Tender For Petty Repair, Smart Periodical Services And Welcome Maintenance To Certain Bldg At Sangli Apartments, Ahq C & Ndc Under Ge New Delhi
Tender Value
1.44 Crore
Estimated cost
Bid Submission
17 Oct 2026
18 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repair, Smart Periodical Services And Welcome Maintenance To Certain Bldg At Sangli Apartments, Ahq C & Ndc Under Ge New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repairs, 150mm long aluminium anodised tower bolts of extruded section complete all as specified and directed. |
| 2 | S&F in repairs, 300mm long aluminium alloy anodised sliding door bolt with hasp & stapple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy complete all as specified and directed. |
| 3 | S&F in repairs, 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 4 | S&F in repairs, 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and directed. |
| 5 | S&F in repairs, 100mm size double action spring butt hinges, mild steel with with steel wire spring, stove enamelled black complete all as specified and directed. |
| 6 | S&F in repairs, continuous piano hinges, mild steel, bright finish or electro galvanised 30mm width of flaps (when open) complete all as specified and directed. |
| 7 | S&F in repairs, 300mm , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 8 | S&F in repairs, 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 9 | S&F in repairs, 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 10 | S&F in repairs, mild steel mortice lock verticle type 100 mm size, 4 levers complete all as specified and directed. |
| 11 | S&F in repairs, mild steel mortice lock verticle type 65 mm size, 2 levers complete all as specified and directed. |
| 12 | S&F in repairs, brass polished 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 13 | S&F in repairs, 75 mm hasp & staple, safety type, aluminium anodised withmild steel steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 14 | S&F stainless steel drapery curtain rods SS 25mm nominal dia and minimum wall thickness 1.20mm of SS-304 grade of approved brackets design as approved fixed in brick/ concrete wall with same finished including knobs/bracket on each end of curtain rod including taking down old pelmet, complete all as specified and directed. |
| 15 | S&F in repairs, brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed. |
| 16 | S&F in repairs, brass chromium plated towel ring 200mm dia complete all as specified and directed. |
| 17 | S&F in repairs, 140 mm length door stopper aluminum alloy body and tongue, anodized, with hard drawn steel spring, complete all as specified and directed. |
| 18 | S&F in repairs, magnetic ball catches with 8mm dia steel ball, and brass body and striking plate including letting in complete all as specified and directed. |
| 19 | S&F in repairs, aluminium (extruded section) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 20 | S&F in repairs, galvanised steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 21 | M&L for running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded exc 6 mm but not exc 9mm) complete all as specified and directed. |
| 22 | S&F in repairs, 18/19 mm thick prelaminated particle boards, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed. |
| 23 | S&F in repairs, 2mm thick fibre sheet glass, ordinary quality and glazing with oil putty, in squares not exc 0.5 sqm in each pane complete all as specified and directed. |
| 24 | S&F in repairs, 5.5mm thick sheet glass, ordinary quality and glazing with oil putty, in squares exc 0.5 sqm in each pane complete all as specified and directed. |
| 25 | S&F in repairs, 1000 to 1400 mm long and 20 mm wide door seal incl 10 mm wide cotton complete all as specified and directed. |
| 26 | S&F in repairs, looking mirror with plastic moulded frame of size 630 X 450mm , 3mm thickness complete all as specified and directed. |
| 27 | S&F in repairs, elegant PVC mirror cabinet with towel rails of size 475mm X 500mm X 150mm complete all as specified and directed. |
| 28 | Repairing, Easing & adjusting of aluminium door including replacement of small article like rubber gaskets, aluminium beadings, screws, etc complete all as specified and directed . |
| 29 | S&F in repairs, small fittings galvanised iron medium grade such as socket, dead plug, elbow, nipple, Tee, union, tank nipple, extension nipple etc for 15 mm bore pipe (ISI marked) complete all as specified and directed. |
| 30 | S&F in repairs, small fittings galvanised iron medium grade such as socket, dead plug, elbow, nipple, Tee, union, tank nipple, extension nipple etc for 20 mm bore pipe (ISI marked) complete all as specified and directed. |
| 31 | S&F in repairs, small fittings galvanised iron medium grade such as socket, dead plug, elbow, nipple, Tee, union, tank nipple etc for 25 mm bore pipe (ISI marked) complete all as specified and directed. |
| 32 | S&F in repairs, 15mm bore brass head, phase, spindle etc of any size for bib cock/pillar cock/ stop cock/WHB or Wall mixture etc any type complete all as specified and directed. |
| 33 | S&F in repairs, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 34 | S&F in repairs, 15 mm bore chromium plated fancy type long body bib taps with elegant knob screwed down high pressure complete all as specified and directed. |
| 35 | Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 36 | Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 37 | Taking up or down steel tubing 25 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 38 | S&F 15mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 39 | S&F 20mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 40 | S&F 25mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 41 | Disconnecting existing tanks of capacity not exc 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.Note :- Cleaning repairing, etc. shall be measured separately |
| 42 | Disconnecting existing tanks of capacity exc 500 & not exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.Note :- Cleaning repairing, etc. shall be measured separately |
| 43 | Disconnecting existing tanks of capacity exc 1000 & not exc 2000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.Note :- Cleaning repairing, etc. shall be measured separately |
| 44 | S&F in repairs, PVC tank covers suitable for 500 litres to 2000 litres tanks complete all as specified and directed. |
| 45 | S&F in repairs, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 46 | S&F in repairs, 15mm bore swan neck mixture type pillar tap, cast copper alloy with capstan head, chromium plated, fancy type, screwed down, high pressure, for hot and cold water complete all as specified and directed. |
| 47 | S&F in repairs, 15mm bore brass CP Wall mixer tap for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 48 | S&F in repairs, 15mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union complete all as specified and directed. |
| 49 | S&F in repairs, 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union complete all as specified and directed. |
| 50 | S&F in repairs, 25mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union complete all as specified and directed. |
| 51 | S&F in repairs, 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 52 | S&F in repairs, 40mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 53 | S&F in repairs, 32 mm bore PVC waste pipe for WHB/urinlas 1000mm long with union etc complete all as specified and directed. |
| 54 | S&F in repairs, 15mm bore Bib tap standard of PTMT(Minimum weight 90 gms) any colour high pressure screwed for iron pipe complete all as specified and directed. |
| 55 | S&F in repairs, ball valve 15mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 56 | S&F in repairs, ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 57 | S&F in repairs, ball valve 25mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 58 | S&F in repairs, glass corner shelf of fixed with and including chromium plated brass screws and cleats complete all as specified and directed. |
| 59 | S&F in repairs, PVC connection 15mm dia and 300/450/600 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed. |
| 60 | S&F in repairs, CI bracket for WHB or kitchen Sink etc complete all as specified and directed. |
| 61 | S&F in repairs, 125 mm dia CP grating(with/without hole) complete all as specified and directed. |
| 62 | S&F in repairs, stack clamps for 100mm bore pipe made out of 50mm by 5mm flat iron and 16mm dia round stays, including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed. |
| 63 | S&F in repairs, 75mm dia PVC (SWR) pipes, with all fittings like bend and joint etc single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed. |
| 64 | S&F in repairs, 110mm dia PVC (SWR) pipes, with all fittings like bent and joints etc single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed. |
| 65 | S&F in repairs, 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 66 | S&F in repairs, stainless steel sink, 1.00mm thick for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement moratar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, over all size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 67 | S&F in repairs, stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement moratar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 68 | Supply only white cement complete all as specified and directed. |
| 69 | S&F in repairs, vitreous china wash down water closet pan (pedestal pattern) white including connection to drain (or outgoing pipe) and to flush pipe, antishonage pipe etc complete all as specified and directed. |
| 70 | S&F in repairs, vitreous china water closet squatting pan 'Orrissa' pattern size 580 X 440 mm white integral foot rests including provision of cement concrete bedding, connnection to flush pipe and making good the disturbed protion of floor to match with the existing surface complete all as specified and directed. |
| 71 | S&F in repairs, Cascade type europen water closet coloured floor mounted, with seat cover , seat cover hanging devices complete all as specified and directed. |
| 72 | S&F in repair vitreous china ware urinal half stall type white/coloured connection to inlet and out going pipe (waste coupling) complete fixed to walls with steel screws and PVC rawel plug and making good the surface by white cement to match the wall shade complete all as specified and directed. |
| 73 | S&F in repairs, brass chromium plated spreader suitable for urinal complete all as specified and directed. |
| 74 | S&F in repairs, 10 Ltrs capacity PVC valveless, syphonic action type, flushing cisterm, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 75 | S&F in repairs, 125mm size brass chromium plated shower roses with or with out swivel joints, including fixing to steel pipe or unions complete all as specified and directed. |
| 76 | S&F in repairs, handle for PVC low level flushing complete all as specified and directed . |
| 77 | S&F in repairs, ball valve for PVC low level flushing cistern complete all as specified and directed |
| 78 | S&F in repairs, syphon kit complete for PVC low level flushing cistern complete all as specified and directed. |
| 79 | S&F in repairs, syphon kit complete for cascade type WC any type complete all as specified and directed. |
| 80 | S&F in repairs,cascade type WC plastic seat cover smooth closing type white/coloured closed pattern with flat bottom and cover and brass hinging device complete all as specified and directed. |
| 81 | S&F in repair Vitreous China rimless wash down water closet pan single piece symphonic action , white, including soft close sheet cover of closed pattern with flat bottom complete all as specified and directed.Make: Hindware Cat part No Hindware 92573, Jaquar Cat No WC OPS-WHT-15853S300UF, Kohlar Cat No 77739T-SL-0, Cera cat No A1014110 |
| 82 | S&F in repairs, wash hand basin vitreous china white, (flat back or angle back type) of size 550X400 mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 83 | S&F in repairs, Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed . |
| 84 | S&F in repairs, 15 mm bore chromium plated health faucet brass of first quality with flexible tube of size 1.0 mtr long and wall hooks, complete all as specified and directed. |
| 85 | S&F in repairs, brass chromium plated toilet paper holder with CP brass screws, complete all as specified and directed. |
| 86 | S&F in repairs, brass chromium plated soap dish with CP brass screws complete all as specified and directed. |
| 87 | Easing and adjusting of wooden door/windows/cupboard shutters of any number of panels for easy closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts complete as in petty repair work complete all as specified and directed. |
| 88 | Repairing of water supply items/ fittings fixtures like leaking of biptap, stop cock, shower rose, gate valve, GI tubing, cistern, syphon, bottel trap, PVC connection, inlet/outlet of water tanks etc including provision for small articles like washers, threads, white lead and clamps etc for day to day maint / complaints complete all as specified and directed. |
| 89 | S&F in repairs, mineral fibre ceiling boards 16 mm thick 600 X 600 mm size including grid 25 X 25 X 1.6 mm thick GI powder coated angles 25 X 35 X 1.6 mm size ‘T’ section fixed with provn of suspenders from ceiling etc (Armstrong RH Dune 99) complete all as specified and directed. |
| 90 | Supplying and laying of CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 91 | Supply and fix 16mm outer dia CPVC brass elbow complete all as specified and directed |
| 92 | Supply and fix 16mm outer dia CPVC UNION complete all as specified and directed |
| 93 | Supply and fix 16mm outer dia CPVC Male brass threaded adaptor (MTA/MBTA) complete all as specified and directed |
| 94 | Supply and fix 16mm outer dia CPVC Female brass threaded adaptor (FTA/MBTA) complete all as specified and directed |
| 95 | Supply only different size nails for necessary carpenter work in day to day maintenance complete all as specified and directed. |
| 96 | Supply only drilling bits of any size for necessary carpenter work/plumbing work in day to day maintenance complete all as specified and directed. |
| 97 | Supply only fisher/gitti(plastic)of any size for necessary carpenter/plumber work in day to day maintenance complete all as specified and directed. |
| 98 | Supply only M seal for necessary carpenter/plumbing work in day to day maintenance complete all as specified and directed. |
| 99 | Supply only cutting blade (for grinder etc) for necessary carpenter/plumbing work in day to day maintenance complete all as specified and directed. |
| 100 | Supply only handsaw blade for necessary carpenter/plumbing work in day to day maintenance complete all as specified and directed. |
| 101 | Supply only glass putty for fixing of glass in day to day maintenance complete all as specified and directed. |
| 102 | Supply only washer any size for pvc connection, sanitary fittings and plumbing items in day to day maintenance complete all as specified and directed. |
| 103 | Supply and fix in repair moulding/beading as in cornices, frames and woodworks not exc 6 sqcm of 1st class softwood in day to day maintenance complete all as specified and directed. |
| 104 | S&F in repair 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed. |
| 105 | S&F in repair 750 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed. |
| 106 | S&F in repair 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed. |
| 107 | Dismantling AC/ fibre sheet/ polycarbonate/ plain or corrugated steel sheeting, any gauge, thickness, incluuding Nainital or similar pattern roof coverings (Necessary double steel scaffolding where required upto two storey bldg) complete all as specified and directed. |
| 108 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 109 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified and directed. |
| 110 | S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 111 | S&F Factory made solid PVC moulded door shutters (with particle board core), 28 to 30mm thick (Stiles) with 2, 4, or 6 raised panel (as ordered) design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supply and fixing in frame at site as per the specification and drawing complete all as specified and directed. |
| 112 | S&F Aluminium anodized barrel tower bolt of 200 mm length of extruded section complete all as specified and directed. |
| 113 | S&F Stainless steel butt hinges of size 100mm complete all as specified and directed. |
| 114 | S&F Aluminium handles,cast type, anodised 150 mm long, complete all as specified and directed. |
| 115 | Dismantling of stone slabs of any decription or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 116 | M&L for granite (of any type) tiles 20mm thick machine cut,skirtin/dado bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and rounding the edges complete over and including 10mm thick rendering plaster in cement mortar 1:4 complete all as specified and directed. |
| 117 | M&L for 18-20 mm thick Granite Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over and including 10mm thick rendering plaster in cement mortar 1:4 complete all as specified and directed. |
| 118 | M&L for 20 mm thick granite work (any type ) Black or any approved coloured (table rubbed and polished in step, jambs, pillers cooking plateform, floor and like) in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed in CM 1:6 complete all as specified and directed. |
| 119 | Dismantling floor hearth or wall tiling including cement mortar bedding and removing rubbish of the premises complete all as specified and directed. |
| 120 | M&L for vitrified ceramic tiles 7-8 mm thick (Square/Rectangular) polished area of each tile exceeding 0.36 Sqm but not exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 121 | M&L for glazed ceramic tiles of approved colour and design in vertical surfaces 300x450x7mm or 300x 200x 7thick including provision of high lighter tiles/boarder and jointed in neat cement slury and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 122 | Taking down chowkhats or frame of any description exc 1.5 Sqm but not exc 4 Sqm each with shutters(without taking off shutters from the frame) complete all as specified and directed. |
| 123 | S&F powder coated aluminum frame / guiding rail for sliding or side hung windows/ventilators and incl. for sliding shutters with one or more rebates incl. necessary joining cleats, rubber gasket/beading glazing clips for fixing, etc complete all as specified and directed. |
| 124 | S&F powder coated aluminum door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 125 | S&F powder coated aluminum glazed/gauzed window and ventilators shutters, side hung type( or sliding type) without sash bars, aluminum section weighting 0.55 kg per mtr including necessary joining cleats, glazing clips, rubber packing, aluminum snap beading, screws including fittings such as peg stays 150mm long (2 Nos) to each leaf, hinges 100mm long (2 Nos) each leaf and suitable handle (1 no.) to each leaf and locking arrangement complete all as specified and directed. |
| 126 | M&L for Glazing with plain sheet glass, ordinary quality, 5 mm thick and glazing with oil putty or aluminium or PVC / wooden beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed. |
| 127 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed. |
| 128 | M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and directed. |
| 129 | M&L for Sand filling under floors tiles including watering and consolidation complete all as specified and directed. |
| 130 | S&F in repair for 4mm thick aluminium composite panel sheet of any choice colour fixed with self taping screw/bolt in any height upto two storey building including necessary double steel scaffolding where required complete all as specified and directed. |
| 131 | S&F 10 mm thick coloured polycarbonate multiwell sheet manufactured from high quality, UV stabilzed resins in roof covering incl necessary fittings & fixtures like aluminium strips, aluminium tee, coach screw and washers etc with silicon joints filler for fixing complete of any colour all as specified and directed by engineer in charge |
| 132 | Dismantling wrought iron or mild steel work of any description not other wise described complete all as specified and directed. |
| 133 | S&F structural mild steel work as in roof trusses (framed), trussed, post, purlins, crane gantries, rails and fastenings and heavy bracket framingetc (beam, tee, angle, channel or flat section) including distance pieces, cleats etc confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed. |
| 134 | S&F for Steel work in tubular trusses confirming to Fe 410-W Gde 250 A including special shaped washer etc. complete using ERW or induction butt welded tubes complete all as specified and directed. |
| 135 | M&L for two coats of synthetic enamel paint on new steel and iron surfaces over a coat of red oxide primer incl preparation of surfaces over 10 cm width of girth complete all as specified and directed. |
| 136 | S&F in repair 23-24mm thick PVC Jallies CNC machine cut as per the approved pattern and design as sample kept in GE Office. The PVC Jallies shall be fixed with the help of screw/nut bolt of suitable size and numbers as decided by the Engr-in-Charge. PVC Jallies shall be fixed to the existing steel frame work after replacing of rusted steel and CNC Jallies including necessary welding work complete all as specified and as directed by EIC. Note : MS steel work will be measured and paid seprately. Make Rajshree/Echon or equivalent as approved by GE |
| 137 | S&F powder coated aluminium partition n.exc 1.20 Sqm in each panel using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/5.50 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board and including taking down old partitioin complete all as specified and directed.Make: GLASS Make MODI/ FLOAT/ ATUL |
| 138 | Dismantling wall, ceiling boards and pre fabrication boards incl frame of any description as in panelling ceiling, partition, cub boards etc incl cover fillets in any surfaces complete all as specified and directed. |
| 139 | S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasters incl moulding at columns, windows and doors jambs complete all as specified and directed.Note:- (a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only. |
| 140 | S&F in repair mild steel silver dormakaba PHCR 1000, 1 & 2 point locking single/double door panic bar heavy duty with powder coted finished with external trim stain and complete all accessories fully functional complete all as specified and directed.Make- Dorma or equivalent as approved by GE |
| 141 | M&L for non skid ceramic tiles of approved colour and design 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 142 | Repairing of urinal/WHB/EWC fitted with sensor through authrised company applicator and replacement any type of defected parts and complete fully functional complete all as specified and directed. |
| 143 | S&F in repairs wall mounted urinal with sensor colored black including fixing to wall with suitable brackets and sensor all as per manufacturers specification and direction complete all as specified and directed. Make: KOHLER Cat Part No 20713INER7 or equivalent of make as specified in PS. |
| 144 | S&F in repair 12 mm thick plywood grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed. |
| 145 | S&F in repair 6mm Plywood, grade BWP, type BB fixed with screws to timber frame work fixed with screws to timber frame work complete all as specified and directed. |
| 146 | M&L for French polishing on surfaces of any description with or girth incluidng cleaning and preparing the surface including a coat of wood filler on new untreated surfaces works with two or more coats till the surface smooth complete all as specified and directed. |
| 147 | S&F in repair 200 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed. |
| 148 | S&F in repair 300 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed. |
| 149 | S&F in repair 100 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed. |
| 150 | S&F in repair Brass slidig door bolts 250 mm long and fixed with brass screws to wooden doors complete all as speciifed and directed. |
| 151 | S&F in repair Brass slidig door bolts 300 mm long and fixed with brass screws to wooden doors complete all as speciifed and directed. |
| 152 | S&F in repair Brass butt hinges 125 mm long type C11 with brass screws fixed to wooden doors complete all as specified and directed |
| 153 | S&F in repair Brass butt hinges 100 mm long type C11 with brass screws fixed to wooden doors complete all as specified and directed |
| 154 | S&F in repair Extruded brass handles 100 mm long polished bright with brass screws complete all as specified and directed. |
| 155 | S&F in repair Extruded brass handles 150 mm long polished bright with brass screws complete all as specified and directed. |
| 156 | S&F in repair Brass door stopper tounged with hard drawn steel spring 140 mm long complete all as specified and directed. |
| 157 | Cleaning, Flushing of chocked and desilting of outdoor sewage lines n. exe 300mm internal diameter of any depth upto three meter. The cleaning shall be carried out with mechanized operation by means of diesel/electric operated vehicle mounted hydraulic operated high pressure suction cum jetting machines fitted with pump of requisite capacity and the sludge sucked out with super sucker machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. the sludge deposited in the sewage line shall be fully cleaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipment and with strict supervision complete all as specified and directed. Note: (a) The service provider/contractor during the mechanised operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) Manual cleaning operation/ scavenging is prohibited. (c) The unit rate quoted by the contractor shall deem to include the cost of providing skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand etc. |
| 158 | Desludging of existing manholes of depth upto 2 mtr (vol of MH exc 0.20 cum but not exc 2.88 cum)for liquid, solids and slurry material by mechanical means using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc removed to outside the MoD land/premises at any distance all as directed by Engr-in-charge including loading, unloading, digging out pit of any size in any type of soil, slurring sludge/stilt/spoil/mud etc into the pit and spraying bleaching power over the entire surface complete all as specified and directed. Note:- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanised operation by means of jetting machines and the sludge sucked out with super sucker machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site.(c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour and skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transportation arrangements. |
| 159 | Desludging including dewatering of septic tank/soak well in dia/ depth and manholes above 2 mtr in depth for liquid and slurry material and removing the sludge from the tank by mechanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc out side the MoD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, slurring sludge/silt/spoil/mud tec into the pit and spraying bleaching powder over the entire surface complete all as specified and directed. Notes:- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanised operation by means of jetting machines and the sludge sucked out with super sucker machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/ scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour 9skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transportation arrangements. (e) The measurement shall be included with depth of water and sludge/silt/mud. |
| 160 | Cleaning of manhole and removing the blockage sludge from manhole by manually with the help of bamboos/rods/pipes including rodding and flushing the water and dispose off the sludge out side of MoD land complete all as directed at site for any size, description of manhole up to 1.5 m internal depth complete all as specified and directed. |
| 161 | Cleaning of sewer line and removing the blockage by manually with the help of bamboos/rods/pipes including rodding and flushing the water and dispose off the sludge out side the MoD land upto 200 mm dia pipes complete all as specified and directed. |
| 162 | Cleaning of Gully trap, Nahni trap, Floor trap, WC,WHB,Urinal and sink by removing the sludge disposed off from out of defence land by manually or mechanically cleaned with water complete all as specified and directed. |
| 163 | Excavation in trenches in any type of soil (Soft/disintegrated) n. exc. 1.5 M wide and n. exc. 1.5 M in depth for foundation for manholes/shafts or sewer line etc. n. exc. 10 sqm on plan & n. exc. 1.5 M in depth & getting out soft loose soil complete all as specified and directed. |
| 164 | Demolition of cement concrete in ground floor and pavings not exc 15 cm in thick below or above ground level complete all as specified and directed |
| 165 | Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete)set in cement mortar & removing demolished material out side defence land (Bore of pipe 100mm) complete all as specified and directed. |
| 166 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed |
| 167 | M&L for SGSW drain pipe grade 'A' 100mm bore (internal) including laying in trenches and jointing in cement & sand mortar 1:2 & testing complete all as specified and directed. |
| 168 | M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregated) as in bed including packing under & haunching against sides of SGSW drain pipe 100mm bore after they are laid & tested complete all as specified and directed. |
| 169 | Returning filling in including spreading levelling, watering and well ramming soil in layers n. exc. 25 cm thick complete all as specified and directed. |
| 170 | Removing excavated materials/surplus soil out side of defence land up to a total distance of 1.5 Km complete all as specified and directed by Engineer-in-charge. |
| 171 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed. |
| 172 | M&L for brick work with sub class B bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 173 | M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in benching, copings, channels, slightly chamfered or rounded on edge including necessary use of form work complete all as specified and directed. |
| 174 | M&L for Rendering 15 mm thick in cement mortar 1:4, on fair faces of brick work of sewer chamber or cement concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 175 | Taking down cement plaster on brick wall any description incl racking out joint, hacking for key, scrubbing down with water etc upto G+11 storey bldg including necessary scaffolding and removal of complete rubbish out of MOD land complete all as specified and directed. |
| 176 | M&L for heavy duty groove Tiles for Commercial & Public Parking of size 400x400 and minimum 12 mm thick suitable for high traffic and max grip and non skid etc set and jointed in neat cement slurry and using 3 mm thick pressure and fill epoxy on tile joint over 20mm thick screed bed in CM 1:4 complete all as specified and directed by engr in charge |
| 177 | Demolition of RCC (reinforced , cut as required to facilitate demolition) of any description and in any position not otherwise specifically provide for as in manhole cover complete all as specified and directed. |
| 178 | S&F precast RCC 1:2:4 manhole covers slabs any size, thickness with 3 mm thick FL around cover slab complete all as specified Make PPRC, polycrete including reinforcement as per manufacture design with frame complete all as specified and directed. |
| 179 | Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming channel (1/2 or 3/4 section) in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate finishing smooth and reframing benching as required for 150/200 mm dia pipes complete all as specified and directed. |
| 180 | S&F in repair Cast Iron trap ''P'' for cast iron pipe of size 100mm, complete all as specified and directed. |
| 181 | S&F in repair Cast iron floor trap of size 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4:), complete all as specified and directed. |
| 182 | S&F in repair salt glazed stone ware gully trap of size 180X150 mm square or rounded mouthed,type \\"P\\" complete all as specified and directed. |
| 183 | S&F in repair Cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in trenches or in floors of size 100 mm bore complete all as specified and directed. |
| 184 | S&F in repair Cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in trenches or in floors of size 75 mm bore complete all as specified and directed. |
| 185 | S&F in repair Cast iron bends (any radius) with ducks foot or heel rest of size 100mm bore of pipe complete all as specified and directed. |
| 186 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:4 as in closing the openings complete all as specified and directed. |
| 187 | M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall (external surface) in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices upto G+11 storey bldg including necessary scaffolding. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge. |
| 188 | M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall (internal surface) in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices upto G+11 storey bldg including necessary scaffolding. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge. |
| 189 | M&L for preparation of newly plastered surfaces and applying two coats of OBD over a coat of alkali resistant primering paint on walls over 3 mm thick wall care putty complete all as specified and directed. |
| 190 | M&L for applying new surface two coat of weather proof exterior emulsion extra premium 100% acrylic emulsion over one coat of 3.0 mm thick putty and one coat of primer upto G+11 stories bldgs height incl necessary scafolding complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 191 | M&L for applying new surface two coat of weather proof exterior emulsion extra premium 100% acrylic emulsion over one coat of 3.0 mm thick putty and one coat of primer upto G+11 stories bldgs height incl necessary scafolding complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender