Tender For Provn Of Toilet Block Alongwith Urinal Point Near Bldg No P-61, Provn Of Standing For Water Tank For Or Md Accn Bldg No P-04 & P-05 And Provn Of Car Parking Near Bldg No P-34 Main Office & P-43(Offrs Mes Accn) At Solan Mil Stn Under Ge Kas
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Oct 2026
2 days left
EMD
42400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Block Alongwith Urinal Point Near Bldg No P-61, Provn Of Standing For Water Tank For Or Md Accn Bldg No P-04 & P-05 And Provn Of Car Parking Near Bldg No P-34 Main Office & P-43(Offrs Mes Accn) At Solan Mil Stn Under Ge Kasauli
BOQ
| Sl. No. | Item Description |
| 1 | Rough excavation not exceeding 1.50 metre deep and getting out in hard/dense soil complete all as specified and as directed. |
| 2 | Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan and not exceeding 1.50m in depth and getting out in hard/dense soil complete, all as specified and as directed. |
| 3 | Surface excavation not exceeding 30 cm deep and averaging 18cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and as directed.. |
| 5 | Removing excavated materials exceeding 50 m upto a total distance of 250 m and depositing where directed complete, all as specified and as directed. |
| 6 | Removing excavated soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.5m above the starting point, complete, all as specified and as directed. |
| 7 | Material and labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and directed. |
| 8 | Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation, filling and mass concrete, complete all as specified and directed. |
| 9 | Material and labour for plain cement concrete 1:5:10 type E-2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. |
| 10 | Material and labour for walling of random rubble stone masonary, brought up to courses, well bonded, bedded and solidly hearted as in walls or foot steps, etc. built in cement morter 1:6 complete all as specidfied and directed. |
| 11 | Material and labour for providing Precast bond stone of plan cement concrete 1:3: 6, type C-1, (using 20 mm graded mechanically crushed stone aggregate) and set in cement morter 1:6 complete all as specidfied and directed. |
| 12 | Material and labour for raised pointing to new or old surfaces of random or polygonel rubble masonary, uncoursed or brought up to courses in cement morter 1:4 complete all as specidfied and directed by Engr-in- charge. |
| 13 | Material and labour for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:4), using old size bricks, complete all as specified. |
| 14 | Material and labour for 40mm thick Damp proof course in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork and Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and directed. |
| 15 | Material & labour for providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, fixing door frames etc including necessary form work complete all as specified and directed |
| 16 | Material and labour for providing reinforced cement concrete 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) in beams, cantilevers, lintels over 1.50m span, complete all as specified and directed. |
| 17 | Material and labour TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 18 | Material and labour TMT bars, 6mm dia and over , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacer, binders, etc complete all as specified and directed. |
| 19 | Material and Labour for formwork to sides and soffits of roof beams, cantilever, bressummers ,lintels , shelves including supports and similar work for rough finished flat surfaces of concrete, complete all as specified. |
| 20 | Taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc and material and labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4 mixed with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete all as specified. (Note : WPC shall be measured and paid separately) |
| 21 | Material and Labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4 mixed with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete all as specified. (Note : WPC shall be measured and paid separately) |
| 22 | Supply only Integral waterproofing compound all as specified as per manufacture instruction complete all as specified and directed. |
| 23 | Material and labour for preparation of new plastered or unplastered surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint, complete all as specified. |
| 24 | Material and labour for Precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs of manholes, gully traps etc set in cement mortar (1:4) complete all as specified and directed. |
| 25 | Supply and fixing mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe-410(Gde 250), complete all as specified and directed. |
| 26 | Supply and fixing of welded steel wire fabric fixed to wood or steel members, weight exc 3 kg per square meter complete all as specified and as directed. |
| 27 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified. |
| 28 | Material and labour for 75mm thick, PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in plinth protection/PCC path, and paving, finished the surface even and smooth without using extra cement, joint filled with bitumen and sand mixture applied hot (area not exceeding 1.20 sqm ) , complete all as specified. |
| 29 | Excavation in posts holes (or similar holes) each not exceeding 0.5 cubic metre, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 metre and good surface in hard/dense soil, complete all as specified. |
| 30 | Supply and fixing mild steel work in tubular trusses ,including special shaped washer etc., complete using ERW or induction butt welded type conforming to IS 1161-1979 grade st. 240 , complete all as specified and directed. |
| 31 | Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based corrugated steel sheet 0.50mm thick, conforming to IS-15961 of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed.Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. |
| 32 | Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in ridge, valley gutter, roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed.Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. |
| 33 | Supply and fixing Factory made box type steel section ventilator with top/centre hung shutter double leaf shutter for glazing and wire gauze with pintle hinges & 01 No 150mm mild steel tower bolt, hinges, steel peg stay, steel handle to each shutter, steel handle dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. |
| 34 | Material and labour for framed work such as grills, gratings, etc with ends of bars sholdered and /or riveted or forged into spikes, framed guard bars,barred iron dooes,ladders, framed balustereds, walk ways railing frameworks of water tank and similar works all as specified and as directed. |
| 35 | Supply and fixing Factory made pressed steel frames of size 105 x 60 mm for doors fabricated from 1.25 mm thick sheet, with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of priming including plain cement concrete 1:3:6 type C-0 (using 12.5 mm graded mechanically crushed stone aggregates) in filling of door frame, complete all as specified and as directed. |
| 36 | Supply and fixing Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side 35mm thick, complete all as specified and as directed. |
| 37 | Supply and fixing figured glass 4mm thick pin head type, in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified. |
| 38 | Supply and fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. |
| 39 | Supply and fixing aluminum anodized, barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified and directed. |
| 40 | Supply and fixing extruded aluminum alloy handle, anodized 150 mm long, fabricated type complete all as specified and directed. |
| 41 | Supply and fixing 300 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed. |
| 42 | Material and labour for preparing new surfaces of wood or wood based material exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer, complete all as specified and directed.. |
| 43 | Material and labour for preparing new steel surfaces exc. 10cm girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 44 | Supply and fixing bib tap, long body, screwed down, high pressure, cast copper alloy, fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union complete all as specified and directed. Make- PRIMA Cat No PLF-6202 or equivalent model in makes mentioned in Appendix 'B' of tender document. |
| 45 | Supply and fixing chromium plated, angle valve, 15mm dia, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and directed(Note : Weight of angle valve shall not be less than 0.400Kg.) |
| 46 | Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated guard and railing 60cm long, complete all as specified and directed |
| 47 | Supply and fixing in repairs, corner glass shelf with 30cm in radius consisting of 5.5mm thick sheet glass with chromium plated bracket guard, complete all as specified and directed. |
| 48 | Supply and fixing soap dish size 160x160x90mm, vitreous china white, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 49 | Supply and fixing 15mm bore, fency type pillar tap long neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 50 | Supply and fixing 20mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for 15mm bore iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.28 kg as approved, complete all as specified and directed. |
| 51 | Supply and fixing brass chromium plated tubular towel rail, 20 mm dia, ‘D’ type 60 cm long between flanges complete all as specified and as directed. |
| 52 | Supply and fixing coloured, vitreous China, box type, toilet paper holder fixed with chromium plated brass screws, complete all as specified and directed . |
| 53 | Supply and fixing wall mounted, multi utility, mirror cabinet, single door, of size 450 mm x 600 mm complete all as specified and as directed |
| 54 | Supply and fixing mild steel chromium plated Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 55 | Supply and fixing PVC connections 45cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified. |
| 56 | Supply and fixed 5.5mm thick looking mirror of selected quality, beveled edge 450mmx600mm glass mounted on 6mm thick AC building board with aluminium beading and rubber packing and fixed to wall with wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 57 | Supply and fixing Stainless steel square Grating 125 mm size (openable type, Minimum weight 100gms), complete all as specified and directed. |
| 58 | Supply and fixing 10 litre capacity virgin polypropylene cistern, ISI marked, coloured at low level complete with PVC bend/flush pipe and making all connection complete all as specified. |
| 59 | Supply and fixing, Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 15 mm bore complete all as specied and directed.Make- Cat No PGT-1401 of PRIMA or equivalent model in makes mentioned in Appendix 'B' of tender document. |
| 60 | Supply and fixing Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 20 mm bore complete all as specied and directed.Make- Cat No PGT-1402 of PRIMA or equivalent model in makes mentioned in Appendix 'B' of tender document. |
| 61 | Supply and fixing wash hand basin, vitreous china, white, decorative type, flat or angle back, size 550mm x 400mm incliding cutting for and pinning in ends of brackets or erecting stand, incl CP waste coupling but exclusive of pillar tap and waste pipe, complete all as specied and directed. |
| 62 | Supply and fixing vitreous china wash down water closet (pedestal pattern) , of snow colour white, of size 570x460x380mm and including plastic seat cover of same colour including pressure jet spray, etc. complete all as specified and as directed |
| 63 | Supply and fixing vitreous china urinal half stall type (back or corner wall type) of size 420x395x635mm, white complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60 mm brass screws, pointing around urinal back in cement, fixing grating and union for discharge pipe excluding flushing cistern, flush pipe but including CP waste coupling,PTMT urinal spreader, etc. complete all as specified and directed. |
| 64 | Supply and fixing , vitreous chainaware, coloured, urinal partition of size 310 x 700 mm fixed to wall with plugs and chromium plated screws complete all as specified and directed. |
| 65 | Supply and fixing water storage tank 500 ltr capacity HDPE triple layered, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including provn of over flow pipe, air lock pipe, brass valve high pressure with polythene float and flynut , ISI marked, screwed and suitable for iron pipe 20 mm bore, complete all as specified and directed |
| 66 | Material and labour for disconnecting existing tank of capacity 500 litre , setting aside(or lowering if required) for repairs, cleaning, etc. and hoisting if required recoonecting and refixing in position including cleaning and removing all scale and dirt etc from the tanks and mouths of circulating pipe complete all as specified and as directed |
| 67 | Taking up or down steel tubing and connections for 15mm dia and refixing the same in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed. |
| 68 | Taking up or down steel tubing and connections for 20mm dia and refixing the same in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed. |
| 69 | Supply and fixing steel water tubing of 15 mm bore, medium grade galvanized, ISI marked with all fittings fixed to wall and ceiling or laid on floor, complete all as specified and directed. |
| 70 | Supply and fixing steel water tubing of 20 mm bore, medium grade galvanized, ISI marked with all fittings fixed to wall and ceiling or laid on floor, complete all as specified and directed. |
| 71 | Cutting chases,pinning inmaking good to facings where required and pointed in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc . cutting not exceeding 10cm girth in brick and making good in cement mortar 1:3 complete all as specified and as directed. |
| 72 | Supply and fixing 110mm dia PVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) |
| 73 | Material and labour for plain cement concrete type C2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (upto 110mm bore pipe) after the pipe are laid and tested complete all as specified and directed. |
| 74 | Supply and fixing 110mm dia PVC (SWR) junction double, (single T), equal or un equal with oval access door including jointing with solvant cement complete all as specified and directed. |
| 75 | Supply and fixing 110mm dia PVC (SWR) plain bend, complete all as specified and directed. |
| 76 | Supply and fixing 110mm dia PVC (SWR) reducer, complete all as specified and directed. |
| 77 | Supply and fix 100mm dia of outlet, PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 78 | Supply and fixing 75mm dia PVC (SWR) vent cowl jointing with solvant cement as required complete all as specified. |
| 79 | Supply and fixing 75mm dia PVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) |
| 80 | Supply and fixing 75mm dia PVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall confirm be to IS 5382-1985) |
| 81 | Supply and fixing 75mm dia PVC (SWR) bends with oval access door with rubber ring joints complete all as specified and directed. |
| 82 | Supply and fixing of 75mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 83 | Supply and fixing 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified and directed. |
| 84 | Supply and fixing 75mm dia PVC (SWR) bends with rubber ring joints complete all as specified and directed. |
| 85 | Supply and fixing 75mm dia PVC (SWR) coupler, complete all as specified and directed. |
| 86 | Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) as in surface channels and drains, complete all as specified and ditected. |
| 87 | Material and Labour extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc., complete all as specified and directed. |
| 88 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed. |
| 89 | Material and labour for premium quality, joint free, non skid, coloured ceramic tile (square/rectangular) of size 400x400x7-8mm thick, as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including cement screed bed 15mm thick in cement mortar (1:4) base, complete all as specified and as directed. |
| 90 | Material and labour for premium quality, glazed coloured ceramic tiles 300 x 450 x 7mm thick on vertical surfaces of walls including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified. |
| 91 | Supply and fixing GI metal suspended ceiling system OREO GI lay in plain of make DEXUNE / HUNTERDOUGLS / LINDER 600 x 600x 0.5mm (TEGULAR) Edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. the tiles should have humidity resistance of 100% with light reflection of 62%Note: (i) To comprise main runner spaced at 1200mm centres securly fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer tahn 600mm require independant support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres(ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire. |
| 92 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work , and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 93 | Demolition of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc. complete, all as specified and directed. |
| 94 | Dismantling of wrought iron or mild steel work of any description not otherwise specially provided complete all as specified and directed. |
| 95 | Material and labour 70mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floor, finishing cement concrete surface even and smooth with out using extra cement complete laid in alternate bays (area of each bay not exceeding 1.80 square metre),complete all as specified and directed . |
| 96 | Material and Labour for Machine pressed precast cement concrete with grey cement and pigment, rubber moulded, interlocking designer paver blocks, in any and shape, confirming to IS-15658-2006 of 80mm thickness, M-40 grade complete, all as specified and as directed. |
| 97 | Material and Labour for 25 mm thick sand filling as bedding layer for paver blocks complete, all as specified and as directed. |
| 98 | Material and labour for plain cement concrete, 1:2:4 type B-1 (using 20 mm graded mechanical crushed aggregate) for levelling course, benching, coving, kerbs, complete all as specified and directed . |
| 99 | Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH , PVC insulated and unsheathed stranded cable drawn through and including non metallic, heavy duty PVC conduit not less than 20mm dia concealed in wall surface of any description (cutting wall using electric driven cutter) with all accessories including modular cover plate, base plate and MS metal box of thickness 1.2mm, ISI marked including 1.5 sqmm single core PVC insulated and unsheathed FRLSH cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point ,fan, exhaust fan point controlled by one switch complete all as specified. |
| 100 | Supply and fixing modular switch 6 Amps, one way 230V, 1 module, 50 Hz supply, complete all as specified |
| 101 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 102 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete all as specified and directed. |
| 103 | Supply and fixing LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 104 | Supply and fixing exhaust fan 300mm sweep , ISI marked, 900 rpm, with, blades, AC single phase 230/240 volt ,steel body with louver and connecting with twin twisted copper conductor flexible of size 0.50 sqmm including cutting of existing wall and making opening in the existing wall for fixing exhaust fan, fixing nut bolts necessary for fixing exhaust fan and making good the disturbed surfaces and testing including taking down unserviceable and depositing to E/M Store complete all as specified and directed |
| 105 | Supply and fixing MCB distribution Boards, double door SPN 4 ways 240V, ISI marked, metal door, IP 43 protection, including incoming and out going connections with thimbles complete all as specified and as directed.. |
| 106 | Supply and fixing MCB single pole 240 volts, 6 to 32 Amps,10KA, 50 Hz, C curve complete all as specified and as directed. |
| 107 | Supply and fixing MCB single pole and neutral 240 volts, 40 Amps,10KA, 50 Hz, C Series complete all as specified and as directed. |
| 108 | Supply, laying, jointing and testing of XLPE insulated, armoured, heavy duty LT cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 10 Sqmm 2 core, complete, all as specified and directed. |
| 109 | Material and Labour for new earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender