Tender For Repair Of Joinery, Plumbing, Tiling With Sanitary Fitting Incl Replacement Of Door, Window, Cupboard At Sanjeevani Enclave, Stn Dental Offrs Mess And Certain Bldg In The Aor Of Age B/R Bhdc Under Ge (East) Delhi Cantt-10
Tender Value
44.99 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
17 days left
EMD
89996
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Joinery, Plumbing, Tiling With Sanitary Fitting Incl Replacement Of Door, Window, Cupboard At Sanjeevani Enclave, Stn Dental Offrs Mess And Certain Bldg In The Aor Of Age B/R Bhdc Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame without taking off shutters of any description exc 1.5 sqm and not exc 4 sqm each complete all as specified and directed. |
| 2 | S & F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl PCC 1:3:6 type C-0 for filling back of chowkhat, complete as specified and as directed. |
| 3 | S & F IInd Class HW 35 mm tk Plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete as specified and as directed. |
| 4 | S&F IInd Class HW 35mm th Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete as specified and as directed. |
| 5 | S & F stainless steel wire cloth . 0.36 mm nominal dia of wire and average width of a aperature 1.40 mm and fixed with stainless steel wire staples, complete as specified and as directed. |
| 6 | S&F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 7 | S&F 150mm long Mild steel pressed handles, oval type, stove enamelled black bolt complete all as specified and directed. |
| 8 | S&F 200mm Mild steel barrel tower bolts, stove enamelled black, with bright boltand fixed complete all as specified and directed. |
| 9 | S&F Aluminium anodized powder coated window sliding/openable type with aluminum anodized outer frame of section 104.0 x 44.45 x1.80mm and inner frame section of 104.0 x 44.45 x1.80mm thick three track aluminium section with rubber gasket and shutter stiles rail of aluminum section of size 25mmx20mmx1.5mm thick with suitable locking arrangement fixing glass pans in frame shutter covered with fully selected quality tinted glass 5 mm thick tinted glass with rubber packing complete each shutters of window shall be provided with 2 Nos 100 mm aluminium handle etc complete all as specified and as directed. |
| 10 | Taking down chowkhat or frame without taking off shutters of any description not exc. 1.5 sqm complete all as specified and directed. |
| 11 | S&F aluminium ventilator with outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded centre mullion size 41mmx65mmx1.3mm thick partly glazed /guazed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,MS wire mess, 3mm thick sheet glass etc, provision for fixing the exhaust fan complete all as specified and directed. |
| 12 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification. |
| 13 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site all specified and directed. |
| 14 | S&F 150 mm Aluminium handles, cast type anodised complete all as specified and directed. |
| 15 | S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified. |
| 16 | S&F 200mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified. |
| 17 | S & F 200 mm Aluminium alloy , anodised, sliding door bolt with hasp, staple door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed. |
| 18 | S&F Aluminium anodized powder coated window sliding/openable type with aluminum anodized outer frame of section 104.0 x 44.45 x1.80mm and inner frame section of 104.0 x 44.45 x1.80mm two track aluminium section with rubber gasket and shutter stiles rail of aluminum section of size 25mmx20mmx1.5mm thick with suitable locking arrangement fixing glass pans in frame shutter covered with fully selected quality tinted glass 5 mm thick tinted glass with rubber packing complete each shutters of window shall be provided with 2 Nos 100 mm aluminium handle etc complete all as specified and as directed. |
| 19 | Supply, fabricating and fixing windows with frame of aluminium powder coated of extruded aluminium section two track with two sliding shutters with following sections (a) Frame section shall be 63.50 mmx38.10 mmx2 mm thick. (b) Two track bottom rail for sliding of shutters 61.85mm x 31.75mmx2mm thick. (c) Two track top section shall be 61.85mm x31.75mmx2mm thick(d) for sliding shutter handle& 'H' bottom section should be 40mmX (18mm+9)mmx1.45mm thick(e) sliding shutter to be provided with 5.5mm thick sheet glass (Modi/Saint gobain/tinted, plain, frosted (f) stainless steel wire clothes 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specified and as directed |
| 20 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottom and sides witrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, 12mm thick PVC mouided solid board both side prelaminated and glass 5 mm for door and partition in repair, complete all as specified and complete |
| 21 | S&F in repair Vinyl Floor seamless antistatic conductive ESD, anti fungal vinyl flooring system, 2 mm thick, with perfectly curved flush covings and copper strips for earthing, all joints welded properly including wall scatting. Flooring in operation theater room will be seamless with perfectly curved flash covings, resistance to mechanical stress and dynamic loads and having ESD/EMI (Conductive) protection characteristics, 2mm thick, washable vinyl. The condictive carbon coated PVC pellets create the permanent static conductive properties. It complies with EN 649. Before laying the Flooring inside the Operation theater a copper strip of width of 25 mm and thickness of 0.05mm is placed in such a way the each flooring tiles get cunnected to earthing complete all as specified and as directed. (Make - MHS/ Gerflor/ Tarkett or Equivalent) |
| 22 | S&F in repair 10 mm thick Toughened glass as in partition/ fixed window including diamond edging all sided, eatching, lining and momnograme area not exc 0.50 Sqm each by sand blasting, including CP \\" L\\" or \\" U\\" heavy duty clamps suitable for fixing of glass, min 4 Nos per Sqm all as specified and directed. |
| 23 | S&F in repair 10 mm thick toughened frosted glass door shutters of size area exc 1.50 Sqm but not exc 3 Sqm, including necessary floor spring hydraulically regulated, otherside fixed on pivot. CP fittings and fixtures, CP handles, CP locking arrangement, necessary cutting & holes moulding and fixed in complete as specified and directed |
| 24 | Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed. |
| 25 | M&L for Vitrified tiles 8-9 mm thick (square/rectengular) polished, size of each tiles is 800x800mm as in floors, over and incl 15 mm thick screed bed in CM 1:4 and joint shall be kept as 3mm filled with epoxy to attain the best result 3mm thick tile spacers to be used, Masking tape shall be put before putting the eposy grout & the grout shall be throughly cleaned immediatly complete all as specified and directed. |
| 26 | M&L Vitrified tiles 8-9mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 27 | Description all as per item No. 26 here-in-before but on vertical surfaces over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and as directed. |
| 28 | M&L for glazed coloured ceramic tiles in dado/vertical surface (300mm x600mm x 7-8 mm) thick fixed with chemical adhesive Fevi Mate of euivalent and joint shall be kept as 3mm filled with epoxy. to attain the best result 3mm thick tile spacers to be used,Masking tape shall be put before putting the eposy grout & the grout shall be throughly cleaned immendiatly, complete all as specified and directed. |
| 29 | M & L for Coloured Glazed ceramic tiles in vertifical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in colour cement to match over and including 10 mm th rendering in CM 1:4 complete all as specified and as directed. |
| 30 | M & L for Non-skid Coloured Ceramic tiles 7 to 8 mm thick (Square/rectangular) area of tile exc 0.11 Sqm but not exceeding 0.18 Sqm in floors, set and jointed in neat cement to match the shade over and including 15 mm thick screed bed in CM 1 : 6 complete all as specified and as directed. |
| 31 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed. |
| 32 | Hacking out old broken glass (any thickness) from metal frame/aluminium frames including punching or drilling out old galzing pins complete all as specified & directed. |
| 33 | S & F 4.0mm thick ordinary glass and glazing with oil putty in square n exc 0.5 Sqm in each pane or rubber beading /putty as required complete all as specified & directed. |
| 34 | S & F 4.80mm thick Frosted glass and glazing with oil putty in square n exc 0.5 Sqm in each pane or rubber beading/putty as required complete all as specified & directed. |
| 35 | S & F in repair Stainless steel glass door handle 600mm long with screw complete all as specified and directed. |
| 36 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc |
| 37 | M&L rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of walls finished and even & fair without using extra cement complete all as specifed & as directed. |
| 38 | M&L rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick surfaces of walls finished the surface even & Smooth without using extra cement complete all as specifed & as directed. |
| 39 | M&L 10 mm thick plastering in Cement Mortar 1:3 finished even and smooth w/o using extra cement on ceilings complete all as specifed & as directed. |
| 40 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 white marble stone chipping 10mm nominal size with colour compound) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. (Note: Payment for providing grooves shall be made separately). |
| 41 | M&L for preparing the newly plastered wall surface then applying 2mm thick wall care putty followed by two coat of oil bound distemper over one coat of alkali resistant primer complete all as specified and directed. |
| 42 | M&L for two coats of oil bound distemper including prepration of new ceiling surface and priming plastered and other surfaces with alkali resistant priming paint over 1 mm thick wall care putty complete all as specified and directed. Please Enable Macros to View BoQ information |
| 43 | M&L for two coats of oil bound distemper including prepration of new ceiling surface and priming plastered and other surfaces with alkali resistant priming paint over 1 mm thick wall care putty complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender