Tender For Repair To Fencing, Compound Wall, Hardstanding And Other Items Under Age B/R-Ii Of Ge Gwalior
Tender Value
80 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
17 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Fencing, Compound Wall, Hardstanding And Other Items Under Age B/R-Ii Of Ge Gwalior
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: HQ CWE Jhansi Name of Work: REPAIR TO FENCING, COMPOUND WALL, HARDSTANDING AND OTHER ITEMS UNDER AGE B/R-II OF GE GWALIOR Contract No: CA NO CWE/JHA/GWL/TOKEN/81 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar and removing rubbish from site complete all as specified and as directed. |
| 3 | Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable material out side from site complete all as specified and as directed. |
| 4 | Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and as directed. |
| 5 | M&L for plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and as directed. |
| 6 | M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc. including all necessary drilling, bolting or rivetting, etc., and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and as directed. |
| 7 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 8 | Supply and fixing PVC coating Chain link fencing incl line wire any mesh, size and type to any standarards, rails straining bolts, including provn of binding wire complete all as specified and as directed. |
| 9 | S&F, mild steel screw bolts (machine made) exceeding 5cm and not exceeding 10cm long with hexagonal or square heads at one end and screwed the other fitted with washer and one hexagonal or square nut complete all as specified and as directed. |
| 10 | M&L for mild steel Round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and welding with with flats of chain link fencing Fe-410 W (Gde E-250) quality-A or Fe-290 ( Gde E-165) complete all as specified and as directed. |
| 11 | S&F galvanised, 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of strandard rails straining bolts, including securing and tying at crossing with and provisioning of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (Note: Each line wire shall be measured for payment) |
| 12 | M&L galvanized Concertina coil, duly stretched, maintaing a dia of 600mm, concertina coil placed in Y shape angle iron post erected over boundary wall and fixed to angle iron with 3mm dia GI bearer wire, complete all as specified and as directed at site. |
| 13 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 14 | M&L for preparation of new steel surface of any description not exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 15 | Dismantling barbed wire fencing mesh, fixed with steel or wood fillets of any type complete all as specified and as directed. |
| 16 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in (Concrete, brick work, masonry) and making good disturbed ground, complete all as specified and as directed |
| 17 | M&L for pre stressed pre cast RCC (M-25 grade) column cross section 150mmx150mm with conineous vertical grooves of size 60mmx35mm at two sides of column to receive the precast panels including reinforced with 7 Nos wire of 3mm dia high tensile corbonized steel surfaces finished even and smooth including errecting in position complete all as specified and as directed. |
| 18 | M&L for pre stressed pre cast RCC (M-25 grade) panels of cross section of panel (300mm x 45mm) reinforced with 4 nos wire of 3mm dia high tensile corbonized steel including fixing in position in between column grooves and jointing and flush pointing of all horizontal and vertical joints af panels ith cement mortar 1:3 complete all as specified and as directed. |
| 19 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat of primer complete all as specified and as directed. |
| 20 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and as directed. |
| 21 | Material and labour for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and as directed. |
| 22 | M&L providing and laying at near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand ), including making joints with or without grooves (thickness of joints except at sharp curve shall not more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 23 | M&L for 35mm thick, precast decoretive cement concrete 1:2:4, Type B-0 using 12.5mm graded stone aggregate as in louvers and jallies, (measured solid) including all mouldings and precast cement concrete 1:2:4 type B-0, pillars/supports to jallies, set in cement mortar 1:4 complete including taking down old Jallies complete all as specified and as directed. |
| 24 | S&F mild steel work in tubular trusses, posts, main and cross beams, hip and jack rafters, purlins, including special shaped washer etc. complete using ERW or induction butt welded tubes, conforming to IS 1161-1979, Gde St-240 complete all as specified and as directed. |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 26 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 27 | S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 28 | M&L for PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete, complete all as specified and as directed. |
| 29 | M&L for PCC type B-1 (1:2:4) using 20mm graded stone aggregate as in coping including necessary form work complete all as specified and as directed |
| 30 | Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc including removing of rubbish from site complete all as specified and as directed. |
| 31 | M&L washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15 mm cement 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in pannels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete all as specified and as directed (Payment for providing grooves shall be made separately). |
| 32 | M and L Forming groove of uniform size 15 mm wide and 15 mm deep in top layer of washed stone grit plaster as per approved pattern using wooden battens nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the grooves complete all as specified and as directed. |
| 33 | Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 34 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 35 | M&L for Brick work (Except Bricks) bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 36 | M&L for Brick work (Except Bricks) bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4) complete all as specified and as directed. |
| 37 | M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed. |
| 38 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 39 | M&L for providing cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) in surfaces channels drains and benching including necessary form work and finishing fair and smooth using extra cement complete all as specified and as directed (forming fair finished channel shall be measured and paid for separately). |
| 40 | M & L PCC (1:2:4) Type B1 75 mm thick using 40 mm graded stone aggregate as floor surfaces concrete complete all as specified and as directed. |
| 41 | M & L PCC (1:4:8) Type D-2 using 100mm thick 40 mm graded stone aggregate as floor surfaces concrete complete all as specified and as directed. |
| 42 | M and L Forming Contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with, sealing compound (Grade A) complete all as specified and as directed. |
| 43 | M&L for preparation of old steel surface of any description exc. 10cm width or girth and applying one coats of synthetic enamel paint over existing shop coat of primer complete all as specified and as directed. |
| 44 | M&L for preparation for new cement concrete, brick curve stone, asbestos cement for surfaces and applying two coat of synthetic enamel paint any description or plain or moulded, over 10 cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed. |
| 45 | M&L for chequered cement concrete tiles 20 cmx20 cmx25 mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified and as directed. |
| 46 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and as directed. |
| 47 | M&L for vitrified paver color tiles 30 cmx30cmx9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed. |
| 48 | S&F in repair precast steel fiber reinforce concrete (SFRC) any colour 75-100mm thick manhole cover with frames (ISI marked) of overall covered area not exceeding 3.00 sqm with clear opening not less than 0.36 sqm any shape ( round, square, rectangular etc.) provided with suittable mild steel rims to prevent from chipping of edges and enable clear opening with are duly protected against corrosion laid over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 49 | Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and as directed Total in Figures 23 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender