Tender For Repair To Certain Roads And Road Side Furniture At Ramban, Banihal And Patnitop Under Age (I) Bhalra
Tender Value
14 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
9 days left
EMD
28000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Doda → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Certain Roads And Road Side Furniture At Ramban, Banihal And Patnitop Under Age (I) Bhalra
BOQ
| Sl. No. | Item Description |
| 1 | Repair to pot holes any depth not exc 1 Sqm each including sweeping free from dust and mud or water scoring sunken sufaces in roads, paths, etc., including cutting around edges to at least 25 mm in depth and making good by applying tack coat with bituminous primer @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, blinded with 0.09 Cum of stone chippings and again well rammed (including supply of premixed macadam, binder and chippings etc). Depth of potholes exc 30 mm complete all as specified and directed. |
| 2 | Premixed bituminious macadam with 4% of binder content by weight of total mix using paving bitumen of Viscosity Grade VG-30 laid with self propelling mechanical paver rolled and compacted to required gradient and camber (consolidated tthickness up to maximum 75mm) to make good the cut edges of roads etc complete all as specified and directed. |
| 3 | Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/ foreign materials and applying evenly a priming tack coat with bituminous primer (Paving Bitumen of Viscosity grade VG-30) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with tendem vibratory roller, complete all as specified and directed.Note: The minimum consolidated thickness will be 30 mm. However it may be increased at places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting their rates. |
| 4 | Marking lines, dashes arrows etc of any description not exc 10 cm width/ girth and not less than 2.50 mm thickness on road surface using hot applied thermo plastic road marking paint mixed with radium glass beads @ 250 gms/ Sqm with automatic machine to provide reflectivity and night vision (approximate temperature being 200° celsius at the time of laying including cleaning the surface by removing all dirt, dust and all other foreign matters, demarcation at site and traffic control, complete all as specified and directed. |
| 5 | Cat eye (road stud) having 3 LED's of colours Red/ Yellow/ Blue/ Green to a side (total 6 Nos) housed in a toughened pressure dia casted aluminium alloy of size 125mm x 125mm of height 20mm with built in stem 37mm x 37mm x 55mm long for fixing with epoxy. LED's solar cells battery and light sensor well protected in side with tough unbreakable polycarbonate transparent sheet roof system workable for 3-4 nights after full charge in 8-10 hours by hammering CAT part No-03-01, RSBN, fixed in repairs complete all as specified and directed.Make: Greenlite/ Dark Eye/ Sinor. |
| 6 | Aluminium body cat eye's dual directional reflective cat eye of aluminium casted stud 100mm x 100 mm having plastic ABS strip containing 31 mini retroreflective glass beads of colour white/ red/ yellow side provided with steel zinc pasted nails of dia 12 mm and of length 120 mm by hammering or epoxy resin fixed in repairs complete all as specified and directed.Make: Greenlite/ Dark Eye/ Sinor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender