Tender For Special Repair To Bldg No. Owt-91 To Owt -98 And Special Repair/Replacement Of Unsv Internal Fittings/Fixtures And Rewiring Of Old Unsv/Burned Wires Alongwith Connected Misc Items Of Bldg No. Owt-185,Owt-186,Owt-187,Owt-188.Owt-189 & Owt-2
Tender Value
47.96 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
16 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Papum Pare → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No. Owt-91 To Owt -98 And Special Repair/Replacement Of Unsv Internal Fittings/Fixtures And Rewiring Of Old Unsv/Burned Wires Alongwith Connected Misc Items Of Bldg No. Owt-185,Owt-186,Owt-187,Owt-188.Owt-189 & Owt-222 At Borarupak Mil Stn Under Ge 872 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish complete all as specified and directed. |
| 2 | Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and disposal of debris and rubbish to a distance complete all as directed. |
| 3 | Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 4 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish complete all as specified and directed |
| 5 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges and keeping serviceable sheets in safe custody for reuse in the work complete as directed. |
| 6 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 7 | Taking up or down steel tubing /PP-R pipes & connection including cleaning for refixing for 15 mm or removal to store as directed. |
| 8 | Taking up or down steel tubing /PP-R pipes & connection including cleaning for refixing for 20 mm or removal to store as directed. |
| 9 | Taking down eaves gutters and rainwater/soil/waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed |
| 10 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, cable etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 11 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed. |
| 12 | Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 13 | S & in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 14 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 15 | S&F Plain Colour Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed. |
| 16 | S & F 100 mm long, stainless steel butt hinges fixed with stainless steel hinge pin etc complete all as specified and directed. |
| 17 | S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 18 | S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 19 | S & F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/vally gutter, fixed with self tapping screws as per manufacturer's instruction complete all as specified and directed. |
| 20 | M&L Rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality A complete all as specified and directed. |
| 21 | S&F Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut toordinary lengths i.e. within 20mm of the length indicated) etc. (Grade Fe 290 E165) complete all as specifed and directed. |
| 22 | M & L 25 mm thick cement concrete 1:2:4 type B-1( using 20 mm graded stone aggregate as in sub base flooring ,complete all as specified & directed. |
| 23 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed. |
| 24 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 25 | M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed. |
| 26 | M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 27 | M&L for Preparation of old plastered surfaces or unplastered surfacesof walls by brooming down or stell wire brushing , removal of existing Treatment of old decorated Surfaces of Walls and applying one Coats of Cement based Paint on walls , complete all as specified and as directed. |
| 28 | M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed. |
| 29 | M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 30 | S & F in repair 15 mm bore, Stop/angle valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 31 | S & F 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repair complete all as specified and directed. |
| 32 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 1000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 33 | S&F in repair Vitreous China wash down water closet pan (ISI Marked, Ist Quality) including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed. |
| 34 | Supply and fix in repairs Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed. |
| 35 | Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. |
| 36 | S&F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed. |
| 37 | S & F in repair 20 mm bore, gun metal Gate valves, with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed. |
| 38 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipewith 1.2 Meter Long PVC Tube & Wall Hook including making connections and fixed in position complete in all respect as specified. |
| 39 | M&L for Plain Concrete bed Type C-2 (1:4:8) (Using 40mm graded crushed stone aggregate) to 110mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed |
| 40 | S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 41 | S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. |
| 42 | S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 43 | Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes, complete all as specified & directed. |
| 44 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including making good the disturbed surfaces to match with the existing finishes, complete all as specified & directed. |
| 45 | Taking out old unserviceable/burnt submain wiring of any size and making good the disturbed surfaces, complete all as specified and directed. |
| 46 | M&L for Point wiring with 1.5 Sq mm copper conductor single core flame retardant PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC caping and casing surface type and accessories of suitable size ISI marked and as per site requirement Modular Metal flush box, 2 to 6 module for mounting the switches/sockets/regulators/ceiling rose etc including running up of 1.5 Sq mm copper conductor flame retardant PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for One light/ceiling fan/exhaust fan point controlled by one, one way switch, 5 Amps with cable 1.5 sqmm size , complete all as specified & directed. |
| 47 | All as per item No. 4.00 above but for One 3/5 pin socket outlet 6 amps point on same board complete ditto , all as specified & directed. |
| 48 | All as per item No. 4.00 above but for One 3/5 pin socket outlet 6 amps on independent board complete ditto, all as specified & directed. |
| 49 | All as per item No. 4.00 above but for One bell/buzzer point controlled by one push button on the same board with other switches or independent complete ditto, all as specified & directed. |
| 50 | Description all as per item No-4 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket, Independent incl running of 1.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly ,complete all as specified & directed. |
| 51 | S&F Modular Switch, 1 way, 6 Amp, 1 module complete all as specified and directed. |
| 52 | S&F Modular Switch, 1 way, 16 Amp, 1 module complete all as specified and directed. |
| 53 | S&F Modular Socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and directed. |
| 54 | S&F Modular Socket outlet 2 in 1, 3 pin, 6 and 16 Amp flush type complete all as specified and directed. |
| 55 | S&F Modular Bell push, 6 Amp, 1 module complete all as specified and directed. |
| 56 | S&F Bell Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed. |
| 57 | S&F Ceiling Rose, PVC/polycarbonate, isolated body 3 terminal complete all as specified and directed. |
| 58 | S&F Modular Fan step regulator, 120W - 2 module complete all as specified and directed. |
| 59 | S&F Lamp holder, PVC polycarbonate type with back plate suitable for batten/angular fittings complete all as specified and directed. |
| 60 | S&F LED Bulb 10 Watt complete all as specified and directed. Make :- Luker/Crompton/Philips/Havells or equivalent of approved make. |
| 61 | S&F LED Bulb 15 Watt complete all as specified and directed. Make :- Luker/Crompton/Philips/Havells or equivalent of approved make. |
| 62 | Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 63 | Supply only for fixed in repair of LED Panel/Down Light of capacity 1 x 6 Watt, Trimless surface, Round LED Panel, 230 Volt, Indoor Recess mounting Down Light with Reflector and Detachable Tray with LED Lamp, Electronic Driver, Connector Blocks, etc., complete with all Accessories, Pre-wired, connecting up with and including suitable size 2/3 Core Twisted Flexible Copper Conductor Cable complete all as specified and as directed. |
| 64 | All as per Item No-63, but of capacity 1 x 18 Watt complete all as specified and as directed. |
| 65 | Supply only for fixed in repair of LED Panel/Down Light of capacity 1 x 6 Watt, Trimless surface, Square LED Panel, 230 Volt, Indoor Recess mounting Down Light with Reflector and Detachable Tray with LED Lamp, Electronic Driver, Connector Blocks, etc., complete with all Accessories, Pre-wired, connecting up with and including suitable size 2/3 Core Twisted Flexible Copper Conductor Cable complete all as specified and as directed. |
| 66 | All as per Item No-65, but of capacity 1 x 18 Watt complete all as specified and as directed. |
| 67 | S&F LED Tube Light Fitting 1 x 20 Watt, 220 Volts, AC decorative box type with driver, holder incl LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 68 | S&F LED light fitting 1x9/10 Watt Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 69 | S&F Single pole enclosure with a two pin and earth plug and socket (AC Box) complete with one single pole MCB 20 Amps complete all as specified and directed. |
| 70 | M & L Submain wiring with 2 runs of single core 10 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid in PVC casing and caping ISI marked and its accessories including one run of single core 10 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board/Plug and Socket for AC complete all as specified and as directed. |
| 71 | S&F Sheet metal enclosures for DB, Single pole & Neutral, 12 way with 200 Amps rated bus bar, Double Door, 240 volts complete all as specified and directed. |
| 72 | Supply only for fixed in repair of DB, Single pole & Neutral, 6 way with 200 Amps rated bus bar, Double Door, 240 volts complete all as specified and directed. |
| 73 | S&F Sheet metal enclosures for DB, Single pole & Neutral, 4 way with 200 Amps rated bus bar, Double Door, 240 volts complete all as specified and directed. |
| 74 | S&F Isolator TPN, 415 volts, 63 Amps complete all as specified and directed. |
| 75 | Supply only for fixed in repair of MCB SPN, 240 volts, 32 Amps, 10 kA, 50 Hz complete all as specified and directed. |
| 76 | S&F MCB SP, 240 volts, 6-32 Amps, 10 kA, 50 Hz complete all as specified and directed. |
| 77 | M&L for sand cushioning using dry and clean tibba sand in two layers, first layers of 80 mm thick before laying of cable and second layer of 150 mm thick after laying of cable in trenches/ducts including consolidation of each layers complete all as specified and directed. Note :- Punned thickness only will be measured and paid. |
| 78 | Supply and laying well burnt/fire Bricks of size 230 x113 x 75 mm locally available best quality (sub class \\"B\\" bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified. |
| 79 | Supply and laying of XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade of size 25 Sqmm x 4 core including taking out/removing the existing old/unsv cable complete all as specified and directed . |
| 80 | Supply and laying of XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade of size 16 Sqmm x 4 core including taking out/removing the existing old/unsv cable complete all as specified and directed . |
| 81 | Supply and laying of XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade of size 4 Sqmm x 2 core including taking out/removing the existing old/unsv cable complete all as specified and directed . |
| 82 | Supply and laying of GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed of size 50 mm dia bore. Please Enable Macros to View BoQ information |
| 83 | Supply and laying of GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed of size 50 mm dia bore. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender