Tender For Construction Of Vehicle & Implement Shed At Kvk Bajaura Distt. Kullu Under Cskhpkv, Pal Ur.
Tender Value
4.02 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
4 days left
EMD
8040
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Vehicle & Implement Shed At Kvk Bajaura Distt. Kullu Under Cskhpkv, Pal Ur.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundations, trenches etc.in earth work in all kind of soil such as pick work, jumper work including chiseling/wedging work in dry or saturated conditions up to any depth including stacking the excavated soil serviceable and unserviceable materials separately and then in fifteen centimeters layers when required into plinth side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil, unserviceable material and stacking the serviceable materials as directed by the Engineer-in-charge within all leads & lifts and disposed materials to be neatly leveled. |
| 2 | Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded crushed stone aggregate 40mm.nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth by using mechanical mixer including entire carriage of material within all leads & lifts. |
| 3 | Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately) including entire carriage of material within all leads & lifts . |
| 4 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm.so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtr. and removal of the same for insitu-reinforced concrete & plain concrete work including entire carriage of material within all leads & lifts.Foundation, footings basis of columns etc. and mass concrete |
| 5 | Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded crushed stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work by using mechanical mixer & vibrator including entire carriage of material within all leads & lifts.Foundation footings bases of columns and the like and mass concrete. |
| 6 | Providing mild steel/tor steel reinforcement for RCC work including bending, binding and placing in position complete up to all floor level: tor steelincluding entire carriage of material within all leads & lifts. (Amba/Kamdhenu/Jai Bharat make) |
| 7 | Providing and fixing Steel work welded in built up sections, trusses and framed work,including cutting, hoisting fixing in position and applying a priming coat of red lead paint including entire carriage of material within all leads & lifts. (Amba/Kamdhenu/Jai Bharat make) |
| 8 | In single stanchions composed of rolled steel joists or angles or channel with caps, bases, splices, angles brackets gratings, frame guards etc. |
| 9 | In trusses and trussed purlins in building. |
| 10 | In gratings framed guard bars, ladders, railling, brackets and similar works. |
| 11 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including entire carriage of material within all leads & lifts. (Tata Duroshine make) |
| 12 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including entire carriage of material within all leads & lifts. (Tata Duroshine make) |
| 13 | Providing and fixing MS BP sheet 2.00 mm thick in eaves board /fascia /soffits/ceiling including cutting, fixing and welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer –in- charge (Base members of steel work shall be measured & paid separately) including entire carriage of material within all leads & lifts. |
| 14 | Providing & laying 1st.class brick work using common burnt clay building bricks in super-structure above plinth level up to all floor level with cement mortar 1:6 (1cement:6sand) including entire carriage of material within all leads & lifts. |
| 15 | Providing under layer for plinth protection of 75mm.thick (unconsolidated) bed dry brick/stone aggregated 40mm.nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including entire carriage of material within all leads & lifts. |
| 16 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded crushed stone aggregated 20mm nominal size) including entire carriage of material within all leads & lifts. |
| 17 | Providing and laying 15mm.cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm.in girth and finished even and smooth in cement mortar 1:6(1cement : 6sand) including entire carriage of material within all leads & lifts. |
| 18 | Providing and laying Cement concrete flooring 1:2:4(1cement:2sand: 4graded stone aggregate 20mm.nominal size) laid in one layer finished with a floating coat of neat cement:50mm.thick including entire carriage of material within all leads & lifts. |
| 19 | Providing and fixing glass strips 40x4 mm in joints of floors including entire carriage of material within all leads & lifts. |
| 20 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including entire carriage of material within all leads & lifts. |
| 21 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matters Enamel white paint including entire carriage of material within all leads & lifts (Nerolac/Asian 1st quality make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender