Tender For Repair And Maintenance Of 11 Kv Substation And Connected Works At Cpc (Cpdc) & Govardhan At Elsec And Recently Taken Over Bldgs Under Ge(I) R&D Rci Hyderabad
Tender Value
46 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
18 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranga Reddy → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of 11 Kv Substation And Connected Works At Cpc (Cpdc) & Govardhan At Elsec And Recently Taken Over Bldgs Under Ge(I) R&D Rci Hyderabad
BOQ
| Sl. No. | Item Description |
| 1 | =B2& \\" BoQ\\" BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) R&D RCI HYDERABAD Name of Work: REPAIR AND MAINTENANCE OF 11 KV SUBSTATION AND CONNECTED WORKS AT CPC (CPDC) & GOVARDHAN AT ELSEC AND RECENTLY TAKEN OVER BLDGS UNDER GE(I) R&D RCI HYDERABAD Contract No: GE(I) RCI/HYD/ OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # SlNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Basic Rate In Figures To be entered by the Bidder Rs. Ps. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes Total Amount With Taxes Total Amount In Words |
| 2 | M&L, locating fault in 11 KV HT underground cable of any sizes with the help of fault locator vehicle organized from TSSPDCL/TSTRANSCO by injecting necessary high voltage to the faulty cable within 12 hours of time from time of reporting of fault all as directed by Engineer in Charge.Note : Quoted rate shall deemed to be included the necessary charges towards liaisoning for arranging fault locating vehicle, transportation of trained technicians and charges payable to Electricity Department. |
| 3 | Supply and fix cable jointing kit for 11 KV (Earthed) grade Indoor/Out door cable for heat shrink type End Joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 120 Sqmm to 185 sqmm |
| 4 | Supply and fix cable jointing kit for 11 KV (Earthed) grade Indoor/Out door cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 50 Sqmm to 95 sqmm |
| 5 | Supply and fix cable jointing kit for 11 KV (Earthed) grade Indoor/Out door cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 120 Sqmm to 185 sqmm |
| 6 | Supply and topping up New transformer oil conforming to IS: 335 (1993), dielectric strength not less than 60 KV at 2.5 mm gap in various capacities distribution transformers installed at various indoor and outdoor sub stations complete all as specified and directed. Make: Power oil / SERVO / Castrol / Shell. |
| 7 | M & L Dehydration of transformer oil of various capacities distribution transformers installed at various location of RCI indoor and outdoor transformers with ultra high vaccum filtration machine to obtain the dielectric strength of 60 KV at 2.5 mm gap complete all as specified and directed. Note :- Tool and plant for filtration deemed to included in the quotted rate |
| 8 | Taking down the defective air breathers from the transformers, supply and fix new breathers with flange type 1/2 Kg bottle suitable for step down distribution transformers of any make and capacity ranging upto 250 KVA including filling of new silica gel in breathers complete all as specified and directed. |
| 9 | Taking down the defective air breathers from the transformers, supply and fix new breathers with flange type 1 Kg bottle suitable for step down transformers of any make and capacity ranging from 250 KVA to 500 KVA including filling of new silica gel in breathers complete all as specified and directed. |
| 10 | Taking down the defective air breathers from the transformers, supply and fix new breathers with flange type 2 Kg bottle suitable for step down distribution transformers of any make and capacity ranging from 630 KVA to 1500 KVA including filling of new silica gel in breathers complete all as specified and directed. |
| 11 | M&L Silica Gel Crystal suitable for step down transformers of any make and capacity including filling of new silica gel in breathers complete all as specified and directed. |
| 12 | Disconnecting the electric supply to the transformer, opening the transformer by unscrewing bolts from the top cover of the transformer, draining out of transformer oil into a container upto required level for arresting the leakage in the transformer, taking down of unserviceable HV and LV bushes from the transformer if necessary, replacement of top cover gasket, HV and LV side bushes gasket, buchholz relay gasket, bolts, nuts and washers, with new ones required. Soldering work if necessary while fixing the bushes, and re-fixng the same for transformer of capacity upto 250 KVA complete including testing the transformer after repairs all as specified and directed.Note : (i) HT / LT metal studs, HT / LT bushes and gaskets of HT and LT side will be measured and paid for seperately as supply only under Sl Nos 5 to 16 here-in after.(ii) Nuts, bolts, washers, petrolium jelly, grease, CTC required are deemed to be included in the unit rate quoted. (iii) Filteration of drained out transformer oil will be measured and paid for separately. |
| 13 | All as per item No. 11 above but for capacity above 250 KVA and upto 500 KVA |
| 14 | All as per item No. 11 above but for capacity above 500 KVA and upto 1250 KVA |
| 15 | Supply only LT bush rods with metal parts suitable for transformers of any make and of capacity upto 250 KVA all as specified and directed by Engineer-in-Charge. |
| 16 | All as per item No.14 above but of capacity above 250 KVA and upto 500 KVA. |
| 17 | All as per item No.14 above but of capacity above 500 KVA and upto 1250 KVA. |
| 18 | Supply replace HT bush rods with metal parts suitable for any make of transformers upto 250 KVA capacity all as specified and directed by Engineer-in-Charge |
| 19 | All as per item No.17 above but of capacity above 250 KVA and upto 500 KVA. |
| 20 | All as per item No.17 above but of capacity above 500 KVA and upto 1250 KVA. |
| 21 | Supply and replace set of top cover gasket for transformers of capacity upto 250 KVA all as specified and directed by Engineer-in-Charge. |
| 22 | All as per item No.24 above but of capacity above 250 KVA and upto 500 KVA. |
| 23 | All as per item No.24 above but of capacity above 500 KVA and upto 1250 KVA. |
| 24 | Disconnecting the electric supply, removing the HT cable connections of the defective Distribution transformer 11 / 440 V upto 1250 KVA capacity, outdoor / indoor type any make, taking down from platform with the help of crane suitable for lifting upto 1500 KVA Transformer or using lifting jacks, loading into goods carrier with load capacity to load upto 1500 KVA Transformer and transporting the same carefully to workshop for necessary repairs, taking all necessary precautions to avoid possible damage during transit and returning the same after carrying out repairs and re-installation at the same location using crane, re-establishing connections on HV and LV sides complete all as directed.Note: Hire charge for crane and Trailer, charges for loading / unloading and transportation are deemed to be included in quoted rate. Any damage to the transformer by the contractor during dismantling, transporting and re-assembling of transformer shall be made good without any extra cost to government. Decision of Accepting Officer shall be final and binding. |
| 25 | Opening top cover upto 1250 KVA capacity transformer, opening of top cover and draining out the Transformer oil, removing the inspection cover, lifting the core with suitable crane and cleaning all healthy parts including coils, laminations, tank, tap changer including sleeves, drying of assembled core and winding in oven upto required IR values, re-assembly of transformer by tanking the dried core and winding assembly, fixing of all oil valves, fittings of accessories, making terminal connections to external bushings, including painting of transformer tank externally with two coats of enamel paint and internally with two coats oil resistant paint, complete Routine tests, replacing unserviceable LV / HV bushings, washers, oil seal, gaskets of inspection cover, radiators, HT Cable box, LT cable box with new ones if necessary complete all as specified and directed. |
| 26 | Note : (i) HV / LV bush, copper insulation of LV / HV, transformer oil, LV / HV coils, oil seal gaskets of inspection cover, radiators, HT Cable box, LT cable box will be measured and paid separately as 'Supply Only' under relevant items. Labour elements for fixing of spares / parts mentioned as 'Supply only' is deemed to include in the unit rate quoted. (ii) Transportation to Workshop and return will be measured and paid separately. (iii) Testing of transformer as specified at Sl item No 38 of BoQ will be measured and paid separately. |
| 27 | (iv) Any hardware and minor items like nuts, bolts, washers, petroleum jelly, grease, CTC required for complete job are deemed to included in the quoted rate. (v) Filtration of transformer oil at site after installation will be measured and paid separately but for carrying out Routine tests after repairs in workshop shall be deemed to included in quoted rate. (vii) Contractor shall submit 12 months guarantee for no oil leakage in transformer from certified date of commissioning of transformer and if any defects are noticed during this period the same shall be rectified free of cost. (viii) Painting, oven charges, labour for replacement of gasket, LT / HT bushes and breathers are measured and paid seperately |
| 28 | M & L for providing of new LV Coil re-insulation in place of damaged coil |
| 29 | M & L for providing of new HV Coil re-insulation in place of damaged coil |
| 30 | Providing of new copper winding in place of damaged winding for HV |
| 31 | M&L for conducting the following tests after repairs of transformers upto 1000 KVA including submitting the test report. (i) I.R values of HV to LV, HV to Earth and LV to Earth. (ii) winding resistance. (iii) Ratio test (iv) No-load test (v) Short circuit test (vi) Dielectric strength of oil (vii) Transfomer tap switch positionsNote : contractor shall arrange all measuring instuments/equipment for testing of transformer. |
| 32 | Taking out the Vacuum Circuit Breaker (VCB) of 11KV Voltage rating 400/630/800/1250 Amps, 3 phase, 50Hz from 11 KV HT panel board for overhauling of VCB, carrying out visual check of panel, inspect, clean and tightening of bolts of busbar chamber, cleaning and inspecting CT & PT's, checking cable tightness, control circuit and servicing of VCB for the following :- |
| 33 | (a) Drawout mechanism |
| 34 | (b) Driving mechanism |
| 35 | (c) Cleaning of insulated parts |
| 36 | (d) Functional testing of VCB |
| 37 | (e) Measuring of IR values and contact resistance, checking of inner lock within panel board, checking of indicating lamps and zero error of all accessories, cleaning dusting, physically checking for any damages, tightening of bolts, nuts, greasing and lubricating by SIEMENS grease of all moving parts, lubricating spring charge mechanism by suitable oil, checking and tightening of control wiring for its normal functioning, applying petroleum jelly for top and bottom arm, female contacts and jaw contacts, checking of ON / OFF mechanism, mechanically by removing control plug under test condition and by operating the breaker tripping coil, closing coil manually. |
| 38 | (f) Checking of breakers closing and tripping operation through protecting relays (both overload and earth fault relays) meggaring the breakers, vacuum interrupter bottles, checking ON / OFF indicators, replacing unserviceable parts viz indicating lamps, Ammeter, Voltmeter, TNC switch, vacuum interrupter bottles, rotary / selector switches, strip heater, body insulators, insulating rods etc., to make VCB in trouble free condition, assembling the VCB, testing and commissioning the system complete all as per manufacturers instructions and as directed. |
| 39 | (g) Note : Replaceable parts will be measured and paid separately under respective items and the labour element for taking down and fixing is be deemed to be included in the quoted rate. (ii) Overhauling should be done through authorized OEM or channel partner of OEM or State Government Approved License holder.(VCBs of make : Schneider Electric, Siemens, Crompton Greaves, Areva, Kirloskar and Alstom ) |
| 40 | (h) No payment shall be made towards this item till submission of satisfactory test report duly verified by Engineer-in-Charge. |
| 41 | Testing and calibration of 11 KV HT VCB panel protection relays, over current / earth fault, tripping and closing circuits by primary and secondary injection method for their optimal tripping and closing performance including resetting of the time whenever required including submission of test report in duplicate complete all as directed. |
| 42 | Note : (a) Measuring instrument required for calibration and testing shall be arranged by the contractor without extra cost. |
| 43 | (b) Calibration should be done by OEM / State Electricity Board licensed service Engineer. |
| 44 | (c) No payment shall be made towards this item till submission of satisfactory test report duly verified by Engineer-in-Charge. |
| 45 | Supply & fix in repairs LED indicating lamps of red / yellow / blue / green / amber with bulbs complete all as specified.Make : AE / IMP / MECO / L&T / SIEMENS / C&S |
| 46 | Supply & Fix in repairs digital / analog type Single phase Ammeter / Voltmeter, square type of size 96 x 96 mm with CTs of suitable ratio all as specified. Make : L&T / AE / MECO / SIEMENS / RISHABH / CONZERV / ENERCON |
| 47 | Supply & Fix in repairs digital / analog type Three phase Ammeter / Voltmeter, square type of size 96 x 96 mm with CTs of suitable ratio all as specified. Make : L&T / AE / MECO / SIEMENS / RISHABH / CONZERV / ENERCON |
| 48 | Supply, repair / replacement of unserviceable epoxy body complete of VCB at Sub Station all as specified and as directed. |
| 49 | Supply & Fix in repairs TNC (Trip Neutral Close) switch for HT VCB all as specified. |
| 50 | Supply & Fix in repairs Rotary / Selector switch, 4 position for Ammeter / Voltmeter all as specified. |
| 51 | Supply & Fix in repairs panel type strip heater 80 W capacity all as specified. |
| 52 | Supply & Fix in repairs thermostat all as specified. |
| 53 | Supply & Fix in repairs 11KV, 400 / 630 / 800 Amps HT VCB Vacuum Interrupter Bottles complete all as specified. |
| 54 | Supply & Fix in repairs 11 KV HT VCB panel body insulators of existing size complete all as specified. |
| 55 | Supply & Fix in repairs 110 Volts DC Shunt Trip Coil complete all as specified. |
| 56 | Supply & Fix in repairs 110 Volts DC Closing Coil complete all as specified.Make for item 6 to 13 : Schneider / ABB / ALSTOM / CG/ Kirlosker / Siemens / Areva / AE /GE / C&S / L&T / Switron / IndoAsian |
| 57 | S&F in repairs of Auxiliary Power Supply system of 110 Volts for protection of VCB panel including synthetic rubber chamber, testing and commissioning complete by using a set of 55 No maintenance free lead acid batteries of 2 volts 80AH capacity each complete all as specified and directed.Make of Battery : AMARARAJA / EXIDE Note : Quoted rate shall deemed include cost of 55 No battery bank for each auxiliary power supply system |
| 58 | S&F in repairs, of battery charger of battery banks, 110V DC 20 A float cum boost charger control supply including testing the battery charger complete all as directed. |
| 59 | Inspection, man day service charges and overhauling charges for Auxiliary power supply and battery charger of battery banks, including checking and repair of float mechanism, booster mechanism, replacement of burnt PCBs, rectifiers, contacts (of any type and rating), control wiring with existing rating of copper cable, replacement of lugs, indicators, switches etc., including testing the battery charger after repair complete all as directed. |
| 60 | Taking out unserviceable FRP bushing 11 KV from the panel, supply and fix new FRP bushing complete all as specified and directed |
| 61 | Disconnecting electric supply to HT VCB, removing the unserviceable spring charge gear, supply and fix new Spring Charge Gear and reconnecting to power supply including testing complete all as directed.Make : Crompton Greaves or equivalent as approved by GE |
| 62 | Complete removal of existing paint from HT 6 pole structure including all connected mild steel structures and applying two coats of aluminium paint over a coat of red oxide primer, marking the pole in white capital letters including painting the pole with black bituminous paint from ground level to a height of 1.5 metre and marking two No alternative yellow strips of 300mm high on black painted portion of the pole with yellow synthetic enamel paint at a height of 0.3 metre and 0.9 metre from ground level complete all as specified and directed. |
| 63 | All as per item No 48 above but for HT 4 pole structure. |
| 64 | All as per item No 49 above but for HT 2 pole structure. |
| 65 | M&L Complete removal of existing paint from HT mild steel single electric pole 11 metre long and connected cross arms, pipe etc., and applying painting two coats of aluminium paint over a coat of red oxide primer including marking the pole in white synthetic enamel paint with capital letters and painting the pole with black bituminous paint from ground level to a height of 1.50 metre and fixing with two Nos yellow radium strips of 100 mm high at a height of 1.20 metre and 1.40 metre from ground level complete all as specified and directed. |
| 66 | Taking out the sample of transformer oil from Distribution Transformer and conducting the Dielectric Strength (BDV) test, Sludge and Acidity test from Power Grid Lab and submit the report complete all as directed. |
| 67 | Supply, install, test and commissioning of Air Break Switch, Gang Operated, triple pole, rocking type, mechanically operated, mounted on six insulators (2 No insulator in each phase) with aluminium jumpers of suitable size etc., and mild steel galvanized steel frame with operating mechanism worked from ground level including operating rod for current rating upto 200 Amps, 11000 Volts complete with locking arrangement, mild steel clamps, bolts, nuts and washers etc., complete including taking down unserviceable Air Break switch, GOD after disconnecting electrical connections all as specified and directed. |
| 68 | Disconnecting and taking out defective 11KV Air Break Switch assembly from HT 2 pole/4 pole structures, scrubbing and cleaning dust / carbon deposits from all GI / copper moving and fixed parts with sand papers / clothes and greasing / lubricating the moving / fixed linkage, necessary welding to mild steel structure / GI tubings if required, refixing the same in position with new connecting jumpers, bolts, nuts, washers of suitable size, replacement of defective moving and fixed contacts for proper operation of GOD, including testing and commissioning etc., complete all as specified and directed. Note : (a) Replacement of unserviceable spare parts such as fixed and moving contacts and insulators will be measured and paid separately. (b) The cost of any other spare parts which are not covered in Note No 35 (a) above but are required to make the GOD serviceable condition is deemed to be included in the quoted rate. |
| 69 | Supply & Fix in repairs, female contact suitable for 11KV, 200Amp horizontally operated gang operated device complete all as directed. |
| 70 | Supply & Fix in repairs, moving male contact suitable for 11KV, 200Amp horizontally operated gang operated device complete all as directed. |
| 71 | M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI strip 25 x 4 mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed. |
| 72 | Note 1 : The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20 mm graded stone aggregate cover slab reinforced with 6 Nos of 8 mm dia TMT bars both ways, funnel with watering pipe 20 mm dia medium grade, GI protection pipe light grade 40 mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 422 of SSR Part-II. |
| 73 | Note 2 : Earthing lead beyond 7.5m will be measured and paid separately. |
| 74 | S&F GI Earth strip 25 x 4mm as in earth continuity conductor fixed to wall on battens or buried on ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing complete all as specified and directed. |
| 75 | M&L in repairs, Earthing complete with copper earth plate electrode of size 600 x 600 x 3.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to copper strip 20 x 3 mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed. |
| 76 | M&L, copper earth strip 20 x 3 mm buried in ground or fixed on wall or drawn through pipe or fixed to poles or any other indicated situation for earthing complete all as specified and as directed. |
| 77 | Disconnecting the defective RMU from the main supply, service engineer to be checked / inspected the RMU and including testing and commissioning the defective RMU in its original position and charged. Note : (a) Replacement of unserviceable spare parts will be measured and paid separately. |
| 78 | Overhauling of Ring Main Unit, 11 KV, voltage rating 400 / 630 / 800 / 1250 Amps, 3 phase, 50Hz, carrying out visual check of panel, inspect, clean and tightening of bolts of bus bar chamber, cleaning and inspecting CT & PT, checking cable tightness, control circuit and servicing of breaker for the following:- |
| 79 | (a) To check the over current and earth fault relays testing with Primary current injection |
| 80 | (b) To test current transformer ratio |
| 81 | (c) Cleaning of insulated parts |
| 82 | (d) Functional testing of Ring Main Unit |
| 83 | (e) Measuring of IR values and contact resistance, checking of inner lock within panel board, checking of indicating lamps and zero error of all accessories, cleaning dusting, physically checking for any damages, tightening of bolts, nuts, greasing and lubricating by SIEMENS grease of all moving parts, lubricating spring charge mechanism by suitable oil, checking and tightening of control wiring for its normal functioning, applying petroleum jelly for top and bottom arm, female contacts and jaw contacts, checking of ON/OFF mechanism mechanically by operating the breaker tripping coil, closing coil manually, checking of breakers closing and tripping operation through protecting relays (both over load and earth fault relays) meggaring the breakers, vacuum bottles checking ON/OFF indicators, replacing unserviceable parts i.e. indicating lamps, ammeter, voltmeter, ON/OFF switch, vacuum bottles,, strip heater, body insulators, insulating rods etc to make RMU in trouble free condition, assembling the breaker, testing and commissioning the system complete all as directed. |
| 84 | Notes : (i) Replaceable parts will be measured and paid separately under supply only items and the labour component for taking down and fixing shall be deemed to be included in the quoted rate. |
| 85 | (ii) Overhauling should be done through authorized OEM or channel partner of OEM or State Government approved License holder.Make of RMUs : Siemens, Areva, CG |
| 86 | Surface dressing not exceeding 15 cm deep in hard/dense soil including separating and pick and staking stone aggregate aside for reuse including spreading out the taking out materials such as aggregate and sand etc.in the installation yard of transformer/two/ four pole structure all as directed at site. |
| 87 | M & L for broken stone / boulders, hardcore of guage exc 40 mm but n exc. 80 mm, deposited, spread and levelled in layers n exc. 15 cm thick, to a true surface filling in four pole /two pole structure transformer area complete all as specified. |
| 88 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in hard/dense soil all as directed. |
| 89 | Returning and refilling of excavated soil upto a depth of 30 cm after riddling the excavated soil for laying underground cables and post holes all as specified and as directed. |
| 90 | Removing excavated material not exceeding 50 mtr distance and depositing where directed at a level not exceeding 1.5 mtr above the starting point. |
| 91 | Earth cushioning to UG cables using excavated soil riddled by using large sieve to separate the composite particles/roots etc and refilling in trenches all as specified and as directed. Note: Punned thickness will be measured for payment. |
| 92 | Supplying and laying un-reinforced precast concrete cable cover class HV, type 1, flat size 300x180x40mm for cable protection. |
| 93 | M&L for dismantling / cutting of existing road / path / hard standing cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) suitable for laying cable protection pipe 50 / 80 / 100 mm dia under the road / path / hard standing complete. |
| 94 | Material and labour for PCC (1:2:4) type B-2 (using 40 mm graded crushed stone aggregate) for making good the disturbed surface of road/path/hard standing by using cement contrete mortar 1:2:4 type B1, using 40 mm graded stone aggregate 0.45 mtr wide and 0.15 mtr thick complete all as specified and directed. including demolition of old PCC and removing the debris from site complete all as specified and as directed at site by the Engr-in-Charge. |
| 95 | Supply and laying 80 mm bore GI tubing 'light grade' with all fittings for cable protection fixed on poles/walls/laid under road crossing or floor including making good the disturbed surfaces/area including taking down of old unserviceable complete all as directed. (Make: TATA/JINDAL/ZENITH/SWASTIK/PRAKASH) |
| 96 | Supply, laying and testing and commissioning XLPE insulated screened PVC bedded, galvanised steel strip electric power cables (heavy duty) armourmed cable 11000 volts grade with aluminium conductor of size 3 core 185 sqmm laid in trenche, fixed to wall / drawn through pipe and incl the distrubence surface of road making good with using PCC, fixing the cable with suitable size glands, crimping type lugs etc all as specified and directed.(Make : HAVELLS/finolex/universal/Polycab/ASIAN/GLOSTER)NOTE : - Earth work and excavation shall be measured and paid separately. |
| 97 | Supply & Fix in repairs digital protection relay of any type of size suitable for 11KV VCB of capacity upto 800 Amp operation voltage of 110V including caliberation and setting complete all as specified by Engr-in-Charge Make : L&T / Schneider/ MiCOM / SIEMENS / ABB /Ashida Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender