Tender For Provision Of Two Wheeler Covered Parking And Provision Of Cubicals At Bldg No. P-79 (Technical Area) At Adrde Agra Under Ge (I) R&D Delhi.
Tender Value
10.55 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
8 days left
EMD
21100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Two Wheeler Covered Parking And Provision Of Cubicals At Bldg No. P-79 (Technical Area) At Adrde Agra Under Ge (I) R&D Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 12mm thick prelaminated particle board with decorative lamination on both sides conforming to IS:12823 Grade-I Type II, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-Charge. |
| 2 | Providing and fixing in repair with float glass of 5mm thickness (weight not less than 20 Kg/Sqm) in aluminium door, window, ventilator shutters and partitions etc, with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. |
| 3 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for fixed portion of doors windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z section and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required diameter and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides including the cost of EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free straight, mitred and joined mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per the directions of Engineer-in-Charge. Note: 1. Weight of aluminium only shall be measured. Cost of all other accessories and fixing charges shall be deemed to the included in the quoted unit rate. 2. Glazing, paneling to be paid for separately. |
| 4 | Surface excavation not exceeding 30cm deep and averaging 30cm deep and getting out in soft/loose soil |
| 5 | M&L Hardcore of broken stone or boulders gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface |
| 6 | M&L 100mm thick PCC (1:3:6) type C- 2 using 40mm graded stone aggregate as in floor etc complete all as specified and directed. |
| 7 | M&L 100mm thick PCC (1:2:4) type B- 2 using 40mm graded stone aggregate as in floor etc complete all as specified and directed. |
| 8 | Providing and laying of 60mm thick grass paver /turf paver of approved size and shape of M-35 grade, made by table vibratory method using PU moulds, over and including 50mm thick compacted bed of fine sand complete all as specified and directed. |
| 9 | S&F Tensile scooter parking (size-21mx5m) executed through an approved specialized agency or OEM conforming to the following specification :- (a) MS Pillar of size 150mm outer diameter and 2.8mm thickness (b) Pairing pillar of size 58mm outer diameter and 2.5mm thickness(c) Other structural members of size 76mm outer diameter and 2.8mm thick.(d) Total number of pillars- 07 Nos(e) High-Tensile, architectural grade PVC and coated polyester fabric, minimum 800GSM, blockout UV-stabilized, anti-fungal and flame retardant.Note : All foundation work will be measured and paid separately. |
| 10 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft/loose soil all as specified and directed. |
| 11 | M&L PCC in foundation, filling and mass-concrete (1:2:4) type B2 (using 40mm graded stone aggregate) complete all as specified and directed. |
| 12 | M&D TMT bars 10mm diameter and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm diameter or securing with clips complete all as specified and directed. |
| 13 | Reinforced cement concrete M-25 (1:1:2) (20mm grade stone aggregates) in Foundations including rafts, footings, foundation, beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete. |
| 14 | M&L Formwork to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work; vertical or to batter rough finished flat surface of concrete. |
| 15 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point. |
| 16 | Returning and filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm with soft/loose soil all as specified and directed. |
| 17 | S&F Mild steel 16x600 mm foundation bolt 'L' shape, hardness for construction, 16mm diameter all as specified and directed. |
| 18 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment steel grade Fe 410-W including hoisting, cutting, grinding edges complete all as specified and directed. |
| 19 | M&L Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable for phase and neutral in surface /recessed non metallic rigid PVC conduit of 20mm diameter, with modular type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc as required complete all as specified and directed. |
| 20 | M&L Wiring for light/power point with 2.5 Sqmm FRLS PVC insulated copper conductor single core cable for phase and neutral in surface/recessed non metallic rigid PVC conduit of 20mm diameter, with modular type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 2.5 Sqmm FRLS PVC insulated copper conductor single core cable etc. as required complete all as specified and directed. |
| 21 | S&F 15/16 amp modular switch on the modular plate switch box including single pole including necessary connections complete all as specified and directed. |
| 22 | S&F 15/16A modular socket outlet 6 pin 15/16A in modular switch box including necessary connection etc. all as required and directed. |
| 23 | S&F 12 way single pole and neutral sheet steel MCB distribution board 240V on surface/recess complete with fitting with tinned copper bus bar, netural bus bar, earth bar, din bar, interconnection, powder painted including earthing etc. complete all as specified and directed. |
| 24 | S&F 32A SPN, 240V, 10KA 'C' curve miniature circuit breaker (MCB) in the existing MCB DB complete with connection testing and commissioning etc all as specified and directed. |
| 25 | S&F 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32A, in the MCB DB complete with connection testing and commissioning etc complete all as specified and directed. |
| 26 | S&F LED flood light with pressure die cast aluminium housing 150W outdoor type, IP 65 protection with light bracket made out of GI tubing, 40mm diameter medium grade of length 1.2m rendering bend of 120 degree including required clamps to hold GI tube including nuts, bolts, washers including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete fitting and connection etc complete all as specified and directed. |
| 27 | S&F energy efficient LED light fitting surface mounted '4' long, 20W, 240V, 50Hz made out of extruded aluminium housing with acrylic diffuser, LM 80 certified LED, constant current out put of of electronic driver of operating voltage 140V to 270V and temperature -10 degree centigrade to 50 degree centigrade with ingress protection IP 20 duly pre wired with insulated copper wire, PF>0.95 with efficiency 120 lumens/ watt and TDH less than 10%, Colour Rendering Index>90 CCT 6500 including connecting up with twin core copper flexible cable of suitable size upto ceiling rose complete all as specified and directed. |
| 28 | Supply, laying and testing cable XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100V grade with stranded aluminium conductor of size 25Sqmm 4 core incl earth work and cable cushioning complete all as required/ specified and directed. Please Enable Macros to View BoQ information |
| 29 | Supply, laying and testing cable XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100V grade with stranded aluminium conductor of size 25Sqmm 4 core incl earth work and cable cushioning complete all as required/ specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender