Tender For Special Repair To Bldg No P-45 Of 24 Guards (17 Grenadiers) At Pokaran Military Stn
Tender Value
9.61 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
13 days left
EMD
19240
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-45 Of 24 Guards (17 Grenadiers) At Pokaran Military Stn
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | M/L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite or coloured cement to match, including 15mm thick screed bed in CM 1:6 laying floor finishesed complete all as specified and directed. |
| 3 | . --Ditto-- all as per above but as in skirting over & including 10mm thick backing coat of CM 1:4 all as specified. |
| 4 | S&F Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specifed and as directed. |
| 5 | M&F glazed ceramic coloured tiles (300mmx 450mmx7 mm) in vertical surfaces jointed in neat cement slurry and pointed in white cement. Incl cutting the tiles to the required size whereven required incl mitring the corners etc over 10 mm thick backing coats of cement plaster in CM (1:4) complete all as specified and directed. |
| 6 | Taking down chowkhat or frame existing doors/windows/ventilators (without taking off shutters and guard bars) of n exe 1.5 sqm complete all as specified and as directed incl stacking the materials properly. |
| 7 | S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and as directed. As approved by Engr-In-Charge |
| 8 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to either with solvent cement, suppling & fixing in the frame at site as per specification incl the fwg S & F As approved by Engr-In-Charge(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf |
| 9 | Taking down chowkhat or frame existing doors/windows/ventilators (without taking off shutters and guard bars) of exe 1.5 sqm & n. exc 4 sqm etc complete all as specified and as directed incl stacking the materials properly. |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of Frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 11 | S & F toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes with all accessories like handle, stopper with glazing with beads fixed with metal panel pins (beads to be measured separately as 'supplied only') as required including hacking out out glass |
| 12 | S & F in repair Double action floor spring ISI marked hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified.Make : Universal / Sandhu / Godrej (ISI Marked) of equavalent as approved by Engr-In-Charge |
| 13 | S & F Factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and including supply and fixing following items As approved by Engr-In-Charge :(a) Stainless Steel (304 Grade) Finished Butt HinAGEs 125mm - 3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf |
| 14 | Providing and fixing powder coated 50 microns extruded aluminium in 3 Tier Track Sliding Windows/glazing, with frame of section 100x44-45x1.30mm, track of size 100x38.10x1.30 & shutters made of size 32x18x1.3mm, with and including 4mm thick tinted sheet glass selected quality fixed in 2 shutters and stainless steel wire gauage 0.36mm nominal dia of wire and average width of aperture 1.40mm in one shutter and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size and also including powder coated 150mm handle with built in locking system for each leaf complete all as specified.Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by Engr-In-Charge |
| 15 | S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 |
| 16 | M&L preparation of new steel surface and applying two coats of synthetic enamel paint ovre a coat of red oxide primer. |
| 17 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. Note : Work will be in patches or in bulk |
| 18 | M&L for machine cut20mm thick Granite (of any type)tiles machine cut, in skirting/dado laid over cement screedand jointed with grey cementslurry, and pointed with whitecement with admixture ofpigment to match the shade ofgranite stone including grinding including cutting and polishing types including dismantling of stone slab |
| 19 | M & L for Machine cut kota stone slab flooring 20-25mm thick for window cill, jambs and sofits over and including cement screed base 15 mm thk in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including dismantling of stone slab |
| 20 | M & L for Rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situations |
| 21 | S & F in repair Vitreous china urinal bowl type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for disCharge pipe incl necessary packing, union complete all as specified.Make : Hindware/Parryware/Cera/Jaquar as approved by Engr-In-Charge |
| 22 | S & F in repair Vitreous china premium/1st quality wash down water closet pan floor mounting (Semi-pedestal pattern (Anglo Indian) white colour including CI S/P trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect all as specified. |
| 23 | S & F in repair Flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.Make : Hindware / Parryware/Cera or equivalent as approved by Engr-In-Charge |
| 24 | S & F in repair 6mm thick of size 600x450 looking mirror fixed to wall with stainless steel plugs/connecter/ spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position all as specified and directed as approved by Engr-In-Charge. |
| 25 | S & FSteel ventilator with top hung shutter including hinges, steel peg stay, complete as specified complete all as specified and directed. |
| 26 | Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete al as specified and directed. |
| 27 | M&L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions all as specified and directed |
| 28 | S&F for Anodised aluminium snap grid of size of grid 605 x 605mm frame work for false ceiling all as specified and directed. Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm. (ii) Rate quoted by the contractor shall deemed to inclusive of frame work complete. |
| 29 | S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 30 | S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer all as specified (colour/pattern as approved by Engr-In-Charge). |
| 31 | S & F for Rotational moulded polyethylene triple layer white colour water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arranAGEments for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete . |
| 32 | S & F in repair Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, Make : Hindware / Parryware/Cera or equivalent as approved by Engr-In-ChargeNote : The items for counter will be measured and paid separately. |
| 33 | S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete. |
| 34 | S & F brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Cera cat part no F8030104 or equivalentMake : Hindware / Parryware/Cera or equivalent as approved by Engr-In-Charge |
| 35 | S & F in repair Toilet paper holder with flat recessed type stainless steel Coomplete all as specified and directed. Make - Jaguar /Marc/Prima/Cera/Perryware or equivalent as approved by Engr-In-Charge. |
| 36 | S & F in repair Angular Stop Cock, CP, fency type with wall flanage, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed as in repair in all respect all as specified.Make : Jaquar / Hindware / Cera / Prayag or equivalent as approved by Engr-In-Charge |
| 37 | Supplying and laying in repair of CPVC pipes 16mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-Charge. |
| 38 | Supply & Fixing in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc.Cera cat part no F500110 or equivalentMake : Jaquar /Hindware / Cera/ Prayag/Parryware or equivalent as approved by Engr-In-Charge |
| 39 | Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type.Make : Jaquar /Hindware / Cera/ Prayag/Parryware or equivalent as approved by Engr-In-Charge |
| 40 | S&F in repairs 15mm dia Bib tap (2 in 1 type) modle no BC-9876 of brass, chromium plated fancy type glossy finish fixed in repairs complete all as specified and directed.Cera cat part no BC-9876 or equivalentMake : Jaquar /Hindware / Cera/ Prayag/Parryware or equivalent as approved by Engr-In-Charge |
| 41 | S&F in repairs Soap disc cera cat no F5013116ch CP fixed in position complete fixed as in repair in all respect all as specified.Make : Jaquar / Hindware / Cera / Prayag or equivalent as approved by Engr-In-Charge |
| 42 | Demolition and breaking up drain PVC(SWR) pipes single socketed in any length with rubber joints all as specified |
| 43 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, as in floors or fixed to walls 75 mm bore |
| 44 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed to walls 110 mm bore |
| 45 | S&F PVC (SWR) bends any radius 75 mm bore |
| 46 | S&F PVC (SWR) bends any radius 110 mm bore |
| 47 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet 75 mm |
| 48 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 49 | M & L for Cement plastering 15mm( thick in two layers -first layer 10mm thick with ready mix plaster and outer layer 5mm thick ready mix water proof plaster) on outer walls by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS- 2250-1981 and shall confirm 28 days compressive strength 10-15 MPA, bulk density 1600-1800 kg/cum and pull out bond strength->0.5 MPA complete all as specified and directed |
| 50 | M & L for rendering 10mm thick ready mix plaster on internal wall by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS-2250-1981 and shall confirm 28 compressive days cstrength 10-15 MPA bulk dencity 1600-1800 kg/cum and pull out bond strength-> 0.5 MPA omplete all as specified and directed. |
| 51 | M & L for rendering 5 mm thick ready mix self curing plaster on ceilling by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS-2250-1981 and shall confirm 28 compressive days cstrength 10-15 MPA bulk dencity 1600-1800 kg/cum and pull out bond strength-> 0.5 MPA omplete all as specified and directed. |
| 52 | M & L for Applying 3mm thick wall care putty on wall for desired smoothness and levelling of surfaces in two or more layers) for receiving painting complete all as specified and directed. |
| 53 | M & L for Applying 3mm thick wall care putty on Ceiling for desired smoothness and levelling of surfaces in two or more layers) for receiving painting complete all as specified and directed. |
| 54 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.Make of Exterior Wall Primer : Asian / BerAGEr / Nerolac [Best Quality] or equivalent as approved by Engr-In-Charge |
| 55 | M & L for Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 56 | Dismantling Stone slabs in roofs, suspended floors , chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and as directed by the Engineer-in-Charge. |
| 57 | Demolition of concrete of any description and in any position (PCC Padding over roof) complete all as specified and as directed by the Engineer-in-Charge. |
| 58 | M&L for PCC 1:2:4 type BO using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 50 mm as per the requirements all as directed by Engr-in-Charge. |
| 59 | M&L for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPC (WPC will be measured and paid separately as supply only) |
| 60 | Supply only integral Waterproofing compound. |
| 61 | M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forced all as specified and as directed |
| 62 | M & L for 50mm thick plain cement concrete type C-2 (1:3:6) with 20mm garded stone aggregate in plinth protection complete all as specified and directed. |
| 63 | Demolition of stone masonry built in cement or cement lime mortar all as specified and directed. |
| 64 | M&L for squared rubble walling, Jodhpur type brought up to courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed. |
| 65 | M&L for squared rubble walling, Jodhpur type brought up to courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed. but except stone |
| 66 | Stainless steel tubing of 20 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed as in repair .Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered as approved by Engr-In-Charge. |
| 67 | Dismantling of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) complete all as specified and directed. |
| 68 | M/L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub bases, 75 mm thick complete. |
| 69 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extrasand |
| 70 | Providing and laying Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey pigment cement and pigments including 20 mm thick screed in cement mortar (1:6) over and pointed complete all as specified. |
| 71 | M&L For Type B1 1:2:4 (12.5 mm graded aggregate) Providing, cement concrete in kerbs of mud stops, rounded or chamfered on edges . Note: Contractor shall use Fine aggregate (M Sand) for cement concrete and mortar in masonary for above all items |
| 72 | Taking down carefully aluminium point wiring any type ,surface/concealed/ PVC capping or tubing ( including light,fan,s/socket, or power)complet fittings such as switches,ceiling rose,pendents,regulators,sockets etc complete |
| 73 | Taking down old unsv MCB DB / main switch incl MCBs / MCCBs complete all as specified and directed by engineer-in-charge. |
| 74 | Taking down and refixing ceiling fan/exhaust fan/ air circulating fan with cleaning & painting of ceiling fan complete with two coat of synthetic enamel paint of white colour by spraying including filling cavities with filler complete all as directed by E- in- charge after minor repairs |
| 75 | M & L for point wiring with two single core 1.5 Sqmm cabel (nominal area) stranded copper conductor, PVC insulated unsheathed FRLSH cable, 1100 V grade, conforming IS:694 & colour code in conduit system of wiring, drawn in and including concealed rigid PVC Conduit not less than 20 mm dia with galvanised modular metal flush box, thickness as per OEM suitable of suitabe size and modular white cover plate with frame of suitale module and wiring to be terminated in pressed steel sunken boxes including all accessories fixed with chromium plated screws and washers and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unheated FRLSH cable as in earth wire (green colour) connecteedd to common earth only complete all as specified and directed for following:- (a) One light, C/Fan, E/Fan, bell point controlled by one switch. |
| 76 | (b) All as per item no. 4 above here in before but with copper conductor cable of size 1.5 Sqmm for one 3 pin socket outlet, 5 amp on same board. |
| 77 | (c) All as per item no. 4 above here in before but with copper conductor cabe of size 2.5 Sqmm for one 3 pin socket outlet, 5 amp on independent board. |
| 78 | All as per item no. 4 above here in before but with copper conductor cabe of size 4 Sqmm for one 3 pin socket outlet, 16 amp on independent board. |
| 79 | All as per item no. 4 above here in before but with copper conductor cabe of size 6 Sqmm for one 3 pin socket outlet, 16 amp on independent board. |
| 80 | S&F bell push modular type 6A, 1 Module all as per directed and specified by engineer-in charge |
| 81 | S&F bell (buzzer / ding dong) working on 230 volts AC complete all as specified and directed by engineer-in-charge. |
| 82 | S & F for Modular switch, flush button, 1 way, 6A, 1 module, complete as specified and directed by Engineer- in- charge. |
| 83 | M & L For modular socket outlet 2/3pin, 2 module, 6Amps, 230 Volts AC, complete all as specified and directed by Engineer-in-charge. |
| 84 | M & L For modular socket outlet 2 in 1, 6 pin, 2 module, 6/16Amps, 230 Volts AC, complete all as specified and directed by Engineer-in-charge. |
| 85 | S & F for Modular switch, flush button, 1 way, 16A, 1 module, complete as specified and directed by Engineer- in- charge. |
| 86 | S & F ceiling rose surface backlite 65x50mm 3 terminals complete. |
| 87 | S & F Modular Fan step regulator, 120 W-2 module complete all as specified and directed. |
| 88 | M&L Modular white cover plate with frame ( both inner & outer plate cover) 1 module |
| 89 | M&L Modular white cover plate with frame ( both inner & outer plate cover) 3 module |
| 90 | M&L Modular white cover plate with frame ( both inner & outer plate cover) 8 module |
| 91 | Supply and fix in repair LED tube light fitting capacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector completerewired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable including taking out existing one u/s. |
| 92 | Supply and fix in repair LED tube light fitting(mirror type) capacity 10 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector completerewired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable including taking out existing u/s. |
| 93 | M&L in repair lamp holder insulated body with back plate suitable for batten fittings including takinh out existing u/s. |
| 94 | supply and fix in repair LED Lamp Retro fit type 9 watts 230 V and all as specified by Engr-in-charge including taking out existing u/s one. |
| 95 | Disconnecting outer & inner unit of Air-conditioning icluding Voltage stablizer unit of any capacity including cutting of copper tubes including shifting of outer unit from roof of the building with provision of angle iron anchor pickets made out of 25mmX25mmX5mm angle iron with suitable size of MS plate with installation of outer & inner unit of AC with the suitable space for further maintenance including necessary gas charging / topping up R-22 /R32/410C with soldering of copper tubes all as specified and directed. |
| 96 | S&F semi grouting industrial socket & plug powder coated made of CRCA sheet complete box comprised with MCB, SP 32 Amps 12 KAMP returning cap. |
| 97 | Supply, fix,in reapir connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 8 way, 415 Volts, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately. |
| 98 | S&F connecting and testing MCB Single pole (MCB SP) 6-32 Amps , 240 Volts of rupturing capacity 10 KA, C Curve type including taking out existing u/s one complete all as specified and directed. |
| 99 | S&F MCB SPN 63 A rating 240 V, 10KA, C series fixing in DB's including connecting with bottle type copper thimble including taking out existing u/s one complete all as specified and directed by Engr-in-Charge |
| 100 | S & F 15 Watt LED Bldg security light with a nominal system . The luminaire housing should be made of pressure die cast aluminimum. The total power consumption should not exceed 15W (including driver) pre wired fitted on and including two Nos PVC block of suitable l size and connection up to tube light fitting with connecting up with copper 3 core flexible cord of minimum size 0.5 Sqmm size and testing complete including LED lamp, including taking down old unserviceable fitting any type complete all as specified and as directed. |
| 101 | Earthing with galvanised iron earth plate electrode 600 x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to GI earth lead wire 4 mm dia connected to earth plate electrode by means of GI nuts, bolts & washers earth wire protected with & including 15 mm dia medium grade ISI marked GI pipe not less than 7.5 metre long all as shown in electrical plate No. 3 MES Schedule Part 1, with & including ; PCC 1:3:6 B1 reinforced with welded steel wire fabric not less than 4 Kg per Sq M, watering arrangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with mixture of common salt & charcoal, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete. (Note :- GI earth wire with GI pipe protection beyond 7.5 metre measured & paid separately and it includes taking down old existing earthing.) including taking out existing u/s earthing. |
| 102 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular of size 10 sqmm complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender