Tender For Repair/ Maintenance To Lt Oh Lines, Ug Cables, Servo Voltage Stabilizer, Isolation Transformers And Other Connecting Items At Af Stn Sarsawa Under Ge (Af) Sarsawa
Tender Value
45 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
13 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Lt Oh Lines, Ug Cables, Servo Voltage Stabilizer, Isolation Transformers And Other Connecting Items At Af Stn Sarsawa Under Ge (Af) Sarsawa
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft/loose soil not exc 1.50 mtrs wide and not exc. 1.5 mtr deep and getting out for taking out/laying cable, pole & stay etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Excavating over areas, exc 1.5 m deep and not exc 3 mtrand getting out in soft/loose soil complete all as specified and directed. |
| 3 | Returning, filling in, incl spreading leveling, watering and well raming in layers not exc 25 centimetre thick in layer in any type of soil complete all as specified and as directed. |
| 4 | Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and directed Engr-in-Charge. |
| 5 | Material labour for common burnt clay bricks, sub class 'B' grade laid in trenches for protection of UG cables perpendicular to the direction of the cables complete all as specified and as directed by Engr-in-Charge. |
| 6 | Material and labour for sand cushioning with layer of dry, clean & fine sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and as directed by Engr-in-Charge. |
| 7 | M&L for defect rectification HT/LT cable laid in trenches by locating fault with the help of electronic fault locating machine comprising of surge generator pulse,cable route tracer, ECHO fault locator with high frequency distance calculator etc.including and additional excavation in normal alluvial strata required for exposing the cable fault removal of deteriorated portion of cable treating of cable and keeping the same ready for jointing work for cable of size up to 400 Sqmm. The fault locating equipments will be brought to site within 24 hours of instruction from Engineer-in-Charge complete all as specified and directed.Note:- Supply and fixing of cable joint shall be measured and paid saperately under respective item of schedule. |
| 8 | Supplying, laying, jointing , testing and commisssioning in replacement underground XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured , electric power cable (heavy duty) 1100 volt grade with size of 10 Sqmm 4 core confirming to IS: 7098 Part-I ammended upto date, laid in trenches, along pole/wall/across road etc as per site condition complete all as specified and directed.Note:- Exacavation/Earth work , brick & sand protection shall be measured and paid saperately. |
| 9 | All as per Item No 8.00 here-in-above but cable of size 16 Sqmm 4 core complete all as specified and directed. |
| 10 | All as per Item No 8.00 here-in-above but cable of size 25 Sqmm 4 core complete all as specified and directed. |
| 11 | All as per Item No 8.00 here-in-above but cable of size 35 Sqmm 4 core complete all as specified and directed. |
| 12 | All as per Item No 8.00 here-in-above but cable of size 50 Sqmm 4 core complete all as specified and directed. |
| 13 | All as per Item No 8.00 here-in-above but cable of size 70 Sqmm 4 core complete all as specified and directed. |
| 14 | All as per Item No 8.00 here-in-above but cable of size 95 Sqmm 4 core complete all as specified and directed. |
| 15 | All as per Item No 8.00 here-in-above but cable of size 120 Sqmm 4 core complete all as specified and directed. |
| 16 | All as per Item No 8.00 here-in-above but cable of size 150 Sqmm 4 core complete all as specified and directed. |
| 17 | All as per Item No 8.00 here-in-above but cable of size 185 Sqmm 4 core complete all as specified and directed. |
| 18 | All as per Item No 8.00 here-in-above but cable of size 300 Sqmm 4 core complete all as specified and directed. |
| 19 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape PVC sheathed 4 sqmm 2 core nominal cross section in service connection/light connections in poles from juction box to fittings complete all as specified and directed by Engr-in-charge. |
| 20 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape PVC sheathed 6 sqmm 2 core nominal cross section in service connection/light connections in poles from juction box to fittings complete all as specified and directed by Engr-in-charge. |
| 21 | M&L in replacement of Straight through / end joints heat shrinkable for XLPE/PVC insulated and sheathed aluminium conductor under ground cable 1100 Volts 3.5/ 4 core 06 sqmm to 16 sqmm and testing after jointing complete all as specified and directed. |
| 22 | All as per Item No 21.00 here-in-before but for cable of size 3.5/4 core 25 sqmm to 50 sqmm complete all as specified and directed. |
| 23 | All as per Item No 21.00 here-in-before but for cable of size 3.5/4 core 70 sqmm to 120 Sqmm complete all as specified and directed. |
| 24 | All as per Item No 21.00 here-in-before but for cable of size 3.5/4 core 150 sqmm to 185 Sqmm complete all as specified and directed. |
| 25 | All as per Item No 21.00 here-in-before but for cable of size 3.5/4 core 240 sqmm to 300 Sqmm complete all as specified and directed. |
| 26 | Labour for angering upto 100 mm bore for road crossing 3 mtr to 10 mtr not exceeding 1.5 mtr in depth for laying of electric cable and GI tubing in soft/loose soil complete all as specified and directed. |
| 27 | Supply and laying in replacement of 63/50 mm outer dia/ inner dia, double walled, corrugated DWC duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and directed. |
| 28 | Supply and laying in replacement of 90/76 mm outer dia/ inner dia, double walled, corrugated DWC duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and directed. |
| 29 | M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) for foundation of poles complete all as specified and directed. |
| 30 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) for foundation of stay/panal complete all as specified and directed. |
| 31 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for copping of poles/stay/panal complete all as specified and directed. |
| 32 | Dismantling of old vintage steel tubular poles alongwith insulators and disposing off from site complete all as specified and directed. |
| 33 | Supply, transporting to site, errecting and fixing in position 9 metre long, Steel tubular swaged poles complete with cast iron/mild steel base plate, finial taper plug, bolts, nuts washers & screws as specified, type 410, SP-31 IS 2713 marked, drilling of necessary hole including painting to steel tubular poles, with two coats of aluminium paint over a coat of red oxide primer on exposed surface of poles and with black bituminous paint on portion of pole embedded in concrete and painting 3 Nos bands/strips with fluorescent PO red synthetic enamel paint 30 cms wide strip at 30 cms spacing from plinth block and numbering of poles complete all as specified and directed by Engineer-in-Charge. |
| 34 | M&L in replacement of stay assembly using GI stay rod 16 mm dia complete with accessories excluding stay wire 7/4 mm dia shown in electrical plate no 1 of SSR part 1 of 2009 (loop type insulators ,stay clamps excavation, stay clamp and concrete measure separately complete all as specified and directed. |
| 35 | M & L in replacement of galvanized stay wire of size 7/3.15 mm with new one complete all as specified & directed. |
| 36 | Supply and fixing in replacement of pin type insulator vitreous, porcelain, white, brown or green with overall dimensions 90 X140 mm and clearance dia of hole 25.5mm after taking down/out insulator as existing at site complete all as specified and directed. |
| 37 | S&F Loop type insulator, vitreous porcelain, white, brown or green small size, with overall dimensions 65 x 90mm, clearance of hole 16m complete all as specified and directed. |
| 38 | Re-stretching/ tightening of ACSR conductor of any size of LT overhead line on existing poles duly straining properly binding with extra aluminium binding wire to insullators complete all as specified and directed. |
| 39 | M&L for Cleaning & preparation of surface of the LT steel tubular poles with emmery paper filling of uneven surface with suitable filler and painting with two coat of aluminium paint including cross arms, brackets, hooks, junction box, stay clamps over a coat of red oxide primer and making blue & white strip 30cm wide strip (5 Nos) upto 1.5 m from PCC coping, above 1.5 m height in and including marking and numbering of poles complete all as specified and directed. |
| 40 | M&L for Cleaning & preparation of surface of the LT PCC poles and painting with two coat of aluminium paint to cross arms, brackets, hooks, junction box, stay clamps, with two coats of exterior cement base paint to pole and making blue & white strip 30cm wide strip (5 Nos) upto 1.5 m from PCC coping in and including marking and numbering of poles complete all as specified and directed. |
| 41 | Labour only for prunning of tree branches from the site touching/embracing LT overhead lines in order to maintain a clearence of 2 mtr on either side of the conductors incl removing the tree branches from site to out side Air force stn complete all as specified and directed. |
| 42 | Supply only 25 mt long 2.5 cm wide and at least 0.125mm wall thickness PVC tape of good quality complete all as specified and directed. |
| 43 | Supply only 25 mt long 2.5 cm wide and at least 0.200mm wall thickness HT tape with adhesive of good quality complete all as specified and directed. Please Enable Macros to View BoQ information |
| 44 | Supply only 25 mt long 2.5 cm wide and at least 0.200mm wall thickness HT tape with adhesive of good quality complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender