VT Module as per specifications |
| 702 | Erection including testing and commissioning of 25 kV Incoming GIS Bay as per specifications |
| 703 | Erection including testing and commissioning of 25 kV Outgoing Bay as per specifications |
| 704 | Erection including testing and commissioning of 25 kV Coupling Bay as per specifications |
| 705 | Erection including testing and commissioning of Bus VT Module as per specifications |
| 706 | 25 kV CONTROL AND PROTECTIONAL PANEL |
| 707 | Design, Supply of Control and Protection Panel for Incomer Feeder as per specifications |
| 708 | Design, Supply of Control and Protection Panel for Outgoing Feeder as per specifications |
| 709 | Design, Supply of Control and Protection Panel for Coupler Feeder as per specifications |
| 710 | Erection including testing and commissioning of Control and Protection Panel for Incomer Feeder as per specifications |
| 711 | Erection including testing and commissioning of Control and Protection Panel for Outgoing Feeder as per specifications |
| 712 | Erection including testing and commissioning of Control and Protection Panel for Coupler Feeder as per specifications |
| 713 | Supply Installation testing and commissioning of Burried Rail/RCMB (13 mtrs) and associated assemblies with making of holes and connection of cables and GI flat with copper MET as per drawing |
| 714 | A1- AUXILIARY MAIN SUBSTATION |
| 715 | AUXILIARY TRANSFORMER 16.1.1 Design, Manufacture & Supply of 220/33 kV, 15/20 MVA (ONAN/ONAF) Auxiliary Main Transformer including Terminal Connectors with Nitrogen Injection Fire Prevention System (NIFPS) with all accessories mentioned in Brief Particular Specifications required for commissioning of Auxiliary Main Transformer. Set 8.0 16.1.2 Supply of Primary Neutral Isolator as per specifications Set 8.0 16.1.3 Supply of Primary Neutral Current Transformer as per specifications Set 8.0 16.1.4 Supply of Primary Neutral Ligntning Arrester as per specifications Set 8.0 16.1.5 Supply of 24kV, 50Hz, 20 Ohm Secondary Neutral Grounding Resistor including Compact Switching Unit comprising of 2 SNCT, 1 SNLA, 1 SN ISOLATOR mounted in a Cubicle. Set 8.0 16.1.6 Fittings & other components for completion of Power Transformer as per specifications and drawings Nos 40.0 16.1.7 Erection, Testing and commissioning of 220/33 kV, 15/20 MVA (ONAN/ONAF) Auxiliary Main Transformer including Terminal Connectors with Nitrogen Injection Fire Prevention System (NIFPS) with all accessories mentioned in Brief Particular Specifications required for commissioning of Auxiliary Main Transformer. Set 8.0 16.1.8 Erection, Testing and commissioning of Primary Neutral Isolator as per specifications Set 8.0 16.1.9 Erection, Testing and commissioning of Primary Neutral Current Transformer as per specifications Set 8.0 16.1.10 Erection, Testing and commissioning of Primary Neutral Ligntning Arrester as per specifications Set 8.0 16.1.11 Erection, Testing and commissioning of 24kV, 50Hz, 20 Ohm Secondary Neutral Grounding Resistor including Compact Switching Unit comprising of 2 SNCT, 1 SNLA, 1 SN ISOLATOR mounted in a Cubicle. Set 8.0 16.1.12 Erection, Testing and commissioning Fittings & other components for completion of Power Transformer as per specifications and drawings Nos 40.0 16.1.13 Supply, Erection, testing and commissioning of 3\\"x80mm and 90mm O.D IPS Al. tube with associated connectors and any other material to make the job complete including cutting and bending etc. Mtrs. 125.0 16.1.14 Supply,Erection,Testing and commissioning os steel structure including the tubular pole structure cable bracket etc. Tonne 12.0 |
| 716 | 33 KV PANEL |
| 717 | 33kV Switchgear incoming AIS panels as per specifications |
| 718 | 33kV Switchgear Outgoing AIS panels as per specifications |
| 719 | 33kV Switchgear Coupling AIS panels as per specifications |
| 720 | Measuring and Protection AIS equipments as per specifications |
| 721 | Control and Monitoring AIS equipments as per specifications |
| 722 | Erection, Testing and Commissioning of 33kV Switchgear panel in AMS building consist of above items (17.1 to 17.5) and other rewalted measuring and protection equipments, including fixing of base frame, inter connection of cubicles, fixing of busbar and all loose supplied items, interpanel wiring etc. |
| 723 | 33 kV/ 415V, 200 kVA Auxiliary Station transformer |
| 724 | Supply of 33 kV/ 415V, 200 kVA Auxiliary Station transformer as per specifications |
| 725 | Erection including testing and commissioning of 33 kV/ 415V, 200 kVA Auxiliary Station transformer |
| 726 | AUXILIARY ITEMS |
| 727 | Supply of Battery Charger (2 Main + 1 Standby) as per specifications |
| 728 | Erection including testing and commissioning of Battery Charger (2 Main + 1 Standby) as per specifications |
| 729 | Supply of Battery Bank - 300 Ah (2x100%) as per specifications |
| 730 | Erection including testing and commissioning of Battery Bank - 300 Ah (2x100%) as per specifications |
| 731 | Supply of ACDB as per specifications |
| 732 | Erection including testing and commissioning of ACDB as per specifications |
| 733 | Design, Supply and erection including testing and commissioning of DCDB as per specifications |
| 734 | Design, Supply and erection including testing and commissioning of DCDB as per specifications |
| 735 | Supply and erection of Safety Equipment |
| 736 | Metering Equipments |
| 737 | Energy Meter for metering 220kV Power as per specifications |
| 738 | Energy Meter for metering Traction Power as per specifications |
| 739 | Energy Meter for metering Auxiliary Power as per specifications |
| 740 | Energy Meter for metering Depot Traction Feeder as per specifications |
| 741 | Civil |
| 742 | Land Preparation 22.1.1 Land levelling and compacting 22.1.1.1 1. Clearing the site of all encumbrances,2. Cutting/transporting trees, as absolutely necessary, with the approval of and in consultation with the Employer, strictly in accordance with local laws. Set 4.0 22.1.1.2 1. Leveling the site to a finished ground level, as approved by the Employer.2. Compacting the ground, in accordance with standard engineering practices, and setting up of site facilities as per specifications3. All other associated land preparation works Set 4.0 |
| 743 | Boundary wall 22.2.1 1. Pile cap2. Retaining wall3. Column upto plinth beam4. Plinth Beam Set 4.0 22.2.2 1. Column above Plinth Beam2. Casting of precastPanel3. Erection of Precast RCC Panel4. Painting of Precast Panel Set 4.0 22.2.3 1. Installation of Y-Post2.Concertina Wire fixing Set 4.0 |
| 744 | Drainage 22.3.1 Land drainage including Rain Water harvesting Set 4.0 22.3.2 Transformers drainage and baffle walls Set 4.0 |
| 745 | Road 22.4.1 Access Road Set 4.0 22.4.2 Rail-Cum-Road Set 4.0 22.4.3 RCC Road Set 4.0 |
| 746 | Earthing |
| 747 | AMS and Control Room Building 22.6.1 RSS Design (OEM) 22.6.1.1 AMS and Control Room Building, Detail Design, preparation of detailed design for the GIS, AMS & Control Room Building, including Architectural services, Civil and Structural Designs, Lighting, Ventilation and Air conditioning, Detailed design shall include layout drawings, design calculations etc. Set 4.0 |
| 748 | Building construction 22.7.1 After completion of1. Pile cap Foundation2. Plinth beam Set 4.0 22.7.2 After completion of1. Flooring of 1st Floor2. Column up to 1st slab,3. 1st slab of AMS room and Cable teller.4. Brickwork upto 1st slab Set 4.0 22.7.3 After completion of1. Column up to 2nd slab,2. 2nd slab casting of Control room and GIS Hall3. Brickwork upto 2nd slab & Mumty level. Set 4.0 22.7.4 After completion of1. Internal & external plastering &2. All finishing including fixing of doors & windows Set 4.0 |
| 749 | Facilities installations 22.8.1 Providing the various facilities in the AMS & Control Room Building, such as but not limited to light fittings & sockets, fans, VRV based air-conditioners, fire detection and alarm system, yard lighting, earth-mesh under the building and earth-risers, earthing inside the room, all facilities as described in specifications etc. Set 4.0 22.8.2 Include permanent provision of EOT crane in the GIS room for a capacity of not lessthan 5T capable of installing the GIS switchgear. This shall include cranes and liftingequipment wherever required for installation, testing and commissioning. Set 4.0 |
| 750 | Guard Room |
| 751 | Signages |
| 752 | Cable trenches and cables trough |
| 753 | Foundations 22.12.1 220 kV/25 kV Traction transformer foundations, (along with materials) - Foundations along with materials of the entire 25 kV system of Traction Substation Set 4.0 22.12.2 220 kV/33 kV Auxiliary Main transformer foundations,PNCT, NGR, PNLA & CTS foundations (along with materials). Set 4.0 |
| 754 | Testing and Commissioning |
| 755 | Storage space |
| 756 | Landscaping and Plantation |
| 757 | Yard Fencing (chain link fencing) |
| 758 | Oil Tank for Transformer Total 0.0 0.0 0.0 0.0 Schedule B3 - General Requirement Bill no. 3 G&SS 220kV GIS RSS Tools and Spares Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item Sl no. DESCRIPTION Unit Quantity FC1-EUR FC2-USD FC3-JPY FC4-INR |
| 759 | Annexure 1- Consumable Spare |
| 760 | All Consumable spares during DLP (Grease and lubricants, battery water, HT andPVC Tape, Anti track paint, Rust remover, sand paper, maintenance cloth etc.) |
| 761 | Annexure 2- .Contract Spares |
| 762 | Close Coil each type (Included in Item 24) |
| 763 | Trip Coil each type (Included in Item 24) |
| 764 | SF6 Gas Filling Pipe (Included in Item 24) |
| 765 | SF6 Gas (Included in Item 24) |
| 766 | SF6 Gas Storage Tank (Included in Item 24) |
| 767 | Set of 0 rings of all types (Included in Item 24) |
| 768 | Set of rapture disc for all types (Included in Item 24) |
| 769 | Set of Gas Monitor each of all type (Included in Item 24) |
| 770 | Gas leakage detector (Included in Item 24) |
| 771 | Dew Point Measurement Kit (Included in Item 24) |
| 772 | Control Unit (BCPU) each type (Included in Item 24) |
| 773 | Set of Gas filling kit with all accessories. (Included in Item 24) |
| 774 | 33kV AIS complete panel/breaker with accesseries (Included in Item 24) |
| 775 | 33/0.415kV, 200kVA, Dry Type cast resin transformer with LA and TMU |
| 776 | Workstation (server) (Included in Item 24) |
| 777 | Printer all in one A3 laserjet (Included in Item 24) |
| 778 | Printer all in one A4 laserjet (Included in Item 24) |
| 779 | Laptop with neccessory cables and protected SAS software for connection SAS, BCU, BPU provided in RSS (latest configuration i7 processor or better, 8GB RAM, 1TB SSD, Latest windows) (Included in Item 24) |
| 780 | Annexure 3- DLP Spares |
| 781 | 220 kV Outdoor/GIS termination kit (tor all 3 phases) |
| 782 | 220 kV Straight Through Joints |
| 783 | Disconnecting Link Box for 3 phases with SVL) |
| 784 | 220kV Class Lightning Arrester |
| 785 | RCC protection covers |
| 786 | Cable route Marker |
| 787 | Set of tank gaskels and joints for 220 kV transformer |
| 788 | OLTC operating Motor |
| 789 | OLTC counter meter |
| 790 | OIL SURGE RELAY FOR OLTC |
| 791 | OIL TEMP. INDICATOR WITH ALARM AND TRIP CONTACT |
| 792 | WINDING TEMP INDICATOR WITH ALARM AND TRIP CONTACT |
| 793 | AUTOMATIC VOLTAGE REGULATOR FOR RTCC Panel |
| 794 | BUCHHOLZ RELAY WITH ALARM AND TRIP CONTACT DOUBLE FLOATTYPE |
| 795 | MAGNETIC OIL LEVEL GAUGE. WITH LOW OIL LEVEL ALARM CONTACT |
| 796 | PRISMATIC TYPE OIL LEVEL GAUGE |
| 797 | HT and LT bushings |
| 798 | Silica gel |
| 799 | Silica gel breather (OLTC & Main Tank) |
| 800 | 220 kV clamps & connectors used in RSS switchyard. |
| 801 | All type of indications and ilumination lamps for 220 kV Equipment |
| 802 | Fuse, MCB.Diodes, switches. connectors. heating elernenis for 220 kV euipment |
| 803 | Drive motor for disconnector and earth switch |
| 804 | GIS L A counter |
| 805 | Spring charging motor |
| 806 | POTENTIAL TRANSFORMER (PT) 33 kV Swachgears with Fuse |
| 807 | All type of indications and illuminous lamps for 33 kV Equipment |
| 808 | Fuse. MCB,Switches, Connectors, heating elements for 33 kV Equipment |
| 809 | 33 KV Multi core CT suitable for 33kv system |
| 810 | All types of panel looks. indicators, selector swatches, auxiliary contactors. limit switches |
| 811 | 25kV Drive motor of VCB |
| 812 | 25kV Drive motor of dis-connector |
| 813 | 25kV CB Closing coils |
| 814 | 25kV CB Tripping coils |
| 815 | AIL type of indicalions and illumination lamps for 25 kV Equipment |
| 816 | Fuse. MCB. switches, connectors, heating elements for 25 kV Equipment |
| 817 | Termination Kit for 33kV |
| 818 | Termination Kit for 25kV |
| 819 | Termination Kit for 3.3kV |
| 820 | Instruments and Testing Kits |
| 821 | Deleted |
| 822 | Deleted |
| 823 | Deleted |
| 824 | Deleted |
| 825 | Deleted |
| 826 | Deleted |
| 827 | Deleted |
| 828 | Deleted |
| 829 | Deleted |
| 830 | Deleted |
| 831 | Deleted |
| 832 | Deleted |
| 833 | Deleted |
| 834 | Deleted Training of Employer staff |
| 835 | Training Of Employer's Staff 26.15.1 Off shore training M-M 12.0 26.15.2 Training in India M-M 16.0 |
| 836 | Substation Support 26.16.1 Maintenance & Operatonal manuals of RSS Set 4.0 26.16.2 Integrated testing and commissioning of RSS Lot 4.0 26.16.3 As-built Drawing Set 4.0 |
| 837 | Manning supervision upto ROD 26.17.1 Skilled M-M 36.0 26.17.2 Semi-Skilled M-M 36.0 26.17.3 Security guard M-M 36.0 Total 0.0 0.0 0.0 0.0 Schedule C1 - ASS for Corridor 2 & 4 Bill No. C1 ASS C2 & C4 UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item FC1-EUR FC2-USD FC3-JPY FC4-INR FC1-EUR FC2-USD FC3-JPY FC4-INR BILL NO. ASS C2 & C4 AUXILIARY MAINLINE |
| 838 | 33 kV / 415 V Transformers |
| 839 | 33 kV / 415 V Transformers, 500 kVA |
| 840 | 33kV/415 transformer, 630 KVA |
| 841 | 33 KV AIS SWITCHGEAR |
| 842 | Protection Circuit Breaker (1250A) panels, with CT and PT, complete and associated assemblies |
| 843 | Protection Circuit Breaker (1250A) panels, with CT, complete and associated assemblies |
| 844 | Transformer Protection Circuit Breaker (1250A) Panels, with CT, complete and associated assemblies |
| 845 | Coupling Motorised Circuit Breaker (1250A) panel complete with Bus Riser Panel and associated assemblies |
| 846 | Pilot Wire Relays and associated assemblies |
| 847 | Measuring and protection Equipment (Each ASS's) |
| 848 | Bus PT Panel and associated assemblies |
| 849 | Automatic Fire protection system for panels |
| 850 | Automatic Fire protection system for Transformer |
| 851 | AUXILIARIES |
| 852 | Auxiliary Feeding (DC-UPS Protection) for elevated/at grade stations 29.1.1 Battery, Battery Chargers (Type I)-180AH Set 31.0 29.1.3 All other Equipments (ACDB, DCDB etc.,) Set 31.0 |
| 853 | Safety Equipment |
| 854 | WIRING |
| 855 | 33 kV Cables and connections 30.1.1 33 kV Cables (with 120 sq mm Aluminium) and connections(FRLS) km 499.998 |
| 856 | Low voltage power cables and connections for ASS |
| 857 | Sheath Voltage Limiters |
| 858 | Pilot Wire Cables (FRLS) |
| 859 | Supply & Erection of 33kV indoor termination heat shrink type for 120 sqmm Aluminium cable (FRLS). |
| 860 | Supply & Erection of 33kV Straight Through Joints heat shrink type for 120 sqmm Aluminium cable (FRLS). |
| 861 | 3 phase Surge Arrestor with Associate Assembly for 33kV panel |
| 862 | Surge Arrestor with Associate Assembly for Transformer panel (phase - phase, phase - ground) 6 nos. in each Transformer |
| 863 | 33kV Trefoil Clamps/cleat |
| 864 | SOCKET ALONG THE VIADUCT |
| 865 | Viaduct Sockets, associated Fittings |
| 866 | Cable for feeding the Viaduct Socket |
| 867 | LIGHTING ON THE VIADUCT |
| 868 | Lights, Lighting on viaduct, Cables & Associated Fittings |
| 869 | Cable for feeding the viaduct Lights |
| 870 | EARTHING & CABLE TRAYS INSIDE ASS |
| 871 | Earth bus inside the ASS and Earthing Connections |
| 872 | Cable path / trays and associated fittings inside ASS room |
| 873 | ERECTION |
| 874 | Laying of 33KV 1CX120 sqmm cable Aluminium cable (FRLS). |
| 875 | TESTING & COMMISSIONING ASS's |
| 876 | MANNING OF COMMISSIONED ASS's,MANPOWER AND DESIGN COST |
| 877 | Highly Skilled (Supervisor) |
| 878 | Skilled Worker |
| 879 | Manpower Cost 36.3.1 Field Engineer (8 hr shift) M-M 48.0 36.3.2 Skilled Staff (8 hr shift) M-M 96.0 36.3.3 Unskilled Staff (8 hr shift) M-M 144.0 |
| 880 | Design of ASS 36.4.1 Final Design Lot 2.0 36.4.2 Schedule of materials Lot 2.0 36.4.3 As built Drawings Lot 2.0 Total 0.0 0.0 0.0 0.0 Schedule C2 - ASS Depot Bill No. C2 C2 & C4 Auxiliary Depot ASS UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item ITEM No. WORK DESCRIPTION FC1-EUR FC2-USD FC3-JPY FC4-INR BILL NO. ASS Depot AUXILIARY MAINLINE DEPOT |
| 881 | 33 kV / 415 V Transformers |
| 882 | 33 kV / 415 V Transformers, 2500 kVA |
| 883 | 33 KV AIS SWITCHGEAR |
| 884 | Protection Circuit Breaker (1250A) panels, with CT and PT, complete and associated assemblies |
| 885 | Transformer Protection Circuit Breaker (1250A) Panels, with CT, complete and associated assemblies |
| 886 | Coupling Motorised Circuit Breaker (1250A) panel complete with Bus Riser Panel and associated assemblies |
| 887 | Pilot Wire Relays and associated assemblies |
| 888 | Measuring and protection Equipment (Depot ASS's) |
| 889 | Bus PT Panel and associated assemblies |
| 890 | Automatic Fire protection system for panels |
| 891 | Automatic Fire protection system for Transformer |
| 892 | Distance Relay |
| 893 | Overcurrent Realy |
| 894 | LV Bus Duct for Depot |
| 895 | AUXILIARIES |
| 896 | Auxiliary Feeding (DC-UPS Protection) for elevated/at grade stations 39.1.2 Battery, Battery Chargers (Type II) Set 1.0 39.1.3 All other Equipments (ACDB, DCDB etc.,) Set 1.0 |
| 897 | Safety Equipment |
| 898 | WIRING |
| 899 | 33 kV Cables and connections 40.1.1 33 kV Cables (with 120 sq mm Aluminium) and connections(FRLS) km 5.0 |
| 900 | Low voltage power cables and connections for ASS |
| 901 | Sheath Voltage Limiters |
| 902 | Pilot Wire Cables (FRLS) |
| 903 | Supply & Erection of 33kV indoor termination heat shrink type for 120 sqmm Aluminium cable (FRLS). |
| 904 | Supply & Erection of 33kV Straight Through Joints heat shrink type for 120 sqmm Aluminium cable (FRLS). |
| 905 | 3 phase Surge Arrestor with Associate Assembly for 33kV panel |
| 906 | Surge Arrestor with Associate Assembly for Transformer panel (phase - phase, phase - ground) 6 nos. in each Transformer |
| 907 | 33kV Trefoil Clamps/cleat |
| 908 | EARTHING & CABLE TRAYS INSIDE ASS |
| 909 | Earth bus inside the ASS and Earthing Connections |
| 910 | Cable path / trays and associated fittings inside ASS room |
| 911 | ERECTION |
| 912 | Laying of 33KV 1CX120 sqmm cable Aluminium cable (FRLS). |
| 913 | TESTING & COMMISSIONING ASS's |
| 914 | MANNING OF COMMISSIONED ASS's |
| 915 | Highly Skilled (Supervisor) |
| 916 | Skilled Worker Total 0.0 0.0 0.0 0.0 Schedule C3 - ASS Spare for Corridor 2 & 4 Bill no. C3 ASS Spare C2 & C4 UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item ITEM No. WORK DESCRIPTION FC1-EUR FC2-USD FC3-JPY FC4-INR ASS Spare C2 & C4 PSI SPARES FOR Elev. ASS Main Line & Depot |
| 917 | Spares for ASS |
| 918 | 33 kV CB 1250A |
| 919 | Auxiliary Transformer 500 KVA complete |
| 920 | Auxiliary Transformer 630 KVA complete |
| 921 | Battery, Battery Charges (Type I) |
| 922 | Battery, Battery Charges (Type II) |
| 923 | ACDB & DCDB |
| 924 | O/C Relay |
| 925 | E/F relay |
| 926 | MTR relay |
| 927 | Pilot Wire Relay |
| 928 | Differencial Relay |
| 929 | Distance Relay |
| 930 | 33kV Breaker Poles |
| 931 | 33kV breaker gasket set |
| 932 | 33kV breaker tulip contract set |
| 933 | 33kV breaker auxiliary set |
| 934 | 33kV breaker sliding rail set |
| 935 | All type of panel logs indicators selector switches auxiliary contactors, limit switches |
| 936 | All type of panel keys |
| 937 | 33 KVCabIe lCx 120sqmm Al Cable (FRLS) |
| 938 | Straight through joint kit |
| 939 | Indoor Termination kit |
| 940 | Pilot Wire cable (FRLS) Total 0.0 0.0 0.0 0.0 Schedule D1 - CM1 OCC & BCC Bill No. D1 CM1 OCC &BCC UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item ITEM No. WORK DESCRIPTION FC1-EUR FC2-USD FC3-JPY FC4-INR CONTROL & MONITORING Main OCC and Backup OCC |
| 941 | Server |
| 942 | Dual Redundant SCADA Database Servers (Main and Standby) For Corridor 01,Corridor 02 Corridor 03 & Corridor 04 |
| 943 | Dual Redundant SCADA Communication Servers (Main and Standby) For Corridor 01,Corridor 02 Corridor 03 & Corridor 04 |
| 944 | SCADA Archive and Backup Server For Corridor 01,Corridor 02 Corridor 03 & Corridor 04 |
| 945 | Rack for servers with Power Supply Arrangement For Corridor 01,Corridor 02 Corridor 03 & Corridor 04 |
| 946 | WorkStation |
| 947 | Operator Workstation with dual Monitor (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 948 | Workstation for Network Management System (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 949 | Disturbance Recorder (DR) Workstation (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 950 | Engineering Workstation (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 951 | O&M workstation (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 952 | SCADA software |
| 953 | SCADA Software OCC (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 954 | SCADA Software BCC (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 955 | DR Analysis and Relay Configuration Software for DR Workstation (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 956 | Network Management System software (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 957 | Communication Equipments, Cables & Security Systems |
| 958 | Redundant SCADA LAN including managed switches, FO & LAN cables and all accessories for communication over SCADA dedicated/dark Fiber Network (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) a Server Room Managed Switch (Included in item 55.1) Nos. 4.0 b Theatre Room Managed Switch (Included in item 55.1) Nos. 2.0 c FO Cable (6C, SM, Armoured, FRLS-0H) (Included in item 55.1) mtrs. 2000.0 d CAT6 Cable (Included in item 55.1) mtrs. 600.0 e LIU Box (Included in item 55.1) Nos. 8.0 f FO Patch Chord (Included in item 55.1) Nos. 48.0 |
| 959 | Firewall and Security system (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) a Firewall/L-3 Router (Included in item 55.2) Nos. 4.0 |
| 960 | Printers |
| 961 | Laserjet B/W A4/A3 (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 962 | Laserjet Colour A4/A3 (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 963 | Auxiliary Feeding Distribution |
| 964 | 2x20kVA UPS with Battery Set for minimum 3 hr backup at OCC/BCC only (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 965 | Auxilliary Power Feeding Distribution including cables, ACDBs and all other accessories (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) |
| 966 | Large Video Display Screen (LVDS) at OCC only (6*2 MATRIX Minimum 70\\" LASER BASED REAR PROJECTION) |
| 967 | Training Simulator |
| 968 | Training Server cum Workstation and Trainee Work Stations (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) a WorkStation (Included in Item 59) Nos. 4.0 b 24\\" LED Display (Included in Item 59) Nos. 8.0 |
| 969 | Training Simulator Software (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) (Included in Item 59) |
| 970 | Training RTU (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) (Included in Item 59) |
| 971 | Training Room Furnitures (For Corridor 01,Corridor 02 Corridor 03 & Corridor 04) (Included in Item 59) a Table/Desk with attached Drawer (Included in Item 59) Nos. 4.0 b Roller Chair (Included in Item 59) Nos. 4.0 |
| 972 | Control Room Furniture a Table/Desk with attached Drawer Nos. 14.0 b Roller Chair Nos. 14.0 |
| 973 | Erection |
| 974 | Testing and commissioning Total 0.0 0.0 0.0 0.0 Schedule D2 - CM2 RTU Bill No. D2 CM2 RTU UNIT Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item ITEM No. WORK DESCRIPTION FC1-EUR FC2-USD FC3-JPY FC4-INR BILL NO. S1 & S2 CM2 RTU LINE EQUIPMENTS CONTROL & MONITORING Station equipments-RTU |
| 975 | Elevated Stations |
| 976 | RTU for Elevated ASS |
| 977 | Extra for OHE switching station (SS/SP/SSP/FP) |
| 978 | Underground Stations |
| 979 | C&M Cables |
| 980 | Cables from Elevated ASS equipments to RTU |
| 981 | Cables from Elevated SP/SSP/SS/FP equipments to RTU |
| 982 | Communication Equipments and Cables from RSS Gateway/Ports to TER connection |
| 983 | Erection |
| 984 | Testing and commissioning Total 0.0 0.0 0.0 0.0 Schedule D3 - CM3 Depot RTU Bill No. D3 CM3 Depot RTU UNIT Qty(A) Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item ITEM No. WORK DESCRIPTION FC1-EUR FC2-USD FC3-JPY FC4-INR BILL NO. D3 CM3 DEPOT RTU CONTROL & MONITORING (SOLADEVANAHALLI Depot) |
| 985 | Station equipments-RTU |
| 986 | RTU at DEPOT ASS |
| 987 | RTU at DEPOT FP |
| 988 | Cables from ASS equipments to RTU |
| 989 | Cables from FP equipments to RTU |
| 990 | Erection |
| 991 | Testing and commisioning Total 0.0 0.0 0.0 0.0 Schedule D4 - CM4 SCADA Spares Bill No. D4 CM4 SCADA Spares Unit Qty Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item Item No. Work Description FC1-EUR FC2-USD FC3-JPY FC4-INR |
| 992 | SCADA SPARES |
| 993 | Operating Terminal or Work-stations of similar hardware and software configuration as supplied at OCC |
| 994 | Server of similar hardware and software configuration as supplied at OCC |
| 995 | Printer (Laser type, A4 & A3) |
| 996 | Set of LAN Switches consisting one switch of each type as supplied at OCC |
| 997 | Programming software (of each type on CD with License)(One set contains all OCC/RTU software including communication troubleshooting software) |
| 998 | Optical Fiber Cable (SM, Armoured, FRLS-0H) |
| 999 | RTU Rack with all modules equivalent to elevated ASS RTU |
| 1000 | RTU Ethernet Switch |
| 1001 | RTU Power Supply Module |
| 1002 | Voltage Transducer |
| 1003 | Each type of Interface cable required between RTU & Server for troubleshooting/ downloading data from Laptop (USB type) Total 0.0 0.0 0.0 0.0 Schedule D5 - CM5 AMC SCADA Bill No. D5 CM5 AMC SCADA UNIT Qty(A) Bidder has to quote in anyone currecny only out of FC1,FC2,FC3 & FC4 for one item ITEM No. WORK DESCRIPTION FC1-EUR FC2-USD FC3-JPY FC4-INR BILL NO.: D5 CM5 AMC SCADA AMC FOR VARIOUS CONTROL & MONITORING SCADA EQUIPMENTS COVERED UNDER BOQ ( INCLUDING ALL SOFTWARE AND HARDWARE) |
| 1004 | AMC Cost of C&M equipments covered under CM1 OCC & BCC Schedules. |
| 1005 | (+/-) AMC cost for each addition/deletion of following C&M equipments covered under CM1 Schedules. |
| 1006 | WorkStation |
| 1007 | Large Screen video Display Unit |
| 1008 | LVS(Large video screen) video wall additional cubes. |
| 1009 | AMC cost for Line equipments covered under following CM2 & CM3 schedules |
| 1010 | S1 CM2 (Benniganahalli to Soladevanahalli) |
| 1011 | S1 CM2 (Heelalige to Rajankunte) |
| 1012 | S2 CM3 Soladevanahalli Depot |
| 1013 | (+/-) AMC cost for each addition/deletion of following C&M equipments covered under CM2 & CM3 Schedules. |
| 1014 | ASS RTU (Main Line or Yelahanka Depot) |
| 1015 | Extra for each switching station SP/SSP/FP/SS integrated with ASS RTU or another station RTU Total 0.0 0.0 0.0 0.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 51 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 52 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender