Tender For Special Repairs / Replacement Of Path Lightings At Various Places At installation Kardip, Kamorta And Provisioning Of Drainage Near Army Accommodation At installation Kardip, Kamorta. 8855/E8
Tender Value
36 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
6 days left
EMD
72000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs / Replacement Of Path Lightings At Various Places At installation Kardip, Kamorta And Provisioning Of Drainage Near Army Accommodation At installation Kardip, Kamorta. 8855/E8
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out getting out in soft/loose soil, complete all as specified and as directed. |
| 2 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed. |
| 3 | Removing excavated material (soil) n exc 50 m and depositing where as directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 4 | Material and Labour for Plain Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and as directed. |
| 5 | Supply, laying or passing through pipe LT, XLPE insulated, galvanised steel strip or wire armoured electric power cable conforming to IS:7098 (Pt-I)-1988, heavy duty with stranded aluminium conductor 1100 Volts grade of size 10 Sqmm 2 core with necessary fixing arrangements such as lugs, glands and terminal etc including connecting/testing after taking out unserviceable LT UG cable from trenches/ pole complete all as specified and directed.NOTE: Excavation, earth work shall be measured and paid for separately. |
| 6 | Supply and laying double wall corrugated pipe (DWC) conforming to IS 19430 Part - I of size 50 mm outer dia and 38 mm inner dia complete all as specified and as directed |
| 7 | Cutting the existing bituminous road/cement concrete surface to the required width and depth for laying UG cable/pipe and making good the disturbed surface of road/path to even surface to match with existing level of road using cement concrete and removing and depositing the debris to a place complete all as specified and as directed. NOTE: Plain Cement concrete shall be measured and paid separately under relevant items of BOQ. |
| 8 | Supply & fix in repairs 50 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc including clamps, nut, bolt and washers etc after taking out unserviceable pipe complete all as specified and directed. |
| 9 | Supply and fixing in repair hot pressed moulded SMC junction/terminal box of internal diemension of 200x140x95 mm and hinged door,including 01 No 4 way connector 415 Volt, 63 Amp, made out of polycorbanate or bakelite with DIN bar,drilling holes for cable connections connecting incomming and or out going cables by providing cable luggs/glands of suitable size fixed on pole by means of clamps made out of MS flat iron of suitable sizes,duly painted with two coats of red oxide zince primer complete all as specifiedand directed. Make : Sintex/L&T/Havells or equivalent |
| 10 | Supply and fix in repairs LED bollard light with pole 10 watt, 240 volt with aluminium body pressure die cast powder coated housing with PC diffuser IP-65 protection with inbuilt LED chip and driver, accessories prewired and fixing accessories complete all as specified and directed. Make:Jaquar/ Crompton Greaves/ Havells/ Philips/ Wipro/ Bajaj. |
| 11 | Supply & fix in repairs MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. Make: Indo Asian/ L&T/Crompton Greaves/Havells |
| 12 | Supply & fix in repairs MCB SP 6-32 amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed. Make: Indo Asian/ L&T/Crompton Greaves/Havells |
| 13 | M&L for petty repair, plastring of foundation size 400mmx400mmx400mm & painting the surface of foundation complete all as specified and direcetd by Engineer-in-Charge. |
| 14 | M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete |
| 15 | M&L for Pre-cast cement concrete block masonry with solid blocks using type C1(1:3:6) (20mm graded aggregate) ,size exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 16 | Material and labour for Plain cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in copings, kneelers, apex stones,bed plates, kerbs, bed block for hold fast including necessary form work all as specified and as directed. |
| 17 | Material and labour for 15 mm thick rendering on brick/concrete surfaces in two layers in CM 1:4, finishing coat of 5mm thick, finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | M&L for providng PCC 1:2:4 type B-1(20 mm graded aggregate) as in surface channels and drains including allmouldsand forms complete all as specified and as directed. |
| 19 | Material and labour for Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs of man holes including necessary form work, placed in position, set in CM 1:4 complete all specified and as directed. |
| 20 | Material and Labour for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 21 | Supply and fix framed work such as grills , grating ,etc with ends of bars shouldered and or revated for forged in to spike, framed guard bars barred iron doors, ladders, balusters, walk ways raling framed work for water tanks similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 22 | M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over two coat of red oxide/Zinc chrome primer complete all as specified and as directed |
| 23 | Removing excavated material (soil) exc 50 m and n exc 250 m and depositing where as directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 24 | Schedule of Credit (Minus) Rs.26000.00 NOTE: Bidder shall insert credit amount of Rs. 26000.00 as rate in Green field under Col-13. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender