Tender For Construction Of Oxygen Charging Bay And Provision Of R For Storage Of Oxygen And Nitrogen Cylinders With Connected Items For 132 Hu At 30Wg Sarsawa Under Ge (Af) Sarsawa
Tender Value
44.81 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
6 days left
EMD
89700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Oxygen Charging Bay And Provision Of R For Storage Of Oxygen And Nitrogen Cylinders With Connected Items For 132 Hu At 30Wg Sarsawa Under Ge (Af) Sarsawa
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation n exc 10 sqm on plan and n exc 1.5 m depth and getting out soft/loose soil complete all as specified. |
| 2 | M&L PCC (1:4:8) type D2 (using 40mm graded stone aggregate) in foundation complete all as specefied and directed |
| 3 | M&L for formwork to sides of concrete foundations, footings, bases of columns, plinth beam and similar work for flat fair finished surface complete all as directed. |
| 4 | M&L for formwork to sides of pillars, posts,columns etc in square, rectangular and similar work fair finished surface complete all as directed. |
| 5 | M &L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 6 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 7 | M & L RCC (design mix) M-25 (using 20mm graded stone aggregate) as in foundation, including rafts,plinth beams, footings all as specified and directed by Eng-In-Charge |
| 8 | M&L for Reinforced cement concrete (design Mix) M-25 (using 20mm graded stone aggregate) as in Lintels & roof beam all as specified and directed by Engr-In-Charge |
| 9 | M & L RCC (design mix) M-25 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 10 | M&L for Reinforced cement concrete (design Mix) M-25 (using 20mm graded stone aggregate) as in slabs complete all as specified and directed. |
| 11 | Supply and fix TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 12 | Supply and fix TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 13 | M&L moorum filling in floors laid in layers not exc. 15cm thick spread, leveled and rammed including watering (Moorum brought from outside MD Land) complete all as specified and directed. |
| 14 | M&L PCC (1:4:8) type D2 (using 40mm graded stone aggregate) 100mm thick as in sub base complete all as specified and directed. |
| 15 | Hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of 100mm thick with broken/stone/bouldres complete all as specified and directed. |
| 16 | M&L Brick work with sub class 'B' Bricks burnt bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM (1:4) complete all as specified and directed. |
| 17 | M&L Brick work with fly ash sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM (1:4) complete all as specified and directed. |
| 18 | M & L rendering 15mm thick plarster on fair faces or other than fair faces of brick work in CM (1:4) with WPC finished even & smooth without using extra cement complete all as specified and directed.Note:- WPC shall be measured and paid seprately. |
| 19 | M&L for 5mm thick rendering in CM (1:3) on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed. |
| 20 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified complete all as specified and directed by Eng-In-Charge |
| 21 | M&L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces including 1mm thick plater of paris putty over plastered surface to make it smooth complete all as specified and directed. |
| 22 | M&L for preparation for new plasterd surfacs of walls,distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50ngms/litre,of approved manufacturer, of required shade and colour complete, as per manufacturer's specification with Two or more coats on new plastered surface over a coat of 2mm thick plaster of paris putty to make the surface smooth including rubbing with sand paper of requisite micron complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distermper over a coat 3mm thick birla white putty complete all as specified and directed. |
| 24 | M & L 75mm thick PCC(1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 25 | Supply only integral water proofing compound complete all as specified and directed. |
| 26 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified complete all as specified and directed. |
| 27 | Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point as specified and directed complete all as specified and directed. |
| 28 | S&F anodised aluminium frame powder coated for doors & windows with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 29 | S&F anodised aluminium windows and ventilators powder coated with frames & shutters with one or more rebates including joining cleats, glazing clips, rubber padding, anodised aluminium snap beading screws etc and necessary aluminium iron mongary for fixing etc complete all as specified and directed. |
| 30 | S&F 4.00 mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads complete all as specified and directed. |
| 31 | S&F Powder coated Anodised aluminium door shutters,weighing 0.55 kg/Rm, aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 32 | S&F Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, 9mm thick, complete all as specified and directed. |
| 33 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up thegaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitredand jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 34 | M& for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed (1:6) complete all as specfied and directed. |
| 35 | Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 36 | Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. |
| 37 | Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface all as specified and directed complete all as specified and directed. |
| 38 | Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area all as specified and directed complete all as specified and directed. |
| 39 | Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall all as specified and directed complete all as specified and directed. |
| 40 | M&L for rendering 10mm thick cement mortar (1:3) on concrete surface even and smooth with water proofing compound complete all as specified and directed. |
| 41 | M&L for Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer confirming to IS :3384-1965 @ 0.40kg/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers laid with torching application to the surface over a coat of hot blown bitumen 85/25 @1.20 Kg/Sqm complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed. |
| 42 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 cm deep and getting out in soft loose soil complete all as specified and directed. |
| 43 | Rolling and consolidating formation surfaces in cutting/filling to required gradient and camber including filling in depression and hollow, watering, leveling etc. complete using power roller exceeding 8 tonne and not exceeding 12 tonne capacity complete all as specified and directed. |
| 44 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 45 | M&L for Providing and laying prepolished cement concrete Chequered tiles 30cmx30cmx25mm thick, with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape heavy duty, set, jointed and pointed in neat cement slurry in floors over screed bed 15mm thick (1:6) cement mortar complete all as specified & directed. |
| 46 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 47 | M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 volt grade (FRLS) electric cable with multi stranded copper conductor of size 2.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia concealed type including all flame proof conduct fittings and accessories such as tees junction boxes, bends duly tested by CMRI Dhanbad suitable for one light /fan point controlled by one flame proof rotary switch SP one way and including drawing continuous earth wire PVC insulated unsheathed 1100v grade cable with stranded copper conductor of size 1.5 Sqmm and connected to earth dolly complete conforming to IS-694 all as specified and directed. |
| 48 | Supply and fixing flame proof/weather proof direct entry type rotary switch single pole on & OFF rotary motion switch in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230Volts 16 Amps, AC ON/OFF switch operated externally by Knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on Wall/Steel structure etc duly tested & certified by CMRI-Dhanbad complete all as specified and directed. Make : Flexpro Cat Part No WP/PB1-1/1010-2A Series or equivalent make of Sudhir/Baliga. |
| 49 | S & F in replacement flame proof switch socket and plug combined in LM-6 cable termination box in LM-6, 16 A, 250 V, 2P plus earth complete all as specified and directed. |
| 50 | M&L for sub main wiring with multistranded copper conductor cable FR -PVC sheathed in and including ERW rigid steel stove enameled conduit 19/20mm dia along with all flame proof and weather proof accessories such as multiple junction boxes, covers,elbow, bends,tees etc with 2 x 10 sq. mm copper wire with 1 x 10 sq. mm flexible copper wire as earth wire and connected to earth dolly complete all including chase cutting and making good the disturbed surfaces as specified and directed. |
| 51 | S & F LED 1x16 Watt flame prooflight fitting, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.Note: (a) All fittings shall be ISI marked and shall have approval of CMRI Dhanbad.(b) Original Test certificate of Manufacturer shall be produced by Contractor. |
| 52 | Supply and fixing flame proof/weather proof 1200 mm sweep ceiling fan all as specified by Engr-in-Charge. |
| 53 | S&F totally enclosed flame proof exhaust fan, 300 mm sweep, 1440 RPM, 0.25 HP motor, with louvers and making suitable size hole in the wall for air flow and grouting of nuts, bolts and washers or any other accessories required at site for the effective functioning of exhaust fan, duly tested and certified by CMRI, Dhanbad suitable for operation on 230 Volts, single phase, AC supply including making necessary electric connection to the fan with flexible cord copper of size 23/0.0076 from ceiling rose to exhaust fan complete all as specified and directed. |
| 54 | Supply install testing and commisioning of flame proof totally elclosed 16 Way VTPN DB complete with CMRI certified and flame proof whether proof complete with emergency off switch with LED indicator as per incoming and outgoing circuit.Incoming:(a) MCCB 4 Pole 125 Amp, 16 KA breaking capacity, B Curve -01 NosOutgoing:(a) MCB SP 6 Amp, 10 KA breaking capacity, B Curve -04 Nos(b) MCB SP 16 Amp, 10 KA breaking capacity, B Curve -06 Nos(c) MCB SP 32 Amp, 10 KA breaking capacity, B Curve -05 Nos |
| 55 | Supply install testing and commisioning of flame proof totally elclosed 12 Way VTPN DB complete with CMRI certified and flame proof whether proof complete with emergency off switch with LED indicator as per incoming and outgoing circuit.Incoming:(a) MCCB 4 Pole 100 Amp, 16 KA breaking capacity, B Curve -01 NosOutgoing:(a) MCB SP 6 Amp, 10 KA breaking capacity, B Curve -02 Nos(b) MCB SP 16 Amp, 10 KA breaking capacity, B Curve -07 Nos(c) MCB SP 32 Amp, 10 KA breaking capacity, B Curve -01 Nos |
| 56 | Supply and install 1.5 TR, hot and cold, hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity as shown complete all as specified and directed. |
| 57 | Supply and install 2 TR, hot and cold, hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity as shown complete all as specified and directed. |
| 58 | Supply and fix industrial dehumidifier of extraction capacity of 1000 Ltr/day,3 Phase, 415 V, 50 Hz,Process Air Flow 1000 (CMH), Process ESP of 200 Pa, React heater of 12 KW, Air Filters Class EU-2 or better, Digital display panel for Relative humidity and temperature measurement and area coverage upto 150 Cubic Meters, automatic restart feature, featuring roller castors with hot gas bypass and continuous drainage option. |
| 59 | Supply installation commissioning and testing of advance maintenance free enviroment friendly ring earthing system each set consisting of 3 nos of 10 feet long 17.2 mm dia earth electrode made of high tensile carbon steel circular rods moleculerly bound copper on outer surface (min copper bonding thickness 250 microna) with terminals to connect incomung strip with 3 bags ( 60 kg each) of enviroment friendly portland cement based backfill compound (Resistivity below 0.15 ohms) for each bore as per manufacturing instruction with ROHs test certificate for each 150x25x6 mm copper bar with 4 hole shall be exothermic welding on top to copper rod to terminal laid in a bore of dia 300 mm which inner dia of size 150 mm fill with backfill material and outer bore filling with 100 kg Bantonite in each bore . 25x3 mm copper strip shall be used to interconnect the earths and to make the ring and earth pit cover polypropylene (300mm x 300mm) duly enclosed in PCC pit of size 600 x 600 x 100 mm shall be included in the scope of work complete all as specified and directed. NOTE- 1. Earthing shall be tested after completion of work by contractor in presence of Engr-in-Charge and proper record shall be kept duly signed by all concerned on testing if the earth resistance result is not less than 1.0 ohms than the earthing will be redone at no extra cost to Govt. 2. The copper strip from earthing to and upto eqpt shall be measured and paid seperately under relevent items. 3. Test point measured and paid seperately. |
| 60 | Supplying, laying, jointing, testing and commisssioning in replacement underground XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured , electric power cable (heavy duty) 1100 volt grade with size of 70 Sqmm 3.5 core confirming to IS: 7098 part-I ammended upto date, laid in trenches, along pole/wall/across road etc as per site condition complete all as specified and directed. Note:- Exacavation/Earth work , brick & sand protection shall be measured and paid saperately. |
| 61 | M&L for common burnt clay bricks, sub class 'B' grade laid in trenches for protection of UG cables perpendicular to the direction of the cables complete all as specified and directed. |
| 62 | M&L for sand cushioning with layer of dry, clean & fine sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender