Tender For Provn Of Laundry Plant Including Necessary B/R Wks In 161 Mh Mil Stn Pithoragarh
Tender Value
1.98 Crore
Estimated cost
Bid Submission
24 Oct 2026
29 days left
EMD
2.74 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Laundry Plant Including Necessary B/R Wks In 161 Mh Mil Stn Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE A PART-I (BUILDING WORK) |
| 2 | Construction of Laundry Plant for hospital with permanent specifications (Single Storey). |
| 3 | SCHEDULE A PART-II (RETAINING WALL/PROTECTION WORK) for details refer pdf folder |
| 4 | SCHEDULE A PART III ( SITE CLEARANCE & EARTH WORK ) for details refer pdf folder |
| 5 | SCHEDULE A PART IV (MECHANICAL LAUNDRY PLANT) |
| 6 | M&L for Front loading Washing Machine with loading capacity of 60 Kg dry weight per charge heavy duty, Steam heated, (front door, Inner, basket & outer drum all in Stainless Steel). electrically interlocked door, auto timed auto reverse, motorised drain valvewith manual lever to ectivate drain in case of motor fallure with electrices protectionsprovided against single phasing and motor overloading with following techincal. (i)Operation on 3Phase, 415V, 50Hz AC supply(ii) Basket size 1100 x 750 mm(iii) Capacity: 60 Kg dry weight per charge.(iv) Motor 03 HP(v) Wash speed 36 RPM(vi) Loading door opening 650 mm die (vii) Heating Steam Heated(viii) Overall Dimension 1280 x 1760 x 1860 mm LxBxH |
| 7 | M & L for Hydro Extractor with capacity of 60Kg, top loading type with stainless steel outer drum and inner basket, self balancing, direct drive with DC injection brake. Automatic features like, auto timed, auto stopped, complete with electrical motor and panel with following specification:-(i) Basket Size: 1000 x 300mm(ii) Drive motor: 10 HP(iii) Extract speed: not less than 800RPM(iv) Drain: 75 mm dia(v) Operate on 3 ph, 415V, 50Hz AC supply. |
| 8 | M & L for Drying tumbler of capacity 60kg, front loading type specially designed open pocket having stainless steel inner cylinder, double walled glasswool insulated, auto timed, auto reverse, auto temperature control, two separate motor for drive and suction blower, Stainless steel inner basket, Steam heated with following specification:-(i) Basket Size: 1250 x 990 mm(ii) Drive Motor: 2 HP(iii) Blower Motor: 2 HP(iv) Door opening: 800 mm Dia(v) Heating: Steam heated radiator(vi) Exhaust: 300mm dia(vii) Overall size: 1360 x 1700 x 2330 mm. |
| 9 | M & L for Calendering machine, specially designed in front feed and front return, single roller, air suspended polished ironing chest machine fabricated with pneumatic raising & lowering, adjustable pressure & uniform ironing pressure across the entire roll, complete built in electric control panel, drive motor, powerful suction blower, feed conveyor, finger guard, VFD for variable speed with following specification:-(i) Roller: single of size 380 x 2000mm(ii) Drive motor: 1 HP(iii) Suction motor: 0.5 HP(iv) Steam heated(v) air connection: 15mm(vi) exhaust: 75 mm |
| 10 | M & L for Flat work drying ironer machine, specially designed in front feed and front return, single roller, air suspended polished ironing chest machine fabricated with pneumatic raising & lowering, adjustable pressure & uniform ironing pressure across the entire roll, complete built in electric control panel, drive motor, powerful suction blower, feed conveyor, finger guard, VFD for variable speed with following specification:-(i) Roller: single of size 530 x 3000mm(ii) Drive motor: 2 HP(iii) Suction motor: 0.5 HP(iv) Steam heated(v) air connection: 15mm(vi) exhaust: 75 mm |
| 11 | M & L for Dry cleaning machine of capacity 15kg, microproccesor controled with mannual override, open pocket with built in high spin extraction having built-in continous filtration system, stainless steel inner cylinder with SS loading & unloading door, Storage tank, filter tank. Auto timed, auto reverse with following specification:-(i) basket Size: 720 x 350 mm(ii) Drive motor: 3HP(iii) Loading door: 500mm dia(iv) Storage tank: 125 Ltrs(v) Filtration tank: 125 Ltrs(vi) Pump: 1 HP(vii) Extraction speed: Wash-45 to 55 rpm, final extract- 900RPM(viii) Overall dimension: 1050 x 1060 x 1980 |
| 12 | M & L for Vaccume finishing table with electric steam iron(1250 x 750mm) |
| 13 | M & L for Shelf trolley , MOC- Stainless steel of loading capacity 50Kg |
| 14 | M&L For Autoclave Horizontal rectangular type of capacity 240 Itrs and chamber size 450x600x900mm ss 316 outer body ss 304 loading door 500mm dia double door hinge type, data logging, 2 HP water fedding vaccum pump and trolly 02 loading and 2 Unloding ss 304 with PLC /HMI based fully Automatic system is a pressure chamber used to sterize equipment to high pressure saturated steam at 121 degree c for around 20 minuts depending on the size of the loadand the contents peration on 3 phase 415 v 50 HZ Ac supply complete all as specified. |
| 15 | M &L Slucing machine front loading having capacity of 30 Kg Cylinder size 900x500 mm, wash speed 40 to 50 RPM, Extract 400 to 500 RPM and including inner basket, outer drum, front loaded fabricated out of high quality 304 grade stainless steel, fully automatic control panel with automatic forwarding slucing machine shall have provision for reversing timer, digital timers, temerature contriler, indicator, driven by tringular belt for best efficency, simple operation, with start stop buttons and LED display light, all stainless steel parts are polished in gloss finish, all mild steel parts painted with epoxy paint and have 3 coats of epoxy primer layer for long lasting and heavy duty operation steam heated also including electric motor of suitable HP operating on 415 V, 3 Phase, 50 Hz, AC supply and all other components, parts, fixures & accessories like valve for water & steam inlet and drain etc complete all as specified. |
| 16 | SCHEDULE A PART V (SPL WKS (ITEMS OF LAUNDRY PLANT) |
| 17 | M & L for Automatic steam boiler of Capacity 400 kg/hr shell and coil type including one pressure part assembly consisting of closely wound helical vertical membrane coil fabricated out of high temparature resistant ERW tubes and flats, one double jacketed air casing with an aluminium rediator to enclose the pressure parts and serve as an intergral combusion Air Preheater with all safety features with following accessories.(a) Pressure atomised, forced draft, diesel fire burner assembly suitable for LDO firing-01 No(b) Air blower coupled with AC electric motor 3 phase 415 volts, 50 c/s of capacity 1 HP connected to air jacket-01 No(c) Fuel pump coupled to motor - 01 No(d) Motorised Water pump 3 cylinder of capacity 2 HP 3 phase 415 volts, 50 c/s, with surge suppressor and relief valve, mounted on pumping module 01 No(e) Atmospheric ecomomizer and heat optimizer to pre heat feed water - 01 No(f) Electrical control panel cubical type dust and vermin proof made out of CRCA sheet 2mmthick with front hinged shutter having MCB of suitable capacity to control incomer supply with required switch gear, startes power and control circuitry having metering units, Indicators with all safeties, Interlookingcomplete prewired with suitable wire PVCinsulated FRLS type and code taged cable ties etc - 01No(g) Set of standard tool kit-01 No(h) Steam seperator assembly - 01 No(A) PIPING:-(a) Feed water line between optimizer, economizer, feed pump and boiler - 01 Set |
| 18 | (b) Fuel and oil pipe line between filer, fuel pump Y strainer and burner - 01 Set(c) Steam pipe line upto existing header of steam including steam valve(B) MOUNTINGS AND FITTINGS :-(a) Set of isolating valves for indicating instruments - 01 No(C) STEAM:-(a) Main steam stop valve-01 No(b) Auxiliary steam stop valve - 01 No(c) Single port spring loaded safety valve - 01 No(d) Steam pressure switch for burner ON OFF control-01 No(e) Steam pressure indicator-01 No(f) Steam temperature indicator cum switch for high alarm-01 No(g) Steam sefty valve outlet-01 No(D) WATER:-(a) Drain valve for economizer - 01 No(b) Strainer 'Y' type on feed water line - 01 NoRelief valve on feed water pump - 01 No(d) Non return valve on feed water line - 01 No(e) Blow down valve - 01 No ,(f) Low water level alarm switch on economizer-01 No(g) Blow down valve limit switch - 01 No ,(E) FUEL:-(a) Main filter-01 No, (b) Strainer 'Y' type on fuel oil line - 01 No(c) Fuel pressure indicator - 01 No(F) INSTRUMENTS, CONTROLS AND SAFETIES :-(a) Bumer programmer with matching flame detector - 01 No(b) Set Audio visual alarms for abnormal conditions-01 No(G) AIR AND FLUE GAS :-(a) Suction blower ,(b) Flue gas outlet on economizer. |
| 19 | M & L for Dry linen trolley of loading capacity 50kg, Size 40\\" x 30\\" x 34\\" |
| 20 | M & L for Wet Linen Trolley of loading capacity, Size 40\\" x 30\\" x 34\\" |
| 21 | M & L for Rolling/mobile table top size 1130 x 730 |
| 22 | M & L for Compressor 3HP. Make: universal/elgi/ingersoll rand |
| 23 | M & L for Rolling table Large SS construction of size 2200 x 730mm 04 Nos swelling Wheels |
| 24 | SCHEDULE A PART VI ( ROAD PATH AND CULVERT ) For details refer pdf folder |
| 25 | SCHEDULE A PART VII- A (SEWAGE DISPOSAL) for details refer pdf folder |
| 26 | SCHEDULE A PART VII- B (SEWAGE DISPOSAL) |
| 27 | Supply only liquid water proofing compound complete all as specified and directed by Engineer-In- Charge. |
| 28 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds mitred/ stoped ends etc. |
| 29 | RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users. |
| 30 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M dia X 4.5 M effective depth |
| 31 | SCHEDULE A PART VIII-A ( AREA DRAINAGE ) for details refer pdf folder |
| 32 | SCHEDULE A PART VIII-B ( AREA DRAINAGE ) for details refer pdf folder |
| 33 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds mitred/ stoped ends etc. |
| 34 | M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 35 | SCHEDULE A PART IX (EXTERNAL ELECTRIC SUPPLY) |
| 36 | Supplying, laying & testing cable XLPE insulated, screened, PVC bedded, galvanised steel srtip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core |
| 37 | M&L for providing dry sand as in cushioning to underground cable including punning down of sand in layers as specified and directed. |
| 38 | M&L for brick protection cover of UG cable by using old size sub class B' common burnt clay building bricks, laid dry and flat abutting each other with width equal to length of the brick and gap between adjacent brick nexc10mm complete all as specified and directed. |
| 39 | Earthing complete with galvanised steel earth plate electrode 60×60cm. × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below nomal ground level, connected to galvanised earth lead wire 4. 0mm dia by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electrical piate No 3 connected to earthing testpoint all as specified or indicated including testing on completion |
| 40 | M&L for Gl tubing light grade 40mm bore for passing throughcables under the floor along the wall or along the pole complete all as specified and directed |
| 41 | M&L for Cable route indicator shown \\"LT UG cables\\" painted inblue/red colour and root of cable with aero made of Cl in suitable eleptical shape and fixed in suitable sıze MS angle/rod, 60 cm long ( all word embosed) and embaded in PC block of size 20 x 20 x 50cm in ground, complete all as specified and directed |
| 42 | Supply, installation, commissioning and testing of indoor wall mounting LT panel board made out of CRCA sheet 2 mm thick vermin proof factory made with angle and aluminium bus bar of capacity 200 Amps for 3 phase and neutral with nessary angle iron 50 X 6mm support frame including two coats powder painting over a coat of red oxide primer and grout in PCC complete all as specified and directed comprising of the following:-INCOMING(a) Aluminium bus bar of capacity 200 Amps for 3 phase with neutral one job(b) MCCB 415 V. 100A, 4 pole. 25 KA with over load, short circuit and earth fault protection with earth module breaking capacity 16 KA.01 Nos.(c) Digital votlmeter 0-500 volts square flush mounted with inbuild selector switch -01 Nos.(d) Digital ampere meter square flush mounted with inbuild selector switch -01 Nos(e) Indicator lamps RYB LED type - 01 Set of three.(e) CT coils200/5 A-01 Nos.OUT GOING(a) MCCB 63A, 415V. 4 pole with over load short circuit protection, breaking capacity 16 KA - 1Nos) （bMCCB 40 A 415 V 4POLE. with over load short circuitprotection, breaking capacity 16 KA - 01 Nos _ |
| 43 | SCHEDULE A PART X (EXTERNAL WATER SUPPLY) |
| 44 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes of size PN-16 Pipe, 32mm OD (SDR-7.4) confirming to IS: IS:15801.UV stabilized & anti-microbial fusioN welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction by Engineer-in-Charge. |
| 45 | Providing and fixing gun metal gate valve of size 32mm dia with C.l Wheel of approved quality (screwed end) as per directed by Engineer-in-Charge |
| 46 | M& L for cutting existing pipe of size 50mm and making threading and suitable work for conncetion for pipes all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 29 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 36 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender