Tender For special Repair For Replacement Of Boiler & Other Ber Equipment For Laundry Plant At Mh Shillong Under Ge Shillong
Tender Value
43.94 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
17 days left
EMD
87880
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair For Replacement Of Boiler & Other Ber Equipment For Laundry Plant At Mh Shillong Under Ge Shillong
BOQ
| Sl. No. | Item Description |
| 1 | Taking Down of 02 Nos Boilers including all accessories and connected spair parts including pipe lines & Drying Tumbler machine 01 No and submit the same in MES Store yard complete all as specified and as directed. |
| 2 | Supply, installation, testing and commissioning of oil fired (LDO/HSD) vertical boiler capable of generating minimum 700 Kg/hrs steam up to maximun working pressure of 15 Kg/cm² alongwith following accessories(a) Electrical Driven feed water pump with motor, V-belt & pully mounted on the skid.(b) Economizer with feed water level controller and optimizer header.(c) Fuel oil solenoid valve, fuel oil filter, fuel pressure gauge with dampening cock.(d) Burner comprising of fuel oil pump and blower, complete with motors.(e) Mountings like main stream stop valve flanged at steam header, non-return valve at feed water pump discharge, blow down valve with limit switch, steam safety valve and by-pass valve at steam header, steam pressure gauge with siphon pipe and dampening cock of steam header complete all as specified and as directed. |
| 3 | Supply, installation, testing and commissioning of MS fabricated guy rope supported Chimmney of dia 300 mm ,height 15 M in section of suitable thickness 7 length alongh with port for pollution monitoring complete all as specified and as directed. |
| 4 | Supply & Erection of flue gas ducting from Boiler to existing Chimney complete all as specified and as directed. |
| 5 | Supply of Fuel Service Tank(500 lt) with water level indicator, nozzle for inlet,outlet,drain overfloe vent complete all as specified and as directed. |
| 6 | Supply and Erection of water and fuel piping inside the boiler room for blow down, safety valve exhausts, feed water pump suction line, drains with necessary fitting complete all as specified and as directed. |
| 7 | Suplying, fabricating & fixing structural mild steel channel, angle, iron, flat iron, sheets and brackets etc for fabrications of valve chamber cover, chasis for pump, PS tank plates, PS tank covers, clamps and back plates including nuts, bolts and washers, welding banding cold , or hot drilling holes for insulators bolts in any shape or size as indicated or directed and inclusive of one red oxide primer coat ,one under coat and one finishing coat of aluminium paint complete all as specified and as directed. |
| 8 | Supply & Fixing of flange fitting, nut bolts & gasket suitable for joining of steam pipes of size upto 50mm dia complete all as specified and as directed. |
| 9 | Supply & Fixing of steam trap assembly of 15mm size complete all as specified and as directed. |
| 10 | Supply and fixing Strainer Y type conforming to IS, size 50mm dia complete all as specified and as directed. |
| 11 | Supply & Fixing 40 mm seamless carbon steel pipe suitable for medium to high pressure steam of grade ASTM A106 Grade - B. complete all as specified and as directed. |
| 12 | Supply & Fixing 25 mm seamless carbon steel pipe suitable for medium to high pressure steam of grade ASTM A106 Grade - B. complete all as specified and as directed. |
| 13 | Supply & Fixing 15 mm seamless carbon steel pipe suitable for medium to high pressure steam of grade ASTM A106 Grade - B. complete all as specified and as directed. |
| 14 | Material and laying for insulation of 40 mm MS pipe with PUF slab 30mm thick with and including applying bituminus compound and GI cladding with 26 gauge GI sheet complete as specified and directed. |
| 15 | Material and laying for insulation of 25 mm MS pipe with PUF slab 30mm thick with and including applying bituminus compound and GI cladding with 26 gauge GI sheet complete as specified and directed. |
| 16 | Material and laying for insulation of 15 mm MS pipe with PUF slab 30mm thick with and including applying bituminus compound and GI cladding with 26 gauge GI sheet complete as specified and directed. |
| 17 | Supply and fixing of 40mm Steam stop valve complete all as specified and as directed. |
| 18 | Supply and fixing of 25mm Steam stop valve complete all as specified and as directed. |
| 19 | Supply, intallation ,testing and comissioning of Drying Tumbler machine of capcity 60 kg min made of outer M.S, inner basket Stainlesss steel,,steam heated with feature of auto reverse, auto timed, auto temp control fitted with control panel &5 HP, 3 phase motar operated complete all as specified and as directed. |
| 20 | Material and labour for point wiring with single core PVC insulated unsheathed cable of size 1.5 Sqmm nominal area with multi-stranded FRLSH copper conductor, 1100 Volt grade drawn through and including PVC non metallic surface casing capping of suitable size with all fitting and accessories including PVC modular board of suitable size for housing/mounting the modular switches/sockets, etc top covered with plastic laminated sheet 3mm thick including 1.5 Sqmm PVC insulated unsheathed single core FRLSH copper conductor earth continuity wire connected to common earth dolly complete for one light/fan point controlled by one way switch including making good disturbed surfaces complete all as specified and directed. |
| 21 | Description all as per Srl item No. 20 here in before but for socket outlet point 5 Amp on Independent board complete all as specified and as directed. |
| 22 | Description all as per serial item No 20 but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and as directed. |
| 23 | Supply and fixing modular switch 1 way 6A with cover plate and frame 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and as directed. |
| 24 | Supply and fixing modular switch 1 way 16A with cover plate and frame230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and as directed. |
| 25 | Supply and fixing modular sockets with cover plate and frame 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and as directed. |
| 26 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with cover plate and frame 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and as directed. |
| 27 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed. |
| 28 | Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule all as specified and directed . |
| 29 | Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. |
| 30 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. |
| 31 | Supply and fix MCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one all as specified and directed. |
| 32 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.complete all as specified and directed. |
| 33 | M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted complete all as specified and as directed. |
| 34 | Supply and Erection of electric driven motar pump for pumping of DHPP at hight of 5 meter including piping inside the boiler room with necessary fitting complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender